Introduction
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Progress Lighting Drum Shade Collection Five-Light Chandelier. This fixture features a crisp white drum shade and an understated brushed nickel finish, designed for various indoor settings such as dining rooms, foyers, and kitchens. It accommodates five candelabra base bulbs (60W max – LED, CFL, halogen, or incandescent, sold separately) and is fully dimmable with compatible bulbs.
Key Features:
- Elegant design with a white textured linen drum shade and brushed nickel finish.
- Dimmable functionality when used with dimmable bulbs.
- Suitable for sloped ceilings.
- Includes 42 inches of chain for adjustable hanging heights.
- Designed for indoor use in new traditional, rustic, and transitional settings.
Safety Information
WARNING: Always turn off electricity at the main circuit breaker panel before beginning installation or performing any maintenance.
If any special control devices are used with this fixture, follow the instructions carefully to ensure full compliance with National Electrical Code (N.E.C.) requirements. For any questions, contact a qualified electrical contractor.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, and/or other reproductive harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this product.
Always handle the fixture with care. Avoid dropping or subjecting it to impact. Ensure all connections are secure before restoring power.
Package Contents
Verify that all components listed below are included in your package before beginning installation. If any parts are missing, please contact customer service.
| Part | Description | Quantity |
|---|---|---|
| A | Fixture | 1 |
| B | Shade | 1 |
| C | Candle Cover | 5 |
| D | Pipe | 1 |
| E | Body | 1 |
Image: Package Contents and Hardware List
Hardware Contents (not actual size):
- Hex nut (1/8IP): Qty: 2
- Wire connector: Qty: 3
- 1/8IP Mounting strap: Qty: 1
- Screw collar: Qty: 1
- Chain holder (1/8IP): Qty: 1
- Nipple (1/8IP): Qty: 1
- Chain (42"): Qty: 1
- Canopy: Qty: 1
- Chain loop (1/8IP): Qty: 1
Setup & Installation
Follow these steps for proper installation of your chandelier. It is recommended to have a qualified electrician perform the installation.
General Installation Guidelines:
- Preparation: Turn off power at the circuit breaker. Clear the work area.
- Mounting: Secure the mounting strap to the outlet box.
- Wiring: Connect the fixture wires to the house wires according to local electrical codes. Typically, black to black, white to white, and ground to ground.
- Assembly: Attach the chain and canopy, adjusting the chain length as needed for desired hanging height.
- Fixture Attachment: Secure the fixture body to the chain and canopy.
- Shade and Bulbs: Install the drum shade and insert the recommended candelabra base bulbs (max 60W each).
Image: Assembly and Installation Diagram
Chandelier Hanging Height Guidelines:
Proper hanging height is crucial for both aesthetics and functionality. Consider the room type and ceiling height.
- Dining Room Tables: The bottom of the chandelier should typically be 30-36 inches above the tabletop for an 8-foot ceiling. For higher ceilings, add 3 inches for every additional foot of ceiling height. The width of the chandelier should generally be 12 inches less than the table width.
- Foyers and Living Rooms: Maintain at least 7 feet of clearance from the floor to the bottom of the fixture in areas where people walk underneath. For ceilings higher than 11 feet, position the chandelier approximately two-thirds of the distance from the floor to the ceiling.
Image: Dining Room Chandelier Hanging Guidelines
Image: Kitchen Island Pendant Hanging Guidelines
Image: Stairwell Chandelier Hanging Guidelines
Helpful Videos:
Video: Progress Lighting Chandelier Overview. This video provides a general overview of Progress Lighting chandeliers, which may offer additional context for installation.
Video: Brushed Nickel Collective Video. This video showcases the brushed nickel finish, providing a visual reference for the product's aesthetic.
Video: Beautiful chandelier for over dining table. This video demonstrates the chandelier installed over a dining table, offering a real-world perspective.
Operating Instructions
Once installed, your chandelier is ready for use.
- Power On/Off: Operate the chandelier using your standard wall switch.
- Dimming: If you have installed dimmable bulbs and a compatible dimmer switch, you can adjust the light intensity to create your desired ambiance.
- Bulb Type: This fixture uses five candelabra base bulbs (E12 base phenolic sockets), with a maximum wattage of 60W per bulb. LED, CFL, halogen, or incandescent bulbs can be used.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your chandelier.
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or shade material.
- Bulb Replacement: Always turn off power before replacing bulbs. Allow bulbs to cool completely before touching. Replace with bulbs of the same type and wattage (max 60W candelabra base).
- Shade Care: The white textured linen shade can be gently dusted or spot cleaned with a damp cloth if necessary. Avoid excessive moisture.
Troubleshooting
If your chandelier is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture; Loose wiring; Faulty bulb | Check circuit breaker; Verify wire connections; Replace bulb(s) |
| Lights flicker | Loose bulb; Incompatible dimmer switch; Loose wiring | Tighten bulbs; Ensure dimmer is compatible with bulbs; Check wire connections |
| Dimming not working | Non-dimmable bulbs; Incompatible dimmer switch | Install dimmable bulbs; Replace dimmer switch with a compatible one |
If the issue persists after attempting these solutions, please contact customer service or a qualified electrician.
Specifications
Detailed technical specifications for the Progress Lighting Drum Shade Collection Five-Light Chandelier.
| Attribute | Detail |
|---|---|
| Brand | Progress Lighting |
| Model Number | P4217-09 |
| Color | Brushed Nickel |
| Material | Alloy Steel, Linen |
| Style | Transitional |
| Light Fixture Form | Chandelier |
| Room Type | Bedroom, Dining Room, Entryway, Kitchen, Lobby |
| Indoor/Outdoor Usage | Indoor |
| Power Source | AC |
| Dimmable | Yes |
| Light Source | Incandescent (compatible with LED, CFL, Halogen) |
| Number of Light Sources | 5 |
| Voltage | 120 Volts |
| Wattage | 60 watts (max per bulb) |
| Bulb Base | Candelabra (E12) |
| Mounting Type | Ceiling Mount (Semi Flush Mount) |
| Item Dimensions (L x W x H) | 21.63"L x 21.63"W x 21.13"H |
| Item Weight | 8 Pounds |
| UPC | 785247178971 |
Warranty & Support
Your Progress Lighting Drum Shade Collection Five-Light Chandelier is covered by a 1-Year Limited Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use.
For missing parts, technical assistance, or warranty claims, please contact Progress Lighting Customer Service:
- Phone: 1-800-447-0573
- Hours: Monday - Friday, 8:00 AM - 8:00 PM (Eastern Time)
- Email: customerservice@progresslighting.com