Product Overview
The Fellowes AeraMax 200 Air Purifier is designed to effectively purify air in medium-sized rooms, typically 200 to 400 square feet, achieving 3-5 air changes per hour (ACH). For larger spaces up to 1068 square feet, it can achieve 1 ACH. This advanced system utilizes 4-stage True HEPA filtration to capture up to 99.97% of airborne particles as small as 0.3 microns, including allergens, dust, pet dander, mold spores, and smoke. An integrated carbon filter actively removes odors and volatile organic compounds (VOCs).
Equipped with an AeraSmart sensor, the purifier intelligently monitors air quality and automatically adjusts fan speed to maintain optimal air purification. The optional PlasmaTrue Technology uses ionization to safely remove airborne pollutants, while Aera+ mode provides 35% more air exchanges during peak allergy and cold/flu seasons.
Setup
- Unpacking: Carefully remove the air purifier from its packaging. Ensure all components, including the pre-installed filters, are present.
- Filter Preparation: Before first use, open the filter compartment and remove any plastic wrapping from the True HEPA and Carbon filters.
- Filter Installation: Insert the filters back into their designated slots. Ensure they are securely in place.
- Placement: Place the air purifier on a flat, stable surface in the room where air purification is desired. Ensure there is adequate space around the unit for optimal airflow.
- Power Connection: Plug the power cord into a standard electrical outlet.
Operating Instructions
The AeraMax 200 features an intuitive control panel for easy operation.
- Power On/Off: Press the power button on the control panel to turn the unit on or off.
- Fan Speed Adjustment: Cycle through different fan speeds (low, medium, high, turbo) by pressing the fan speed button. The current speed will be indicated by illuminated bars.
- Auto Mode: Activate Auto Mode by pressing the 'Auto' button. The AeraSmart sensor will detect air quality and automatically adjust the fan speed.
- Aera+ Mode: For increased air purification during allergy or flu seasons, activate Aera+ Mode. This increases air exchanges by 35%.
- PlasmaTrue Technology: This optional setting utilizes ionization to safely remove airborne pollutants. Activate or deactivate it as desired.
- Filter Reset: After replacing filters, press and hold the filter reset button until the indicator light turns off.
Official Fellowes video demonstrating the features and operation of the AeraMax 200 Air Purifier.
Maintenance
Regular filter replacement is crucial for maintaining the performance and efficiency of your AeraMax 200 Air Purifier. The unit features indicator lights to notify you when filters need to be changed.
Filter Replacement Schedule:
- Carbon Filter: Replace approximately every 3 months, or when the Carbon filter indicator light illuminates.
- True HEPA Filter: Replace approximately every 12 months, or when the HEPA filter indicator light illuminates. The AeraSafe antimicrobial treatment on the True HEPA filter helps inhibit the growth of odor and stain-causing microorganisms.
Steps for Filter Replacement:
- Unplug the air purifier from the power outlet.
- Open the filter access panel (usually on the side or back of the unit).
- Remove the old filters. Dispose of them properly.
- Insert new filters, ensuring they are oriented correctly.
- Close the filter access panel.
- Plug the air purifier back in.
- Press and hold the corresponding filter reset button on the control panel until the indicator light turns off.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power; power switch off | Ensure unit is plugged in; check power switch on the back. |
| Filter indicator light remains on after replacement | Filter reset not performed | Press and hold the corresponding filter reset button until the light turns off. |
| Reduced airflow or unusual odors | Clogged filters | Replace Carbon and/or True HEPA filters as needed. |
Specifications
- Model Number: 9320401
- Color: White
- Product Dimensions: 7.5"D x 13.4"W x 20.5"H
- Recommended Room Size: 200 - 400 sq ft (3-5 ACH)
- Max Coverage (1 ACH): 1068 Square Feet
- Filter Type: True HEPA (with AeraSafe antimicrobial treatment), Carbon Filter
- Filtration Stages: 4-Stage Purification
- Particle Retention Size: 0.3 Micrometer
- Noise Level: 60 Decibels
- Controller Type: Button Control
- Wattage: 62 watts
- Item Weight: 10.1 pounds
- Certifications: AHAM Certified, CARB Certified, UL Certified
- Included Components: Machine and Filters
Warranty & Support
The Fellowes AeraMax 200 Air Purifier comes with a 3-Year Limited Warranty. For support, please contact Fellowes customer service or visit their official website.
Manufacturer: Fellowes
