Viper Remote Replacement 7345V User Manual

Product Overview

The Viper 7345V is a premium LCD 2-way remote designed as an additional or replacement remote for compatible Viper security and remote start systems. It offers up to 1/4 mile range and provides visual and audible confirmation of commands.

Key Features

• 2-Way communication with up to 1/4 mile range.
• LCD display for visual feedback and system status.
• 4-Button control for various functions (Lock, Unlock, AUX, Remote Start).
• Provides visual and audible confirmation when commands are sent successfully.
• Priority icons map for simple and clear vehicle monitoring.
• Compatible with Viper Systems: 4305V, 3305V, 5305V.

Figure 1: Front view of the Viper 7345V 2-Way LCD Remote Control, showing the LCD screen and four control buttons (Lock, Unlock, AUX, and Remote Start).

Figure 2: Angled view of the Viper 7345V 2-Way LCD Remote Control, highlighting its ergonomic design and button layout.

Setup: Programming Your Remote

To program your new Viper 7345V remote control to your existing Viper system, follow these steps carefully. Ensure the system's Valet/Program switch is plugged into the BLUE port before beginning.

1. Door: Open a vehicle door.
2. Key: Turn the vehicle's ignition key to the ON position.
3. Choose Channel: Within 5 seconds, press and release the Valet/Program button the number of times corresponding to the desired channel (see table below). After selecting the channel, press the Valet/Program button once more and hold it. The system's LED will flash the same number of times as the selected channel, and the siren will chirp to confirm the selection. DO NOT release the Valet/Program button yet.
4. Transmit: While still holding the Valet/Program button, press the desired button on the new transmitter (remote control). The unit will chirp to confirm that the transmitter has been successfully programmed to the receiver.
5. Release: Once the code is learned, you may release the Valet/Program button and remove the ignition key.

Transmitter Channel Selection:

Note: For detailed transmitter operation and auto-learn configurations, refer to your Viper system's owner's guide.

Operating Instructions: Remote Control Functions

The Viper 7345V remote features four primary buttons and an LCD screen to provide comprehensive control and feedback for your vehicle's security system.

• Lock Button (🔒): Press to arm your vehicle's security system and lock the doors. The LCD will display a locked icon and provide confirmation.
• Unlock Button (🔓): Press to disarm your vehicle's security system and unlock the doors. The LCD will display an unlocked icon and provide confirmation.
• AUX Button: This button controls auxiliary functions, which may vary depending on your system's installation. Common uses include trunk release or other custom features. Refer to your system's owner's guide for specific AUX function details.
• Remote Start/Star Button (✱): Press and hold to remotely start your vehicle (if equipped with remote start). The LCD will show engine status and provide confirmation.
• LCD Display: The LCD screen provides visual feedback on the vehicle's status, including door lock status, alarm armed/disarmed status, remote start status, and battery level.

Maintenance: Battery Replacement

The Viper 7345V remote control is powered by one AAA battery. When the battery level is low, the LCD display may dim or the remote's range may decrease. Replace the battery as follows:

1. Locate the battery compartment cover on the back of the remote.
2. Carefully open the cover using a small flat-head screwdriver or a coin if necessary.
3. Remove the old AAA battery.
4. Insert a new AAA battery, ensuring correct polarity (+ and -).
5. Replace the battery compartment cover securely.

Note: Dispose of old batteries responsibly according to local regulations.

Troubleshooting

If you experience issues with your Viper 7345V remote, consider the following common solutions:

• Remote Not Responding:
  • Check the remote's battery and replace if necessary.
  • Ensure you are within the operating range of the vehicle's system.
  • Verify that the vehicle's security system is powered and functioning correctly.
• Reduced Range:
  • Replace the remote's battery.
  • Environmental factors (e.g., large buildings, radio interference) can affect range. Try operating the remote in a different location.
• LCD Display Issues:
  • If the display is dim or blank, replace the battery.
  • Ensure the remote has not been exposed to extreme temperatures or moisture.
• Remote Not Programming:
  • Double-check all steps in the "Programming Your Remote" section.
  • Ensure the Valet/Program switch is correctly connected and functioning.
  • Confirm compatibility with your specific Viper system model (4305V, 3305V, 5305V).

If problems persist after attempting these solutions, contact Viper customer support or a certified installer.

Technical Specifications

Warranty and Support

For specific warranty details and terms, please refer to the documentation included with your original Viper security or remote start system, or visit the official Viper website. Keep your proof of purchase for warranty claims.

If you require technical assistance, have questions about your product, or need to troubleshoot further, please contact Viper customer support. Contact information can typically be found on the Viper website or in your system's original manual.

You can also visit the Viper Store on Amazon for additional product information and resources.