1. Introduction
This manual provides instructions for the assembly, operation, and maintenance of your Hercules BS200B Symphony Music Stand. Designed for musicians, this stand features a robust construction and user-friendly adjustments to enhance your practice and performance experience.
2. Safety Information
- Ensure all components are securely fastened before use to prevent instability.
- Do not exceed the maximum load capacity of 5 kg (11 lbs) to avoid damage or injury.
- Keep hands clear of moving parts during height adjustments.
- Place the stand on a stable, level surface.
3. Package Contents
Please verify that all the following components are included in your package:
- Music Desk (Sheet Music Holder)
- Main Stand Shaft with EZ Grip
- Tripod Base Assembly
- Assembly Tools (if applicable, typically an Allen wrench)
4. Setup and Assembly
Follow these steps to assemble your Hercules BS200B Symphony Music Stand:
- Unpack Components: Carefully remove all parts from the packaging.
- Attach Tripod Base: Extend the legs of the tripod base. Ensure they are fully spread for maximum stability.
- Insert Main Shaft: Insert the main stand shaft into the top of the tripod base. Secure it using the provided knob or screw mechanism.
- Attach Music Desk: Place the music desk onto the top of the main stand shaft. Tighten any securing screws or knobs to ensure the desk is firmly attached and does not wobble.

Figure 1: Fully assembled Hercules BS200B Symphony Music Stand, showcasing its stable tripod base and wide music desk.
5. Operating Instructions
The Hercules BS200B features an EZ Height Adjustment Grip for convenient operation.
- Height Adjustment: To adjust the stand's height, locate the EZ Grip mechanism on the main shaft. Press the grip to release the locking mechanism, then smoothly raise or lower the shaft to your desired height. Release the grip to lock the stand in place. The stand can be adjusted from 690 mm (27.2") to 1100 mm (43.3").
- Music Desk Angle: Adjust the angle of the music desk by loosening the tilt knob (if present), setting the desired angle, and then tightening the knob to secure it.
- Stability: The dual front leg design provides enhanced stability. Ensure the legs are fully extended and the stand is on a flat surface for optimal balance.

Figure 2: A hand demonstrating the use of the EZ Height Adjustment Grip for quick and easy height changes.
6. Maintenance
- Cleaning: Wipe down the stand with a soft, dry cloth to remove dust and fingerprints. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners.
- Lubrication: Periodically check the moving parts, such as the height adjustment mechanism, for smooth operation. If necessary, apply a small amount of silicone-based lubricant to ensure ease of movement.
- Storage: When not in use, the stand can be partially disassembled or folded (if applicable) for compact storage. The unique stackable space-saving leg design allows for efficient storage.
7. Troubleshooting
- Problem: Stand is unstable or wobbles.
- Solution: Ensure the tripod legs are fully extended and locked into position. Verify the stand is placed on a flat, level surface. Check all assembly screws and knobs for tightness.
- Problem: Music desk slides down or does not hold position.
- Solution: Ensure the EZ Height Adjustment Grip is fully released after setting the height. If the issue persists, check for any obstructions in the shaft or wear on the internal locking mechanism. Do not exceed the stated load capacity.
- Problem: Difficulty adjusting height.
- Solution: Ensure the EZ Grip is fully pressed during adjustment. Clean the inner and outer shafts to remove any dirt or debris. A small amount of lubricant may be applied if movement is stiff.
8. Specifications
| Model Number | BS200B |
| Height Range | 690 mm - 1100 mm (27.2" - 43.3") |
| Load Capacity | 5 kg (11 lbs) |
| Item Weight | 7.5 pounds |
| Product Dimensions | 19.37 x 22.83 x 4.8 inches (approximate, packaged) |
| Material Type | Metal |
| Color | Black |
9. Warranty and Support
For warranty information or technical support, please refer to the official Hercules website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.
Manufacturer Website: www.herculesstands.com






