Whirlpool 8009
Whirlpool 8009 Light Bulb User Manual
Model: 8009, 40-watt Incandescent Bulb
1. Product Overview
The Whirlpool 8009 Light Bulb is a genuine replacement part designed for various Whirlpool appliances. This 40-watt incandescent bulb provides reliable illumination and is engineered to meet the specific requirements of compatible models. It features an A15 bulb shape with a standard E26 medium base, operating at 120 volts.
Image 1.1: The Whirlpool 8009 Light Bulb, a 40-watt incandescent bulb with a standard screw-in base.
2. Safety Information
Always prioritize safety when handling electrical components. Read and understand all instructions before installation or maintenance.
- Disconnect Power: Before attempting to install or replace the bulb, ensure the appliance's power supply is completely disconnected at the circuit breaker or by unplugging the appliance.
- Allow Cooling: If replacing an old bulb, allow it to cool completely before touching it to prevent burns.
- Handle with Care: Incandescent bulbs can be fragile. Handle the bulb by its base to avoid damaging the glass or filament.
- Correct Wattage: Use only bulbs with the specified wattage (40 watts) to prevent damage to the appliance or fire hazards.
- Disposal: Dispose of old bulbs according to local regulations.
3. Installation Instructions
Follow these steps to properly install the Whirlpool 8009 Light Bulb:
- Prepare the Appliance: Ensure the appliance is turned off and disconnected from its power source.
- Locate Bulb Socket: Identify the light bulb socket within your Whirlpool appliance (e.g., oven, refrigerator).
- Remove Old Bulb (if applicable): Carefully unscrew the old bulb counter-clockwise until it is free from the socket. If the bulb is broken, use appropriate tools and protective gear to remove it safely.
- Insert New Bulb: Gently screw the new Whirlpool 8009 Light Bulb into the socket clockwise until it is snug. Do not overtighten, as this can damage the bulb or socket.
- Restore Power: Reconnect the appliance to its power source.
- Test: Turn on the appliance and verify that the new bulb illuminates correctly.
4. Operating Instructions
The Whirlpool 8009 Light Bulb operates automatically when power is supplied to its socket within the appliance. No special operating procedures are required for the bulb itself beyond ensuring it is correctly installed and the appliance's light function is activated.
- For ovens, the light typically activates when the oven door is opened or a dedicated light switch is pressed.
- For refrigerators, the light activates when the refrigerator door is opened.
5. Maintenance
The Whirlpool 8009 Light Bulb requires minimal maintenance. Periodically, you may wish to:
- Cleaning: If the bulb becomes dusty or dirty, ensure the appliance is unplugged and the bulb is cool. Gently wipe the glass with a soft, dry cloth. Do not use liquid cleaners directly on the bulb.
- Replacement: Replace the bulb when it burns out. The lifespan of an incandescent bulb can vary based on usage and environmental factors.
6. Troubleshooting
If the Whirlpool 8009 Light Bulb does not illuminate after installation, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the appliance. | Check if the appliance is plugged in and the circuit breaker has not tripped. |
| Bulb does not light up. | Bulb not screwed in properly. | Disconnect power, then carefully tighten the bulb in the socket. Do not overtighten. |
| Bulb does not light up. | Defective bulb. | Try a new, known-good bulb to confirm if the issue is with the bulb or the appliance's socket/wiring. |
| Bulb burns out quickly. | Voltage fluctuations or excessive vibration. | Ensure the appliance is on a stable power supply. If the issue persists, consult a qualified technician. |
7. Specifications
Detailed specifications for the Whirlpool 8009 Light Bulb:
- Model Number: 8009
- Brand: Whirlpool
- Light Type: Incandescent
- Wattage: 40 watts
- Incandescent Equivalent Wattage: 40 Watts
- Voltage: 120 Volts
- Bulb Shape Size: A15
- Base Type: E26 Medium (standard screw-in)
- Material: Copper (base)
- Color: Clear (Y Color:clear)
- White Brightness: 415 Lumens
- Item Weight: 0.8 ounces (approx. 22.68 g)
- Product Dimensions: 1.5 x 2.5 x 3.5 inches
- Special Feature: Recirculating (Note: This feature typically refers to appliance functionality, not the bulb itself, but is listed in product specifications.)
8. Warranty and Support
As a genuine replacement part, the Whirlpool 8009 Light Bulb is manufactured to Whirlpool's quality standards. For specific warranty information regarding replacement parts, please refer to your appliance's original warranty documentation or contact Whirlpool customer support directly.
For further assistance or to inquire about other genuine Whirlpool replacement parts, please visit the official Whirlpool website or contact their customer service department.
- Whirlpool Official Website: www.whirlpool.com
- Whirlpool Customer Support: Refer to your appliance manual or the Whirlpool website for contact details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.