1. Product Overview
The K-Rain 7001-SL Pro 100 Electric Valve is designed for irrigation systems, suitable for both commercial and residential applications. This valve features a piston-driven diaphragm and is engineered for reliable performance in various water conditions.
Image 1.1: K-Rain 7001-SL Pro 100 Electric Valve. This image displays the black plastic electric valve with its solenoid and manual flow control knob.
2. Key Features
- Piston-Driven Diaphragm: Ensures consistent and reliable valve operation.
- Versatile Water Compatibility: Can be used effectively with both potable (clean) and dirty water applications.
- Pipe Compatibility: Designed to fit 1-inch or 1-1/4-inch pipes, offering installation flexibility.
- Flow Control: Allows for manual adjustment of water flow through the valve.
- Internal/External Bleed: Provides options for manual operation and system flushing.
3. Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your K-Rain 7001-SL valve. It is recommended that installation be performed by a qualified professional.
3.1 Connection Types
- Inlet Connection: 1-inch Slip connection. Ensure proper sealing for a watertight fit.
- Outlet Connection: 1-inch NPT (National Pipe Taper) connection.
3.2 Installation Steps (General Guidelines)
- Turn off the main water supply to the irrigation system.
- Identify the correct location for the valve, ensuring it is accessible for maintenance.
- Connect the inlet side of the valve to the supply line using appropriate slip fittings and PVC cement for a secure, leak-free connection.
- Connect the outlet side of the valve to the irrigation zone piping using NPT threaded connections and thread sealant tape.
- Wire the solenoid to your irrigation controller according to the controller's instructions. Ensure all electrical connections are waterproof and secure.
- Slowly turn on the main water supply and check for leaks.
4. Operation
The K-Rain 7001-SL valve operates electrically via a solenoid connected to an irrigation controller. It also features manual control options.
4.1 Automatic Operation
When connected to an irrigation controller, the valve will open and close automatically based on the programmed schedule. Ensure the solenoid is properly wired and the controller is functioning correctly.
4.2 Manual Flow Control
The valve is equipped with a flow control knob. Turning this knob allows you to manually adjust the amount of water flowing through the valve. Turn clockwise to decrease flow and counter-clockwise to increase flow. Do not overtighten.
4.3 Manual Bleed Operation
The internal/external bleed feature allows for manual opening of the valve for testing or flushing the system. Consult your irrigation system's specific requirements for proper use of this feature.
5. Maintenance
Regular maintenance helps ensure the longevity and efficient operation of your valve.
- Periodic Inspection: Periodically inspect the valve for any signs of leaks, cracks, or damage.
- Cleaning: If the valve is used in dirty water applications, sediment buildup may occur. Periodically flush the system using the manual bleed feature. If necessary, the valve can be disassembled for cleaning, but this should only be done by experienced individuals.
- Winterization: In cold climates, ensure the irrigation system, including the valve, is properly winterized to prevent freezing and damage.
6. Troubleshooting
If you encounter issues with your K-Rain 7001-SL valve, consider the following common troubleshooting steps:
- Valve Not Opening: Check the electrical connections to the solenoid and ensure the irrigation controller is sending a signal. Verify that the main water supply is on.
- Valve Not Closing: Inspect the valve for debris that might be preventing it from fully closing. Check the solenoid for proper function.
- Leaks: Check all pipe connections for proper sealing. Ensure the valve body is not cracked or damaged.
- Low Flow: Verify that the manual flow control knob is fully open. Check for obstructions in the pipeline or within the valve.
For persistent issues, consult a professional irrigation technician.
7. Specifications
| Specification | Detail |
|---|---|
| Brand | K-Rain |
| Model Number | 7001-SL |
| Material | Plastic |
| Item Dimensions (L x W x H) | 5.5 x 3.25 x 4 inches |
| Item Weight | 14.9 ounces |
| Inlet Connection Size | 1 Inch |
| Inlet Connection Type | Slip |
| Outlet Connection Size | 1 Inch |
| Outlet Connection Type | NPT |
| Number of Ports | 1 |
| Specification Met | ASTM, NSF, UPC |
| UPC | 671923102531 |
8. Warranty and Support
Specific warranty information for the K-Rain 7001-SL Pro 100 Electric Valve is not provided within this manual. Please refer to the official K-Rain website or contact K-Rain customer support for detailed warranty terms and conditions.
For additional product information or support, you may visit the K-Rain Store on Amazon or the manufacturer's official website.
