Introduction
This manual provides essential information for the safe and effective use of your Imation AC Adapter Power Supply, Model DV-51AR. This genuine Imation brand power supply is designed to convert standard AC wall power to 5VDC at 1A, suitable for compatible electronic devices. Please read this manual thoroughly before use and retain it for future reference.
Product Overview
Figure 1: Imation AC Adapter Power Supply, Model DV-51AR. This image shows the compact black power adapter with its attached DC output cable and barrel connector, resting on a carpeted surface. The product label with specifications is visible on the top surface of the adapter.
The Imation DV-51AR is a compact, plug-in Class 2 transformer. It features a standard two-prong AC input and a DC output cable terminated with a barrel connector, providing regulated 5VDC at 1 Amp. It is designed for indoor use only.
Setup
- Verify Compatibility: Before connecting, ensure your device requires a 5VDC power input and draws no more than 1 Amp (1000mA). Check your device's specifications or original power adapter for voltage and current requirements.
- Inspect the Adapter: Visually inspect the power adapter and its cable for any signs of damage, such as frayed wires, cracks, or bent pins on the connector. Do not use if damaged.
- Connect to Device: Carefully insert the barrel connector of the power adapter into the DC input port of your electronic device. Ensure a snug fit.
- Connect to Power Outlet: Plug the AC prongs of the power adapter into a standard 120VAC 60Hz wall outlet. Ensure the outlet is easily accessible.
- Power On Device: Once connected, power on your electronic device as per its own operating instructions.
Caution: This adapter is for indoor use only. Do not expose to moisture or extreme temperatures. Always ensure the power adapter's specifications match your device's requirements to prevent damage.
Operating Instructions
The Imation DV-51AR power supply operates automatically once connected to a compatible device and a live AC outlet. It provides a stable 5VDC output to power or charge your device.
- Ensure the adapter is plugged into a functional wall outlet.
- Confirm the adapter's output connector is securely inserted into your device's power input port.
- The adapter will supply power as long as it is connected to both the power source and the device.
- To disconnect, first unplug the adapter from the wall outlet, then disconnect it from your device.
Maintenance
The Imation DV-51AR power adapter requires minimal maintenance. Follow these guidelines to ensure longevity:
- Cleaning: Disconnect the adapter from all power sources and devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
- Handling: Do not drop the adapter or subject it to strong impacts. Avoid pulling the cable to unplug the adapter from the wall outlet or device; always grasp the plug or connector directly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to device. | Adapter not plugged in; faulty outlet; incorrect voltage/current; damaged adapter/cable. | Ensure adapter is fully plugged into a working outlet. Test outlet with another device. Verify device's power requirements match adapter's output. Inspect adapter and cable for damage; replace if necessary. |
| Device not charging/powering efficiently. | Loose connection; device drawing too much current; adapter overheating. | Ensure all connections are secure. Confirm device's current draw is within 1A. Disconnect adapter and allow it to cool if hot. Ensure proper ventilation. |
| Adapter feels hot during use. | Normal operation (some heat is expected); excessive load; poor ventilation. | A warm adapter is normal. If it's excessively hot, disconnect immediately. Ensure device's current draw is not exceeding 1A. Provide adequate airflow around the adapter. |
If troubleshooting steps do not resolve the issue, discontinue use and contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Imation |
| Model Number | DV-51AR |
| Type | Plug-in Class 2 Transformer |
| Input Voltage | 120VAC |
| Input Frequency | 60Hz |
| Input Power | 15W |
| Output Voltage | 5VDC |
| Output Current | 1A (1000mA) |
| Output Regulation | Regulated |
| Connector Type | Barrel Connector |
| Safety Certifications | UL Listed (E81356) |
| Operating Environment | Indoor Use Only |
| Country of Origin | Made in China |
Note: Specifications are subject to change without notice.
Warranty and Support
For information regarding warranty coverage and technical support for your Imation AC Adapter Power Supply, Model DV-51AR, please refer to the original product packaging or visit the official Imation website. Keep your proof of purchase for warranty claims.
For further assistance, you may contact Imation customer service through their official channels, typically found on their website or product documentation.
