Introduction
This instruction manual provides detailed guidance for the safe assembly, proper operation, and routine maintenance of your DaVinci Ashbury 4-in-1 Convertible Crib, Model M8201RW. This versatile crib is designed to adapt to your child's growth, converting from an infant crib to a toddler bed, daybed, and ultimately a full-size bed (conversion kits sold separately).
The DaVinci Ashbury crib is crafted from sustainable New Zealand pinewood and TSCA compliant engineered wood, featuring a non-toxic, multi-step painting process that is lead and phthalate safe. It is also GREENGUARD Gold Certified, ensuring low chemical emissions for a healthier indoor environment.
Please read all instructions thoroughly before beginning assembly and retain this manual for future reference. For any questions or assistance, refer to the Support section.
Important Safety Warnings
- READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE. Keep this manual for future reference.
- DO NOT use this crib if any parts are missing, damaged, or broken. Contact the manufacturer for replacement parts and instructional literature if needed. DO NOT substitute parts.
- ENSURE ALL HARDWARE IS TIGHTENED SECURELY. Periodically check all fasteners for tightness.
- DO NOT use a mattress thicker than 6 inches (15 cm) or a mattress that, when compressed, does not leave at least 9 inches (23 cm) from the top of the crib side to the top of the mattress.
- NEVER use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
- NEVER place the crib near a window where cords from blinds or drapes could strangle a child.
- NEVER attach strings or straps to the crib or hang items over the crib that could pose a strangulation hazard.
- DO NOT use this crib for a child who can climb out or who is taller than 35 inches (89 cm).
- ALWAYS provide the supervision necessary for the continued safety of your child.
Setup and Assembly
Assembly of the DaVinci Ashbury 4-in-1 Convertible Crib is required. For optimal safety and ease, it is highly recommended that two adults perform the assembly. Carefully unpack all components and verify that all parts are present before beginning. Refer to the included hardware pack and assembly diagrams for specific instructions.
Image: The DaVinci Ashbury 4-in-1 Convertible Crib in its standard infant crib configuration, showcasing its elegant white finish and curved headboard design. A GREENGUARD Gold Certified label is visible in the top right corner.
Image: The DaVinci Ashbury Crib in its infant configuration, dressed with bedding, providing a view of the crib ready for use.
Components and Tools Required:
- Crib components (headboard, footboard, side rails, mattress support).
- Hardware pack (bolts, nuts, washers, Allen wrench).
- Phillips head screwdriver (not included).
- A second person for assistance.
Assembly Steps (General Overview):
- Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure.
- Install the mattress support at the desired height. Refer to the "Operating Instructions" section for mattress height adjustments.
- Verify all bolts are tightened. Do not overtighten.
- For models with an under-crib storage drawer, assemble and install the drawer according to the separate instructions provided.
Image: The DaVinci Ashbury Crib in its infant configuration, displaying its overall dimensions: 150.18 cm (59.25 inches) length, 78.11 cm (30.75 inches) width, and 126.67 cm (49.75 inches) height.
Image: The DaVinci Ashbury Crib with its integrated under-crib storage drawer pulled open, revealing two compartments for storing baby essentials.
Operating Instructions
Mattress Height Adjustment:
The DaVinci Ashbury crib features 4 adjustable mattress positions. The mattress support should be lowered as your child grows and becomes more active. Always use the lowest position once your child can sit up unassisted.
- Highest Position: For newborns and infants who cannot push up on hands and knees.
- Mid-High Position: For infants who can push up on hands and knees.
- Mid-Low Position: For infants who can sit up unassisted.
- Lowest Position: For toddlers who can stand.
To adjust the mattress height, remove the mattress and mattress support. Reattach the mattress support to the desired height setting, ensuring all fasteners are securely tightened.
Crib Conversion:
The Ashbury crib converts into a toddler bed, daybed, and full-size bed. Each conversion requires specific kits, which are sold separately.
