1. Introduction
This manual provides comprehensive instructions for the proper installation, usage, and maintenance of the Zoll 8000-0814 Recessed AED Wall Cabinet. This cabinet is specifically designed to securely house a Zoll AED Plus device in a visible and accessible location, ensuring readiness for emergency situations.
2. Safety Information
Adhere to all safety guidelines during installation and use to prevent injury or damage to the product and surrounding environment.
- Professional Installation Recommended: For optimal safety and stability, installation by a qualified professional is recommended.
- Secure Mounting: Ensure the cabinet is securely mounted to a structurally sound wall. Failure to do so may result in the cabinet detaching, causing injury or damage.
- Weight Capacity: Do not exceed the cabinet's intended weight capacity. This cabinet is designed for a single AED Plus device.
- Clearance: Maintain adequate clearance around the cabinet door for unobstructed opening and access to the AED.
- Electrical Safety: If installing near electrical wiring, ensure all local electrical codes are followed.
3. Package Contents
Before beginning installation, verify that all components are present and undamaged.
- Zoll 8000-0814 Recessed AED Wall Cabinet
- Mounting Hardware (screws, anchors)
- Installation Template (if included)
- Instruction Manual
4. Setup and Installation
4.1 Site Selection
Choose a location that is easily visible, accessible, and free from environmental hazards such as excessive moisture or extreme temperatures. Ensure the wall structure can adequately support the cabinet's weight (17 pounds) and the AED device.
4.2 Mounting Instructions
Follow these steps for recessed mounting:
- Prepare the Wall Opening: Using the provided installation template (if applicable) or the cabinet's dimensions (approximately 14 x 14 x 6.9 inches for the recessed portion), mark the precise location for the wall opening. Carefully cut the opening in the wall, ensuring clean edges.
- Insert Cabinet: Gently slide the cabinet into the prepared wall opening. Ensure it sits flush with the wall surface.
- Secure Cabinet: Using the provided mounting hardware, secure the cabinet to the wall studs or appropriate anchors. Ensure all screws are tightened firmly to prevent any movement or instability.
- Verify Stability: After securing, gently test the cabinet's stability to confirm it is firmly attached to the wall.

Image showing the Zoll AED Wall Cabinet designed for recessed mounting. This metal cabinet provides a secure and visible housing for an AED Plus device, integrating smoothly into a wall structure.
5. Usage
The Zoll 8000-0814 Recessed AED Wall Cabinet is designed to store and protect your AED Plus device, making it readily available when needed.
- Placing the AED: Open the cabinet door and carefully place the Zoll AED Plus device inside. Ensure it fits securely and does not obstruct the door mechanism.
- Accessing the AED: In an emergency, open the cabinet door to retrieve the AED Plus device. The cabinet is designed for quick and easy access.
- Visibility: The cabinet's design ensures the AED is visible, aiding in rapid location during critical moments.
6. Maintenance
Regular maintenance ensures the cabinet remains in optimal condition and the AED is always accessible.
- Cleaning: Clean the cabinet exterior periodically with a soft, damp cloth. Avoid abrasive cleaners that could damage the finish.
- Inspection: Annually inspect the cabinet for any signs of damage, corrosion, or loose mounting hardware. Tighten any loose screws as necessary.
- Door Functionality: Ensure the cabinet door opens and closes smoothly and securely. Lubricate hinges if necessary.
7. Troubleshooting
This section addresses common issues that may arise with the AED wall cabinet.
- Cabinet Feels Loose: If the cabinet feels unstable, re-check all mounting screws and anchors. Ensure they are properly seated and tightened into a secure wall structure.
- Door Not Closing Properly: Inspect the hinges and the cabinet frame for any obstructions or damage. Ensure the cabinet is not warped and is installed flush with the wall.
- Difficulty Opening Door: Check for any debris or paint buildup around the door edges. Lubricate hinges if they are stiff.
8. Specifications
Detailed specifications for the Zoll 8000-0814 Recessed AED Wall Cabinet.
| Specification | Detail |
|---|---|
| Brand | Zoll |
| Model Number | 8000-0814 |
| ASIN | B00DQ8LX68 |
| UPC | 639302561980 |
| Manufacturer | ZOLL Medical Corp. |
| Package Dimensions | 14 x 14 x 6.9 inches |
| Item Weight | 17 pounds |
| Material | Metal |
| Color | Metal |
| Mounting Type | Wall Mount (Recessed) |
| Compatible Devices | AED Plus |
9. Warranty and Support
For specific warranty information regarding your Zoll 8000-0814 Recessed AED Wall Cabinet, please refer to the documentation provided at the time of purchase or contact Zoll Medical Corporation directly.
Customer Support: For technical assistance, replacement parts, or any inquiries not covered in this manual, please contact Zoll Medical Corporation customer support through their official website or the contact information provided with your product.
Note: Protection plans may be available from third-party providers. These are separate from the manufacturer's warranty.





