Kuvings Centrifugal Juicer NJ-9700U-P Instruction Manual

1. Introduction

Thank you for choosing the Kuvings Centrifugal Juicer NJ-9700U-P. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new juicer. Please read all instructions carefully before first use and retain this manual for future reference.

2. Important Safeguards

• Electrical Safety: This appliance is designed for 110V USA/CANADA USE ONLY. Do not use with voltage converters or adapters. Ensure the power cord is not damaged and is plugged into a grounded outlet.
• Children: Keep the appliance out of reach of children. Close supervision is necessary when the appliance is used near children.
• Moving Parts: Avoid contact with moving parts. Always ensure the juicer is properly assembled and the locking arm is securely in place before operating.
• Cleaning: Always unplug the juicer from the power outlet before cleaning. Do not immerse the motor base in water or other liquids.
• Maintenance: Do not attempt to repair the appliance yourself. Contact qualified service personnel for any repairs.
• Usage: Use the juicer only for its intended household purpose. Do not use outdoors.

3. Parts Identification

Familiarize yourself with the components of your Kuvings Centrifugal Juicer:

• Motor Base: The main unit containing the motor and control dial.
• Juicer Cover: Transparent lid that covers the juicing assembly.
• Pulp Container: Collects the extracted pulp.
• Juice Container: Collects the fresh juice.
• Food Pusher: Used to guide fruits and vegetables into the feed chute.
• Stainless Steel Juicing Bowl: The main bowl where juicing occurs.
• 3D Mesh Screen / Filter Basket: Separates juice from pulp.
• Locking Arm: Secures the juicer cover to the motor base.

Image: Kuvings Centrifugal Juicer NJ-9700U-P with its main parts, including the motor base, juicing assembly, and collection containers.

4. Assembly

Follow these steps to assemble your juicer before first use:

1. Place the Motor Base on a clean, dry, and stable surface.
2. Insert the Stainless Steel Juicing Bowl onto the motor base, ensuring it is seated correctly.
3. Place the 3D Mesh Screen / Filter Basket firmly into the juicing bowl. Ensure it clicks into place.
4. Position the Juicer Cover over the juicing bowl and mesh screen. Align the feed chute with the opening on the motor base.
5. Raise the Locking Arm and secure it into the grooves on the juicer cover. You should hear a click, indicating it is locked.
6. Place the Pulp Container under the pulp spout and the Juice Container under the juice spout.

Image: Fully assembled Kuvings Centrifugal Juicer NJ-9700U-P, ready for operation.

5. Operating Instructions

5.1. Preparation of Ingredients

• Wash all fruits and vegetables thoroughly.
• Cut larger fruits and vegetables into smaller pieces that fit easily into the feed chute.
• Remove large seeds (e.g., from peaches, plums) and hard pits.
• For citrus fruits, peel the skin before juicing.

5.2. Juicing Process

1. Ensure the juicer is correctly assembled and plugged into a 110V outlet.
2. Place the prepared fruits and vegetables into the feed chute.
3. Turn the control dial to the desired speed setting (Low or Turbo).
4. Use the Food Pusher to gently guide the ingredients down the feed chute. Do not force ingredients.
5. Allow the juicer to process all ingredients. Juice will flow into the juice container, and pulp will collect in the pulp container.
6. Once juicing is complete, turn the control dial to the 'Off' position and unplug the appliance.

Image: The Kuvings Centrifugal Juicer in operation, extracting juice from various produce.

5.3. Tips for Best Results

• Juice softer ingredients before harder ones to maximize juice yield.
• For leafy greens, roll them tightly before feeding into the chute.
• Do not overfill the feed chute; feed ingredients gradually.

6. Disassembly and Cleaning

Regular cleaning ensures optimal performance and longevity of your juicer.

1. Ensure the juicer is unplugged from the power outlet.
2. Lower the Locking Arm to release the juicer cover.
3. Remove the Juicer Cover, 3D Mesh Screen / Filter Basket, and Stainless Steel Juicing Bowl from the motor base.
4. Empty the Pulp Container and Juice Container.
5. Rinse all removable parts (juicer cover, food pusher, juicing bowl, mesh screen, pulp container, juice container) under running water.
6. Use the provided cleaning brush to remove any pulp residue from the mesh screen. For stubborn residue, soak parts in warm, soapy water before scrubbing.
7. Wipe the Motor Base with a damp cloth. Never immerse the motor base in water.
8. Allow all parts to dry completely before reassembling or storing.

Image: Close-up view of the 3D Mesh Screen, highlighting its fine filtration capabilities.

Image: Close-up view of the Stainless Steel Juicing Bowl, emphasizing its durable construction.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product packaging or visit the official Kuvings website. Keep your purchase receipt as proof of purchase for warranty claims.

For additional information or to explore other Kuvings products, visit the Kuvings Store on Amazon.