Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and care of your Breville Blend Active VBL062 Personal Blender. Please read all instructions carefully before first use and retain this manual for future reference.
Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed, including:
- Read all instructions before operating the appliance.
- To protect against electrical shock, do not immerse the motor base, cord, or plug in water or other liquids.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always operate the blender with the lid in place.
- Blades are sharp. Handle with care.
Components
Your Breville Blend Active VBL062 Personal Blender includes the following parts:
- Motor Base (300W)
- Blade Assembly
- 2 x 600ml BPA-free Blending Bottles
- 2 x Leak-proof Lids
Setup and First Use
- Unpack: Carefully remove all components from the packaging.
- Clean: Wash the blending bottles, lids, and blade assembly in warm, soapy water. Rinse thoroughly and dry. The motor base should only be wiped with a damp cloth.
- Placement: Place the motor base on a clean, dry, and stable surface. Ensure the power cord is not obstructing any pathways.
Operating Instructions
Follow these steps to blend your ingredients:
- Add Ingredients: Fill the blending bottle with your desired ingredients. For best results, add liquids first, then soft fruits, leafy greens, and finally ice or frozen ingredients. Do not exceed the MAX fill line on the bottle.
- Attach Blade Assembly: Screw the blade assembly firmly onto the open end of the blending bottle until it is securely tightened.
- Place on Motor Base: Invert the blending bottle so the blade assembly is facing down. Align the tabs on the bottle with the slots on the motor base. Press down and twist clockwise to lock the bottle into place.
- Blend: Plug the blender into a power outlet. Press and hold the 'BLEND' button on the front of the motor base to activate the blending action. Blend until desired consistency is achieved. Release the button to stop blending.
- Remove Bottle: Twist the bottle counter-clockwise to unlock it from the motor base, then lift it off.
- Enjoy: Unscrew the blade assembly and replace it with a leak-proof lid. Your drink is now ready to enjoy or take on the go.
Maintenance and Cleaning
Proper cleaning ensures the longevity and hygiene of your blender.
Cleaning the Blending Bottles and Lids:
- The blending bottles and lids are dishwasher safe (top rack only).
- Alternatively, wash them in warm, soapy water using a bottle brush for thorough cleaning. Rinse well.
Cleaning the Blade Assembly:
- Caution: Blades are sharp. Handle with extreme care.
- Rinse the blade assembly immediately after use to prevent food from drying on the blades.
- Wash with warm, soapy water. A small brush can be used to clean around the blades.
- The blade assembly is not recommended for dishwasher cleaning to preserve blade sharpness.
Cleaning the Motor Base:
- Always unplug the motor base before cleaning.
- Wipe the motor base with a damp cloth. Do not immerse the motor base in water or any other liquid.
- Do not use abrasive cleaners or scouring pads, as they may scratch the surface.
Storage:
Store the blender in a dry place. The cord can be wrapped around the base for tidy storage.
Troubleshooting
If you encounter issues with your blender, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not start. | Not plugged in; bottle not correctly assembled or locked. | Ensure plug is in outlet; check bottle is locked onto motor base. |
| Ingredients not blending smoothly. | Too little liquid; too many ingredients; ingredients too large. | Add more liquid; reduce ingredient quantity; cut ingredients into smaller pieces. |
| Leakage from bottle. | Blade assembly not tightened; bottle overfilled. | Ensure blade assembly is tightly screwed on; do not fill past MAX line. |
| Motor smells or overheats. | Overloading; continuous operation for too long. | Reduce load; allow motor to cool down for 15-20 minutes before resuming use. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | VBL062 |
| Power | 300 Watts |
| Voltage | 230 Volts |
| Material | Plastic (BPA-free bottles) |
| Color | Green, White |
| Dimensions (L x W x H) | 13.5 x 13 x 40.5 cm |
| Weight | 1.4 Kilograms |
| Number of Speeds | 1 |
| Special Features | Removable blade, Portable, Cord storage |
Warranty and Support
Breville products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship under normal household use. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period.
For technical support, spare parts, or warranty claims, please contact Breville customer service through their official website or the contact details provided in your product packaging. When contacting support, please have your model number (VBL062) and proof of purchase ready.
