Delta 126647 Alexandria Tissue Paper Holder Instruction Manual

1. Introduction and Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your Delta 126647 Alexandria Tissue Paper Holder. Designed for bathroom organization, this accessory features a polished chrome and white finish, offering both functionality and a modern aesthetic. Please read these instructions carefully before proceeding with installation or use.

2. Product Components

The Delta 126647 Alexandria Tissue Paper Holder includes the main holder unit and necessary mounting hardware. The unit consists of a wall-mounted base, a curved arm for holding the tissue roll, and decorative elements with a polished chrome and white finish.

Figure 1: The Delta 126647 Alexandria Tissue Paper Holder. This image displays the complete unit, featuring a polished chrome wall mount, a curved chrome arm for the tissue roll, and a decorative white ceramic accent on the right side of the mounting post.

3. Setup and Installation

Installation of the Delta 126647 Alexandria Tissue Paper Holder is designed to be straightforward. Mounting hardware is included with your purchase.

Required Tools (Not Included):

• Pencil
• Measuring Tape
• Drill
• Drill Bits (appropriate for wall material and anchor size)
• Screwdriver (Phillips or Flathead, depending on screw type)
• Level

Installation Steps:

1. Select Location: Choose a suitable location on your bathroom wall, ensuring it is at a convenient height and distance from the toilet. Use a level to mark the desired mounting points.
2. Prepare Wall: Drill pilot holes at the marked locations. If installing into drywall, insert appropriate wall anchors (included).
3. Attach Mounting Bracket: Secure the mounting bracket to the wall using the provided screws. Ensure it is firmly attached and level.
4. Mount Holder: Align the tissue paper holder with the mounting bracket. Secure the holder to the bracket using the set screw, typically located on the underside of the holder's base. Tighten the set screw until the holder is stable.
5. Verify Stability: Gently pull on the installed holder to ensure it is securely fastened to the wall.

Note: For specific wall types (e.g., tile, plaster), consult a professional or refer to specialized drilling techniques.

4. Operating Instructions

Using your Delta 126647 Alexandria Tissue Paper Holder is simple.

Loading a Tissue Roll:

1. Grasp the tissue roll.
2. Slide the tissue roll onto the curved arm of the holder.
3. Ensure the roll is seated properly and can rotate freely.

Replacing a Tissue Roll:

1. Remove the empty cardboard core from the holder's arm.
2. Dispose of the empty core responsibly.
3. Follow the "Loading a Tissue Roll" steps with a new roll.

5. Maintenance

To maintain the polished chrome and white finish of your tissue paper holder, follow these cleaning guidelines:

• Clean regularly with a soft, damp cloth.
• For stubborn spots, use a mild soap solution and rinse thoroughly.
• Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Dry the holder immediately after cleaning to prevent water spots.

6. Troubleshooting

7. Specifications

8. Warranty and Support

The Delta 126647 Alexandria Tissue Paper Holder comes with a Limited Lifetime Warranty. For detailed information regarding warranty coverage, claims, or technical support, please contact Delta Faucet customer service directly. Contact information can typically be found on the manufacturer's official website or product packaging.

Manufacturer: Delta Faucet