Introduction
Thank you for choosing the GEORGE KOVACS P4336-647 George's Reading Room LED Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions thoroughly before installation and operation, and retain them for future reference.
This LED table lamp features a durable construction of steel, aluminum, and brass with a Copper Bronze Patina finish, and includes an integrated dimmable LED module. Its design is suitable for indoor use, providing adjustable lighting for various settings.
Important Safety Instructions
- Read all instructions carefully before assembling or operating this lamp.
- Ensure the power supply is disconnected before installation, cleaning, or maintenance.
- This product is intended for indoor use only. Do not expose to water or moisture.
- Do not attempt to modify the lamp or its electrical components. Any modifications may void the warranty and pose a safety risk.
- Keep the lamp away from flammable materials.
- The LED module is integrated and not user-replaceable. Do not attempt to open the LED housing.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Use only with 120V, 60Hz power supply.
Package Contents
Carefully unpack your lamp and ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- GEORGE KOVACS P4336-647 LED Table Lamp (with integrated LED module)
- Instruction Manual
Image: The GEORGE KOVACS P4336-647 LED Table Lamp, showcasing its Copper Bronze Patina finish and adjustable head.
Setup and Installation
The GEORGE KOVACS P4336-647 is designed for tabletop placement and typically requires minimal assembly. Follow these steps for proper setup:
- Unpack: Carefully remove all components from the packaging. Retain packaging materials for future transport or returns.
- Placement: Choose a stable, flat surface for the lamp. Ensure the location is dry and away from direct heat sources or moisture.
- Connect Power: Plug the lamp's power cord into a standard 120V AC wall outlet.
- Adjust Position: The lamp head and arm are adjustable. Gently position the lamp head to direct light as desired. Avoid excessive force when adjusting.
Note: This lamp is primarily designed as a tabletop unit. While mounting hardware may be included, it is generally for securing the base if desired, not for wall or ceiling installation.
Operation
The GEORGE KOVACS P4336-647 LED Table Lamp features a simple toggle switch for power and dimming functionality.
- Power On/Off: Locate the toggle switch on the lamp base. Press the switch once to turn the lamp on. Press it again to turn the lamp off.
- Dimming: This lamp is dimmable. To adjust the brightness, press and hold the toggle switch. The light will cycle through its dimming range. Release the switch when the desired brightness level is achieved. The lamp will retain the last dimming setting when turned off and on again.
- Adjusting Light Direction: The lamp head can be pivoted to direct the light beam. Gently move the lamp head to your preferred angle.
Care and Maintenance
Proper care will ensure the longevity and appearance of your GEORGE KOVACS LED Table Lamp.
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe down the lamp's surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- LED Module: The LED module is integrated and designed for long-term use. It is not user-serviceable or replaceable.
- Inspection: Periodically check the power cord for any signs of damage. If damage is found, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Lamp light is flickering or dimming unexpectedly. |
|
|
| Dimming function is not working. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | P4336-647 |
| Brand | GEORGE KOVACS |
| Dimensions (H x W x D) | 19.5 inches H x 5 inches W x 7 inches D |
| Weight | 7 pounds |
| Material | Alloy Steel, Aluminum, Brass |
| Finish Type | Copper Bronze Patina |
| Light Source | Integrated LED Module |
| Wattage | 8 Watts (Total) |
| Lumens | 442 Lumens |
| Color Temperature | 3000K |
| Color Rendering Index (CRI) | 84 CRI |
| Dimmable | Yes |
| Switch Type | Toggle |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Indoor |
| Certification | ETL Certified |
Warranty and Customer Support
Warranty: This GEORGE KOVACS product is covered by a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, modifications, or improper installation.
Customer Support: For technical assistance, warranty claims, or to report missing/damaged parts, please contact GEORGE KOVACS customer service. Please have your model number (P4336-647) and proof of purchase available when contacting support.
For more information, you may visit the GEORGE KOVACS Store on Amazon.
