1. Product Overview
The Vipack SCLM200-R Le Mans Car Bed is a children's bed designed with a race car aesthetic. It features a red lacquered MDF construction, complete with decorative wheels, chrome accents, and a rear spoiler. This bed is designed to accommodate a mattress of 90 x 200 cm and includes a slatted base.
Image 1.1: The Vipack SCLM200-R Le Mans Car Bed in red, showcasing its race car design with wheels and a spoiler.
2. Safety Information
- This bed is suitable for children aged 3 years and older.
- The elevated edges of the bed are designed to enhance child safety during sleep.
- Ensure the bed is placed on a level surface to prevent instability.
- The maximum recommended weight for this bed is 75 kg. Do not exceed this limit.
- Regularly check all screws and fasteners to ensure they remain tight and secure.
- Do not allow children to jump on the bed, as this can cause damage or injury.
3. Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged.
- Bed frame components (MDF, lacquered red)
- Slatted base (somier)
- Assembly hardware (screws, dowels, etc.)
Note: A mattress, bedding, and optional LED lighting are not included with the bed frame and must be purchased separately.
4. Setup and Assembly Instructions
Assembly of the Vipack SCLM200-R bed is required. While designed for easy installation, it is recommended to have two adults for assembly.
4.1. Before You Begin
- Clear a spacious area for assembly.
- Lay out all components on a soft, clean surface (e.g., a blanket or carpet) to prevent scratches.
- Identify all parts by comparing them with the provided parts list (if included in the physical package).
- Gather necessary tools: typically a screwdriver (Phillips head), and possibly a rubber mallet.
4.2. Assembly Steps
- Begin by attaching the side panels to the headboard and footboard using the provided hardware. Ensure all connections are firm but do not overtighten initially.
- Secure the decorative elements such as the wheels and chrome accents to the bed frame as indicated in the diagrams (refer to physical manual for diagrams).
- Attach the red spoiler to the rear of the bed frame.
- Once the main frame is assembled, carefully place the slatted base into the designated supports within the bed frame.
- After all components are in place, systematically tighten all screws and fasteners to ensure the bed is stable and secure.
- Place a 90 x 200 cm mattress onto the slatted base.
5. Operating and Usage
The Vipack SCLM200-R Le Mans Car Bed is designed for comfortable sleeping and resting for children aged 3 and above. Ensure that the mattress used is of the correct dimensions (90 x 200 cm) to fit securely within the bed frame.
The bed has a maximum weight capacity of 75 kg. Adhering to this limit ensures the longevity and safety of the product. Avoid activities that could place excessive stress on the bed frame, such as standing or jumping.
6. Maintenance and Care
- Cleaning: Clean the lacquered MDF surfaces with a soft, damp cloth. For stubborn marks, a mild soap solution can be used, followed by wiping with a clean, dry cloth.
- Avoid Chemicals: Do not use abrasive cleaners, harsh chemicals, or solvents, as these can damage the lacquered finish.
- Fastener Check: Periodically (e.g., every 3-6 months) check all screws and fasteners to ensure they remain tight. Retighten if necessary to maintain structural integrity.
- Environmental Conditions: Protect the bed from prolonged exposure to direct sunlight and extreme temperature fluctuations, which can affect the material and finish.
7. Troubleshooting
7.1. Assembly Difficulties
- Parts do not fit: Double-check the assembly instructions and diagrams. Ensure that components are oriented correctly and that you are using the right hardware for each step. Sometimes, parts may appear similar but have subtle differences.
- Missing hardware: If any screws, dowels, or other small parts are missing, do not attempt to substitute them with non-original parts. Contact Vipack customer support for replacements.
7.2. Stability Issues
- Bed feels wobbly: Ensure all screws and fasteners are fully tightened. Verify that the bed is placed on a completely level floor. Uneven flooring can cause instability.
- Squeaking noises: Squeaking can often be resolved by retightening all assembly hardware. If the issue persists, check for any friction points between wooden components.
8. Product Specifications
| Brand | Vipack |
| Model Number | SCLM200-R |
| Color | Red |
| Material | Engineered Wood (MDF) |
| Product Dimensions (L x W x H) | 247 x 111 x 66 cm |
| Product Weight | 59.52 kg |
| Recommended Mattress Size | 90 x 200 cm |
| Maximum Weight Recommendation | 75 kg |
| Assembly Required | Yes |
| First Available Date | 27 October 2013 |
9. Warranty and Support
The Vipack SCLM200-R Le Mans Car Bed comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For any questions regarding assembly, missing parts, or to make a warranty claim, please contact Vipack customer service. Refer to your purchase documentation or the retailer's website for specific contact details.
For more information about Vipack products, visit the official Vipack website.