1. Toddler Bed Conversion (Toddler Conversion Kit #M17399):
To convert the crib to a toddler bed, remove the front side rail and replace it with the toddler safety rail from kit #M17399. Ensure the mattress support is in the lowest position.
Image: The DaVinci Ashbury crib converted into a toddler bed, featuring a low safety rail on the front for easy access while preventing falls. The mattress is in the lowest position.
Image: A close-up view of the DaVinci Ashbury toddler bed, styled with bedding and pillows, demonstrating its use for a growing child.
2. Daybed Conversion:
To convert the crib to a daybed, simply remove the front side rail. No additional kit is required for this conversion. Ensure the mattress support is in the lowest position.
Image: The DaVinci Ashbury crib converted into a daybed, with the front rail removed, providing an open seating or sleeping area. The mattress is in the lowest position.
3. Full-Size Bed Conversion (Full-Size Conversion Kit #M7689):
To convert the crib to a full-size bed, you will need the full-size conversion kit #M7689. This kit typically includes two longer side rails and mattress support slats. Remove the headboard and footboard from the crib, attach the new side rails, and install the mattress support system.
Image: The DaVinci Ashbury crib components reconfigured into a full-size bed, utilizing the original headboard and footboard with extended side rails.
Care and Maintenance
- Cleaning: Wipe the crib surfaces with a dry cloth. For stubborn marks, use a damp cloth with mild soap and water, then dry immediately. Avoid abrasive cleaners or strong chemicals, as they may damage the finish.
- Inspections: Regularly inspect all hardware and structural components for tightness and wear. Tighten any loose fasteners.
- Storage: If storing the crib, disassemble it carefully and store all parts and hardware in a dry, temperature-controlled environment.
- Finish: The crib features a non-toxic, multi-step painting process. Avoid scratching or chipping the finish.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty during assembly. | Instructions may be complex; parts not correctly oriented or aligned. | Review all assembly steps carefully. Ensure parts are facing the correct direction. It is recommended to have two people for assembly. Do not force parts together. |
| Crib feels wobbly or unstable. | Loose hardware or incorrect assembly. | Check all bolts, screws, and fasteners. Tighten them securely, but do not overtighten. Ensure all components are fully seated. |
| Under-crib drawer is flimsy or does not slide smoothly. | Drawer components not fully assembled or aligned. | Verify all drawer assembly steps. Ensure drawer slides are properly installed and aligned. Apply wood glue to joints if necessary for added stability. |
| Missing or damaged parts. | Manufacturing defect or shipping damage. | Do not attempt to use the crib. Contact DaVinci customer support immediately for replacement parts. |
Product Specifications
- Model Number: M8201RW
- Brand: DaVinci
- Manufacturer: Million Dollar Baby Classic
- Color: White
- Primary Material: New Zealand Pine Wood and TSCA compliant MDF
- Furniture Finish: Pine
- Product Dimensions (Crib): 150.18 cm (L) x 78.11 cm (W) x 126.67 cm (H) / 59.25 in (L) x 30.75 in (W) x 49.75 in (H)
- Item Weight: 35.83 kg (79 Pounds)
- Shipping Weight: 41.5 kg
- Capacity: 4-in-1 Convertible (Crib, Toddler Bed, Daybed, Full-Size Bed)
- Special Features: GREENGUARD Gold Certified, Convertible
- Assembly Required: Yes
- Care Instructions: Wipe with Dry Cloth
- Included Components: Crib (Mattress not included, despite some data suggesting otherwise. Mattress support is included.)
Warranty Information
For detailed warranty information regarding your DaVinci Ashbury 4-in-1 Convertible Crib, please refer to the warranty card included with your product packaging or visit the official DaVinci Baby website. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase. Proof of purchase is usually required for all warranty claims.
Customer Support
If you have any questions, require replacement parts, or need assistance with assembly or operation, please contact DaVinci Baby customer support. Contact information can typically be found on the manufacturer's website or on the product packaging.
Manufacturer: Million Dollar Baby Classic (Brand: DaVinci)
For the most current contact details, please visit the official DaVinci Baby website.
