OttLite 717WG3 13-watt Refresh Task Lamp User Manual

Introduction

Thank you for choosing the OttLite 717WG3 13-watt Refresh Task Lamp. This manual provides essential information for the safe and efficient use of your new task lamp. Please read these instructions thoroughly before operating the product and retain them for future reference.

Product Overview

Key Features

• OttLite Illumination: Designed to provide a precise balance of contrast and brightness, reducing glare and eye strain for enhanced visual clarity.
• Compact Folding Design: Features a unique fold-up design for easy storage and portability.
• Automatic On/Off: The lamp automatically powers on when the shade is opened and turns off when folded down.
• Multi-Position Shade: The shade can be adjusted to direct light precisely where needed.
• Integrated Handle: Includes a convenient handle for easy transport.
• Energy-Efficient Bulb: Comes with a 13-watt OttLite tube, providing long-lasting illumination.

Components

Familiarize yourself with the main components of your OttLite Refresh Task Lamp:

• Lamp Base
• Folding Arm/Shade Assembly
• 13-watt OttLite Tube (pre-installed)
• Power Cord
• Integrated Carry Handle

Image 1: The OttLite 717WG3 Refresh Task Lamp in its compact, folded state, showcasing the integrated handle and sleek design.

Image 2: Side view of the OttLite 717WG3 Refresh Task Lamp illustrating its adjustable height and base dimensions. A sticker indicates "OttLite Bulb Included" and "OttLite Illumination".

Setup

1. Unpack the Lamp: Carefully remove all packaging materials from the lamp.
2. Position the Lamp: Place the lamp on a stable, flat surface. Ensure there is adequate space around the lamp for the shade to open and adjust freely.
3. Connect Power: Insert the power cord plug into a standard electrical outlet.
4. Initial Bulb Check: The 13-watt OttLite tube is typically pre-installed. If it is not, or if you are replacing it, refer to the "Bulb Replacement" section under Maintenance.

Operating Instructions

1. Turning On: To turn on the lamp, gently lift the folding arm/shade assembly upwards until it is fully open. The lamp will automatically illuminate.
2. Adjusting the Light: The shade can be pivoted to direct the light beam. Adjust the angle of the shade to suit your task and minimize glare.
3. Turning Off: To turn off the lamp, gently fold the arm/shade assembly downwards until it is fully closed. The lamp will automatically switch off.

Maintenance

Cleaning

• Always unplug the lamp before cleaning.
• Use a soft, dry cloth to wipe the exterior surfaces of the lamp.
• Do not use abrasive cleaners, solvents, or polishes, as these may damage the finish.

Bulb Replacement

The OttLite 717WG3 uses a 13-watt OttLite T1333E Electronic Ballast Replacement Tube. Ensure you use the correct replacement bulb to prevent damage to the lamp.

1. Unplug the Lamp: Disconnect the lamp from the power outlet and allow the bulb to cool completely if it has been in use.
2. Access the Bulb: The top cover of this model does not slide off. Reach under the shade assembly to access the bulb.
3. Remove Old Bulb: Grasp the bulb firmly and pull it slightly down and straight out from its socket.
4. Install New Bulb: Align the pins of the new OttLite T1333E 13-watt bulb with the socket. Gently push the bulb straight into the socket until it is securely seated. Do not force the bulb.
5. Test the Lamp: Plug the lamp back into the power outlet and open the shade to confirm the new bulb is working.

Troubleshooting

Specifications

• Model: OttLite 717WG3 Refresh Task Lamp
• Power Source: Corded Electric
• Wattage: 13 watts
• Bulb Type: OttLite T1333E 13-watt Electronic Ballast Replacement Tube
• Dimensions (Folded): Approximately 4.56"D x 5.75"W x 12.06"H (11.58 cm D x 14.61 cm W x 30.63 cm H)
• Adjustable Height: From 11.25 inches (28.6 cm) to 17.5 inches (44.5 cm)
• Base Size: 3.75 inches x 4.5 inches (9.5 cm x 11.4 cm)
• Item Weight: 1.5 Pounds (0.68 kg)
• Material: Metal
• Color: White
• UPC: 761712007700

Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official OttLite website. If you require technical assistance or have questions not covered in this manual, please contact OttLite customer support directly.

Contact information for support is typically available on the manufacturer's website or product packaging.