Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Bandai Master Grade MG 1/100 RX-93 Nu Gundam Ver.GFT plastic model kit. This kit is a 1/100 scale reproduction of the RX-93 Nu Gundam as it appeared in the "DOME-G" video facility at Gundam Front Tokyo, featuring enhanced details throughout its design.
Setup and Assembly
The RX-93 Nu Gundam Ver.GFT is a sophisticated plastic model kit designed for assembly. Please follow the step-by-step instructions provided in the included printed instruction booklet carefully. Ensure you have all necessary tools, such as nippers for cutting parts from runners, a hobby knife for trimming, and tweezers for decal application.
Key Assembly Features:
- Armor Expansion and Purge: The kit incorporates a new "activation" element, allowing various parts of the mobile suit to expand and armor to purge, altering its appearance.
- Psychoframe Reproduction: Special light-collecting resin is used in areas exposed by partial expansion and armor purge to replicate the glowing psychoframe effect seen in the video.
- Fin Funnels: The Fin Funnels on the back can be configured in two modes: the standard mode with six units on one side, and a double Fin Funnel equipped mode with three units on each side.
- Dedicated Display Base: A specialized display base is included. When combined with additional effect parts (sold separately), it allows for dynamic displays, including the Fin Funnels in their firing state.
- Detailed Armor: Some parts are molded in two-tone colors to achieve a precise armor appearance. Color reproduction stickers made from special materials are also included.
- Water Slide Decals: Large water slide decals are provided to apply original markings, enhancing the model's authenticity.
- LED Unit Compatibility: An LED unit (sold separately) can be housed in the chest to illuminate the head's camera eye.
- Emotion Manipulator SP: The kit includes "Emotion Manipulator SP" hands, featuring movable finger joints and a crank-movable thumb base for realistic posing.
Image: The fully assembled RX-93 Nu Gundam Ver.GFT model kit, showcasing its detailed design and dynamic posing capabilities on its display base.
Image: Detailed views highlighting the intricate design of the model's head, articulated hands, and leg armor, demonstrating the kit's high level of detail.
Operating the Model
Once assembled, your Nu Gundam model can be posed in various dynamic stances thanks to its highly articulated joints. Handle the model with care to avoid damaging delicate parts.
Posing and Features:
- Joint Articulation: Utilize the numerous points of articulation in the limbs, torso, and head to create desired poses.
- Fin Funnel Deployment: Adjust the Fin Funnels on the back to replicate either the standard or double-equipped modes.
- Armor Expansion: Carefully manipulate the armor parts to demonstrate the expansion and purge features. Refer to the assembly manual for specific mechanisms.
- Emotion Manipulator Hands: The articulated fingers allow for gripping weapons or expressive hand gestures.
- LED Unit (Optional): If an LED unit is installed in the chest, activate it to illuminate the camera eye. Refer to the LED unit's separate instructions for power and operation.
Maintenance
Proper maintenance ensures the longevity and appearance of your model kit.
Cleaning and Storage:
- Dust Removal: Regularly dust the model using a soft brush or a can of compressed air. Avoid abrasive materials that could scratch the plastic or decals.
- Cleaning Stains: For stubborn marks, gently wipe with a soft cloth slightly dampened with water. Avoid harsh chemicals or solvents, as they can damage the plastic or paint.
- Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration and material degradation. If possible, use a display case to protect it from dust and accidental damage.
- Joint Care: If joints become loose over time, a thin layer of clear nail polish or hobby-specific joint tightener can be applied to the male peg and allowed to dry before reassembly.
Troubleshooting
Here are solutions to common issues you might encounter:
- Loose Parts: If a part does not fit snugly, apply a small amount of plastic cement (for permanent bond) or a thin layer of clear coat/nail polish (for removable parts) to the peg or joint. Allow to dry completely before reattaching.
- Decals Not Sticking: Ensure the surface is clean and dry. Use decal setting solution to help the decal conform to the surface and adhere better.
- Broken Parts: For minor breaks, plastic cement can be used. For more significant damage, consider using a stronger adhesive like super glue, but be aware it can leave white residue if not applied carefully.
- Difficulty Posing: If joints are too stiff, gently work them back and forth. Do not force them, as this can cause breakage.
Specifications
| Feature | Detail |
|---|---|
| Brand | Bandai |
| Model Name | Master Grade MG 1/100 RX-93 Nu Gundam Ver.GFT |
| Scale | 1/100 Scale |
| Product Type | Plastic Model Assembly Kit (Gunpla) |
| Subject Character | Nu Gundam |
| Item Dimensions (L x W x H) | 15.83 x 12.83 x 4.49 inches |
| Item Weight | 2.69 Ounces |
| Number of Pieces | 1 (refers to the kit as a whole, not individual parts) |
| Recommended Age Range | Kid (typically 8+ for Master Grade kits) |
Warranty Information
Specific warranty information for this Bandai model kit is not provided with the product details. For any concerns regarding manufacturing defects or missing parts, please refer to the contact information provided in the original packaging or contact Bandai customer support directly.
Customer Support
For further assistance, questions, or to report missing/damaged parts, please refer to the contact details provided on the product packaging or visit the official Bandai Hobby website. Please have your product model number (RX-93 Nu Gundam Ver.GFT) and any relevant purchase information ready when contacting support.
