Beurer GS 200 Allium

Download PDF
Contents

Beurer Electronic Glass Weight Scale

Model: GS 200 Allium

Brand: Beurer

1. Introduction

Thank you for choosing the Beurer GS 200 Allium Electronic Glass Weight Scale. This manual provides important information on the proper setup, operation, and maintenance of your new scale. Please read it thoroughly before first use and keep it for future reference.

Beurer GS 200 Allium Electronic Glass Weight Scale, top view

Figure 1: Beurer GS 200 Allium Electronic Glass Weight Scale

This image shows the full Beurer GS 200 Allium scale from a top-down perspective, highlighting its blue glass surface with a decorative white dandelion design and the digital display showing '62.4 kg'.

2. Safety Information

  • Always place the scale on a firm, level surface to ensure accurate readings. Avoid carpets or uneven floors.
  • The scale has a glass platform. Step on and off carefully to prevent slipping, especially when wet.
  • Do not jump on the scale or subject it to sudden impacts.
  • Keep the scale away from extreme temperatures, direct sunlight, and high humidity.
  • Do not attempt to disassemble or repair the scale yourself. Contact qualified service personnel.
  • Keep batteries out of reach of children. If swallowed, seek immediate medical attention.

3. Package Contents

Please check that all items are present and undamaged:

  • Beurer GS 200 Allium Electronic Glass Weight Scale
  • 2 x Lithium Metal Batteries (CR2032)
  • Instruction Manual (this document)

4. Setup

4.1. Battery Installation

  1. Turn the scale over to access the battery compartment on the underside.
  2. Open the battery compartment cover.
  3. Insert the 2 x CR2032 Lithium Metal batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.

4.2. Initial Use and Placement

Place the scale on a hard, flat surface. Avoid soft surfaces like carpets, which can affect accuracy. The scale is ready for use once the batteries are installed.

5. Operating Instructions

5.1. Weighing Process

  1. Gently tap the scale surface with your foot or step directly onto it. The scale will automatically turn on due to its vibration sensor.
  2. Wait for the display to show '0.0' kg (or your selected unit).
  3. Step onto the scale barefoot, standing still and centered on the glass platform.
  4. Your weight will be displayed on the LCD screen. The reading will stabilize and then flash briefly before remaining constant.
  5. Step off the scale. The scale will automatically turn off after a few seconds of inactivity to conserve battery life.
Close-up of the scale's digital display

Figure 2: Digital Display

This image provides a close-up view of the scale's LCD display, clearly showing the large digits '62.4' and the 'kg' unit indicator.

5.2. Unit Conversion (kg/lb/st)

The Beurer GS 200 Allium scale allows you to switch between kilograms (kg), pounds (lb), and stones (st). To change the unit:

  1. Locate the unit conversion button on the underside of the scale, usually near the battery compartment.
  2. Press the button to cycle through the available units (kg, lb, st).
  3. The selected unit will be displayed on the screen when you next use the scale.

5.3. Automatic On/Off Function

The scale features an automatic on/off function. It turns on when you step on it (or gently tap it) and automatically turns off after approximately 10 seconds of inactivity, helping to preserve battery life. There is no manual on/off button.

6. Maintenance

6.1. Cleaning

  • Clean the scale regularly with a damp cloth and a mild detergent.
  • Do not use abrasive cleaning agents or immerse the scale in water.
  • Ensure the scale is completely dry before storage or next use.

6.2. Storage

When not in use, store the scale in a dry place, away from direct sunlight and extreme temperatures. Do not place heavy objects on the scale when storing it.

7. Troubleshooting

ProblemPossible CauseSolution
Scale does not turn on.Batteries are dead or incorrectly installed.Check battery polarity. Replace batteries if necessary.
Inaccurate readings.Scale is on an uneven surface; scale needs re-calibration; scale is overloaded.Place scale on a hard, flat surface. Step off, wait for it to turn off, then step on again. Ensure weight is within 150 kg limit.
Display shows 'Lo'.Low battery indicator.Replace the batteries.
Display shows 'Err' or 'O-Ld'.Overload indicator.The maximum capacity of 150 kg has been exceeded. Step off the scale immediately.

8. Specifications

  • Model: GS 200 Allium
  • Brand: Beurer
  • Material: Safety Glass
  • Weight Limit: 150 kg (330 lb / 23.5 st)
  • Graduation: 100 g (0.2 lb / 0.01 st)
  • Display Type: LCD with 40 mm digit size
  • Special Feature: Backlit display
  • Power Source: 2 x 3V CR2032 Lithium Metal batteries (included)
  • Product Dimensions (L x W x H): Approximately 32.6 x 33 x 4.6 cm (12.8 x 13 x 1.8 inches)
  • Product Weight: Approximately 0.26 kg (260 grams)

9. Warranty and Support

Beurer products are manufactured to the highest quality standards. For information regarding warranty terms, conditions, and customer support, please refer to the warranty card included with your purchase or visit the official Beurer website. Keep your proof of purchase for any warranty claims.

For technical assistance or further inquiries, please contact Beurer customer service through their official channels.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.