Instruction Manual
TE Connectivity 62409-1 PCB Tab
Product Overview
This manual provides essential information for the TE Connectivity 62409-1 PCB Tab. This component is a brass, straight tab designed for Printed Circuit Board (PCB) applications, featuring specific dimensions and a tin finish. It is intended for use in electronic assemblies requiring reliable electrical connections.
Figure 1: TE Connectivity 62409-1 PCB Tab. This image displays the small, rectangular brass tab with two flat, straight prongs. The component has a metallic, tin-plated appearance and is designed for insertion into a Printed Circuit Board.
Setup and Installation
The 62409-1 PCB Tab is designed for direct mounting onto a Printed Circuit Board. Proper installation is crucial for optimal performance and reliability.
- Preparation: Ensure the PCB has appropriately sized and spaced holes for the tab's prongs. The PCB thickness should accommodate the 0.055 inch PCB dimension of the tab.
- Orientation: Carefully align the two prongs of the tab with the corresponding holes on the PCB. The tab is straight, indicating a direct insertion.
- Insertion: Gently insert the prongs into the PCB holes. Apply even pressure to avoid bending or damaging the prongs or the PCB.
- Soldering (Optional/Recommended): For a secure electrical and mechanical connection, solder the prongs to the PCB pads. Use appropriate soldering techniques and materials for tin-plated brass components.
- Inspection: After installation, visually inspect the connection to ensure the tab is seated correctly and the solder joints (if applicable) are sound.
Note: Always handle electronic components with care to prevent electrostatic discharge (ESD) damage. Use appropriate ESD protection measures.
Operating Considerations
As a passive electrical component, the 62409-1 PCB Tab does not have active operational modes. Its function is to provide a stable electrical connection within a circuit. Ensure the environmental conditions (temperature, humidity) of the final assembly are within the typical operating ranges for electronic components to prevent material degradation.
Maintenance
The 62409-1 PCB Tab is a maintenance-free component once properly installed. Regular maintenance is not required. If the component is part of an assembly that undergoes cleaning, ensure that cleaning agents are compatible with brass and tin plating to avoid corrosion or damage.
Troubleshooting
Issues related to the 62409-1 PCB Tab typically stem from improper installation or damage during handling. Common troubleshooting steps include:
- Poor Connection: If an electrical connection is intermittent or absent, check for proper seating of the tab on the PCB and inspect solder joints for cold solder, bridges, or cracks.
- Physical Damage: Inspect the tab for bent prongs, cracks, or other physical damage that may have occurred during handling or installation. Damaged components should be replaced.
- Corrosion: In rare cases, exposure to harsh environments might lead to corrosion. Ensure the operating environment is suitable for the component's material.
If a component is found to be defective, it should be replaced with a new, identical part.
Specifications
| Attribute | Value |
|---|---|
| Model Number | 62409-1 |
| Brand | TE Connectivity |
| Description | Tab Brass Straight PCB 0.250 x 0.032 in. 0.055 in. (PCB) Tin |
| Contact Material | Brass |
| Finish | Tin |
| Dimensions (Tab) | 0.250 x 0.032 inches |
| PCB Thickness (Max) | 0.055 inches |
| Type | Straight PCB Tab |
Warranty and Support
For information regarding warranty terms, technical support, or product returns, please contact TE Connectivity directly or refer to the official TE Connectivity website. Provide the model number (62409-1) and any relevant purchase details when seeking support.
TE Connectivity Official Website: www.te.com
