First Alert Bark Genie Automatic Bark Control Device User Manual

Introduction

This manual provides instructions for the proper setup, operation, and maintenance of your First Alert Bark Genie Automatic Bark Control Device. Please read this manual thoroughly before using the device to ensure safe and effective operation.

The First Alert Bark Genie Automatic Bark Control Device is designed to deter excessive barking in dogs by emitting a safe, ultrasonic sound that is audible only to dogs. This device can be used both indoors and outdoors.

Safety Information

• This device is intended for use with dogs only.
• Keep out of reach of children.
• Do not immerse the device in water. While weatherproof, it is not designed for submersion.
• The ultrasonic sound is generally harmless to humans and most animals, but prolonged exposure at close range may be uncomfortable for some individuals.
• The effectiveness of the ultrasonic sound correction may vary among individual dogs. Some dogs may not respond to the device.
• Ensure the device is placed in a location where the ultrasonic sound can effectively reach the dog without obstruction.

Package Contents

Verify that all items are present in your package:

• First Alert Bark Genie Automatic Bark Control Device (Model FABCU1G)
• User Manual (this document)
• (Battery not included, typically requires one 9-volt battery)

Setup

1. Powering the Device

The Bark Genie device operates on a 9-volt battery (not included). To install the battery:

1. Locate the battery compartment cover on the back or bottom of the device.
2. Open the compartment cover.
3. Insert a fresh 9-volt alkaline battery, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

Alternatively, an AC adapter (not included) can be used for continuous power. Refer to the manufacturer's recommendations for compatible AC adapters.

2. Placement

Optimal placement is crucial for the device's effectiveness. Consider the following:

• Place the device within 50 feet of the area where your dog typically barks excessively.
• Ensure the front of the device, where the ultrasonic emitter is located, faces the dog and is not obstructed by furniture, walls, or dense foliage.
• For outdoor use, place the device in a location protected from direct heavy rain or extreme weather, despite its weatherproof design.
• The device can be placed on a flat surface, mounted on a wall, or hung using the integrated handle.

Image: The First Alert Bark Genie Automatic Bark Control Device placed on a wooden table, demonstrating typical indoor placement. A dog is visible in the background, out of focus.

Image: The First Alert Bark Genie Automatic Bark Control Device attached to a wooden fence post in an outdoor setting, illustrating outdoor placement options.

Operating Instructions

1. Adjusting Sensitivity Levels

The device features 3 adjustable levels of sensitivity to detect barking. A higher sensitivity setting means the device will trigger more easily with softer or more distant barks.

1. Locate the sensitivity switch or dial on the device.
2. Select the desired sensitivity level:
   • Low: For loud barks or close proximity.
   • Medium: Standard setting for most situations.
   • High: For softer barks or greater distance.
3. Test the setting by having your dog bark (or simulating a bark) to ensure the device responds appropriately. A small indicator light may flash when the ultrasonic sound is emitted.

Image: A close-up front view of the First Alert Bark Genie device, highlighting the ultrasonic emitter and microphone for bark detection.

2. Operation

Once powered and placed, the device operates automatically:

• When the device detects barking within its range and sensitivity setting, it will emit a high-frequency ultrasonic sound.
• This sound is designed to be startling and unpleasant to dogs, interrupting their barking behavior.
• The sound is typically inaudible to humans.
• The device will stop emitting the sound once the barking ceases.

Note: Consistency is key. For best results, ensure the device is always active when you wish to deter barking.

Maintenance

1. Cleaning

• Wipe the device with a soft, dry cloth.
• Do not use abrasive cleaners or solvents, as these can damage the casing or internal components.
• Ensure the microphone and ultrasonic emitter are free from dust or debris for optimal performance.

2. Battery Replacement

Replace the 9-volt battery when the device's performance diminishes or if the indicator light (if present) suggests low battery. Follow the battery installation steps in the "Setup" section.

Troubleshooting

Specifications

• Model: FABCU1G
• Brand: First Alert
• Dimensions (LxWxH): 6 x 3.75 x 7 inches (approximate, based on product dimensions)
• Weight: 0.69 Pounds (approximate, without battery)
• Material: Plastic
• Power Source: 9-volt battery (not included) or compatible AC adapter (not included)
• Effective Range: Up to 50 feet (approximate)
• Sensitivity Levels: 3 adjustable levels
• Weather Resistance: Weatherproof (not submersible)

Warranty and Support

For warranty information or technical support, please refer to the contact information provided with your purchase documentation or visit the official First Alert website. Keep your proof of purchase for warranty claims.

For additional assistance, you may contact First Alert customer service.