Important Safety Information
Read all instructions before using this product. Failure to follow these instructions can result in product damage, property damage, or serious injury.
- This charger is designed exclusively for 1S Li-Po batteries with an E-flite ultra micro connector. Do not attempt to charge other battery types.
- Never leave the charger unattended while in use.
- Do not charge batteries near flammable materials or liquids.
- Ensure proper ventilation during charging.
- Do not short-circuit the charger output or battery terminals.
- Keep out of reach of children.
- Disconnect the charger from the power source and battery when not in use.
Product Overview
The E-flite EFLC1008 is a compact and convenient 1S USB Li-Po charger designed for use with E-flite ultra micro connector batteries. It allows for charging anywhere a powered USB port is available, providing a reliable 300mA charging current.
Image: The E-flite EFLC1008 1S USB Li-Po Charger, a compact black device with a USB connector on one end and a battery connector on the other.
Specifications
| Feature | Specification |
|---|---|
| Brand | E-flite |
| Model Number | EFLC1008 |
| Input Voltage | 5.0V DC (USB) |
| Input Current | 350mA |
| Output Voltage | 4.2V DC |
| Output Current | 300mA |
| Connector Type | USB (Input), E-flite Ultra Micro (Output) |
| Number of Ports | 1 |
Setup
Follow these steps to prepare your charger for use:
- Identify Components: Ensure you have the E-flite EFLC1008 USB Li-Po Charger and a compatible 1S Li-Po battery with an E-flite ultra micro connector.
- Power Source: Locate a powered USB port (e.g., computer, USB wall adapter, portable power bank).
- Connect Charger: Plug the USB end of the EFLC1008 charger into the powered USB port. The charger's LED indicator should illuminate, typically red, indicating it is ready.
Operating Instructions
To charge your 1S Li-Po battery:
- Connect Battery: Carefully connect your 1S Li-Po battery to the charger's ultra micro connector. Ensure the polarity is correct.
- Charging Indication: The LED on the charger will indicate the charging status. Typically, a solid red light indicates charging is in progress.
- Charging Completion: When the battery is fully charged, the LED indicator will change, usually turning off or changing to a solid green light. Refer to the specific LED behavior for your charger model if different.
- Disconnect: Once charging is complete, disconnect the battery from the charger, then disconnect the charger from the USB power source.
Maintenance
Proper maintenance ensures the longevity and safe operation of your charger:
- Cleaning: Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquids or solvents.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the charger and its connectors for any signs of damage, such as frayed wires or bent pins. Do not use a damaged charger.
Troubleshooting
If you encounter issues with your E-flite EFLC1008 charger, refer to the table below:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED not lighting up when plugged into USB. | No power from USB port; faulty USB cable/port; charger malfunction. | Try a different USB port or power source. Check USB cable for damage. If issue persists, charger may be faulty. |
| Battery not charging (LED remains off or indicates error). | Battery not properly connected; battery is not 1S Li-Po; battery is severely discharged or damaged. | Ensure battery is securely connected. Verify battery type is 1S Li-Po. Attempt to charge a known good battery. If battery is damaged, discontinue use. |
| Charging takes too long. | Low power output from USB port; high capacity battery. | Ensure USB port provides sufficient power (e.g., not a low-power hub). Charging time is proportional to battery capacity. |
Warranty Information
E-flite products are manufactured to high standards. For specific warranty details, including coverage period and terms, please refer to the documentation included with your purchase or visit the official E-flite website. Keep your proof of purchase for any warranty claims.
Customer Support
For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact E-flite customer support. Contact information can typically be found on the official E-flite website or in the product packaging.
Online resources and FAQs may also be available on the manufacturer's website.
