Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Deleycon MK-MK172 VGA Monitor Cable. This cable is designed to transmit analog video signals between devices equipped with VGA (D-Sub 15-pin) ports, such as computers, monitors, and projectors. It does not transmit audio signals.

Image: The Deleycon MK-MK172 VGA Monitor Cable, featuring two black male D-Sub 15-pin connectors with gold-plated pins and securing screws, connected by a durable black cable.
Setup Instructions
Follow these steps to correctly connect your Deleycon MK-MK172 VGA cable:
- Identify Ports: Locate the VGA output port on your source device (e.g., computer) and the VGA input port on your display device (e.g., monitor, projector). VGA ports are typically blue and have 15 pins in three rows.
- Connect Cable: Insert one end of the Deleycon MK-MK172 VGA cable into the VGA output port of your source device.
- Connect to Display: Insert the other end of the VGA cable into the VGA input port of your display device.
- Secure Connection: Gently tighten the two thumbscrews on each VGA connector to ensure a secure and stable connection. This prevents accidental disconnections and signal loss.

Image: A close-up view of the gold-plated 15-pin D-Sub male connectors with securing screws, highlighting their robust design.

Image: A Deleycon VGA cable connecting the VGA output port of a desktop computer to the VGA input port of a computer monitor.

Image: A Deleycon VGA cable connecting the VGA output port of a desktop computer to the VGA input port of a projector.
Operating Instructions
Once the cable is securely connected:
- Power On Devices: Turn on your computer (source device) and your monitor or projector (display device).
- Select Input Source: On your display device, use its menu or input selection button to choose the correct VGA input source. This is often labeled 'VGA', 'PC', or 'D-Sub'.
- Display Configuration: Your computer should automatically detect the display. If not, you may need to adjust display settings in your operating system (e.g., 'Display Settings' on Windows, 'Displays' on macOS) to extend or duplicate your desktop.
- Video Only: Remember that this VGA cable transmits video signals only. For audio, a separate audio cable (e.g., 3.5mm jack) is required.
Maintenance
To ensure the longevity and optimal performance of your Deleycon MK-MK172 VGA cable:
- Keep Clean: Regularly wipe the cable and connectors with a dry, soft cloth to remove dust and debris. Avoid using liquid cleaners directly on the connectors.
- Avoid Kinks and Bends: Do not excessively bend or kink the cable, especially near the connectors, as this can damage the internal wiring.
- Proper Storage: When not in use, coil the cable loosely and store it in a dry, cool place away from direct sunlight and extreme temperatures.
- Handle with Care: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself.
Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
- No Signal on Display:
- Ensure both the source device and display device are powered on.
- Verify that the VGA cable is securely connected at both ends, with the thumbscrews tightened.
- Confirm that the correct input source (VGA/PC/D-Sub) is selected on your display device.
- Test the cable with another device or try a different VGA port if available.
- Poor Image Quality (Fuzzy, Distorted, or Flickering):
- Ensure the cable connections are tight and secure.
- Check the display resolution settings on your computer. Ensure it is set to a resolution supported by your monitor and the VGA standard.
- Inspect the cable for any visible damage or kinks.
- If possible, try a different VGA cable to rule out a cable fault.
- Incorrect Colors:
- Check the color settings on your display device and computer.
- Ensure the cable is not damaged and pins are not bent.
Specifications
| Feature | Detail |
|---|---|
| Model | MK172 |
| Brand | deleyCON |
| Connector Type | VGA (D-Sub 15-pin) |
| Connector Gender | Male-to-Male |
| Number of Contacts | 15 |
| Cable Type | VGA |
| Cable Length | 1.5 meters |
| Compatible Devices | Monitor, Personal Computer, Projector, Television |
| Special Feature | Braided |
| Color | Black |

Image: A diagram illustrating various devices compatible with the VGA cable, including laptops, desktop computers, projectors, televisions, and monitors.
Warranty and Support
The Deleycon MK-MK172 VGA Monitor Cable is covered by the manufacturer's standard warranty. For specific warranty details, claims, or technical support, please refer to the official deleyCON website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, please visit the official deleyCON support page or contact their customer service.