Cameo CONTROL 6 6-Channel DMX Controller

1. Introduction

The Cameo CONTROL 6 is a compact and versatile 6-channel DMX controller designed for managing small lighting systems. Its intuitive design and robust construction make it suitable for various applications, from stage lighting to architectural installations. This manual provides essential information for the safe and efficient operation of your DMX controller.

Key Features:

• Universal 6-channel DMX control
• Battery operation capability for portable use
• Includes external power supply
• Durable metal housing

2. Safety Instructions

Please read these safety instructions carefully before operating the device. Keep this manual for future reference.

• Electrical Safety: Ensure the power supply voltage matches the device requirements. Use only the provided power adapter or a compatible 9V-12V DC power source. Disconnect power before cleaning or servicing.
• Environment: Do not expose the device to rain, moisture, or extreme temperatures. Operate in a dry, well-ventilated area.
• Handling: Avoid dropping or subjecting the device to strong impacts. Do not open the casing; refer all servicing to qualified personnel.
• Battery Use: If using battery power, ensure correct polarity when inserting the 9V block battery. Remove the battery if the device will not be used for an extended period.

3. Package Contents

Verify that all items are present upon unpacking:

• Cameo CONTROL 6 DMX Controller
• 9V Block Battery
• AC Adapter / Power Supply
• User Manual (this document)

4. Product Overview

Familiarize yourself with the various components of your Cameo CONTROL 6 DMX Controller.

Figure 4.1: Overall view of the Cameo CONTROL 6 DMX Controller, showcasing its compact design and fader layout.

4.1 Front Panel

Figure 4.2: Front panel of the DMX controller, showing the six channel faders and the master fader.

• Channel Faders (1-6): Control the DMX output level for each of the six individual channels.
• Master Fader: Adjusts the overall DMX output level for all channels simultaneously.
• Power LED: Indicates when the unit is powered on.

4.2 Rear Panel

Figure 4.3: Rear panel connections, including DC input, power switch, and DMX output.

• DC Input (+9V-12V): Connect the external power supply here.
• Power Switch: Turns the device on or off.
• DMX OUT (XLR 3-pin female): Connects to DMX-compatible lighting fixtures. Pin configuration is 1=Ground, 2=Data-, 3=Data+.

4.3 Bottom Panel

Figure 4.4: Bottom panel, showing the DC-9V battery compartment.

• DC-9V Battery Compartment: Houses the 9V block battery for portable operation.

5. Setup

5.1 Power Connection

The CONTROL 6 can be powered by the included external AC adapter or a 9V block battery.

1. External Power: Connect the included AC adapter to the DC Input (+9V-12V) on the rear panel. Plug the adapter into a suitable power outlet.


Figure 5.1: The external AC adapter provided with the DMX controller.

2. Battery Power: Open the battery compartment on the bottom panel. Insert a 9V block battery, ensuring correct polarity. Close the compartment. The unit will automatically switch to battery power if the external adapter is disconnected.

5.2 DMX Connection

Connect the DMX OUT port of the CONTROL 6 to the DMX IN port of your first DMX-compatible lighting fixture using a standard 3-pin XLR DMX cable. If you have multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on.

6. Operating

Once powered on and connected, the CONTROL 6 is ready for operation.

Figure 6.1: Angled view of the faders, demonstrating their use for controlling DMX channels.

1. Power On: Flip the Power Switch on the rear panel to the 'ON' position. The Power LED on the front panel will illuminate.
2. Channel Control: Use the individual Channel Faders (1-6) to adjust the DMX output level for each corresponding channel. Moving a fader up increases the DMX value (typically brightness or intensity), while moving it down decreases the value.
3. Master Control: The Master Fader controls the overall output level of all active DMX channels. Moving the Master Fader down will dim all active channels proportionally, regardless of their individual fader positions. Moving it up will restore their levels up to their individual fader settings.

7. Maintenance

7.1 Cleaning

To maintain the appearance and functionality of your controller:

• Disconnect power before cleaning.
• Use a soft, dry cloth to wipe the surface.
• Do not use abrasive cleaners, solvents, or chemical sprays.

7.2 Storage

When not in use for extended periods, store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Remove the 9V battery if storing for a long duration.

8. Troubleshooting

If you encounter issues with your Cameo CONTROL 6, refer to the following common solutions:

• No Power: Ensure the AC adapter is securely connected and plugged into a working outlet, or that the 9V battery is correctly installed and charged. Check the power switch position.
• No DMX Output: Verify that the DMX cable is securely connected between the controller and the first fixture. Ensure the DMX fixtures are powered on and set to the correct DMX address. Check that individual channel faders and the master fader are raised.
• Intermittent Control: Check all cable connections for looseness or damage. Ensure no other DMX devices are interfering with the signal.

If problems persist, contact customer support for further assistance.

9. Specifications

10. Warranty and Support

Cameo products are designed for reliability and performance. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Cameo website. Keep your proof of purchase for any warranty claims.