1. Introduction
This manual provides essential information for the safe and proper operation, setup, and maintenance of your Piko V 200.0 Diesel Locomotive, Model 59700. This model is designed for H0 1:87 scale railway systems utilizing DC (Direct Current) power.
2. Safety Instructions
- Always disconnect power to the track before placing or removing the locomotive.
- This product is not a toy and is intended for hobbyists aged 14 and older. It contains small parts that could be a choking hazard for young children.
- Operate the locomotive on a stable, level surface to prevent derailment and damage.
- Avoid exposing the locomotive to extreme temperatures, direct sunlight, or high humidity.
- Do not attempt to modify the electrical components of the locomotive. Refer to qualified service personnel for repairs.
3. Package Contents
Upon opening the package, please verify that all components are present and undamaged:
- Piko V 200.0 Diesel Locomotive (Model 59700)
- Instruction Manual (this document)
- Any additional small parts or accessories (e.g., detail parts, couplers) as specified on the packaging.
If any items are missing or damaged, please contact your retailer or Piko customer support.
4. Setup
- Track Preparation: Ensure your H0 scale track is clean, properly assembled, and free of obstructions. A clean track ensures reliable electrical contact.
- Power Connection: Connect your DC power pack to the track according to the power pack's instructions. Ensure the power pack is set to DC output.
- Placing the Locomotive: Carefully place the Piko V 200.0 locomotive onto the track, ensuring all wheels are correctly seated on the rails. The locomotive is designed for H0 1:87 scale DC operation.
- Initial Inspection: Before applying power, visually inspect the locomotive for any loose parts or damage that may have occurred during shipping.
5. Operating Instructions
The Piko V 200.0 Diesel Locomotive is designed for smooth operation on H0 1:87 scale DC layouts.
- Power On: Turn on your DC power pack.
- Direction Control: Use the direction switch on your power pack to select forward or reverse.
- Speed Control: Slowly increase the throttle on your power pack. The locomotive should begin to move smoothly. Avoid sudden changes in speed or direction, especially at higher speeds, to prevent derailment.
- Lighting: The locomotive features directional lighting. Headlights will illuminate in the direction of travel.
- Coupling: If coupling with other rolling stock, ensure the couplers are aligned and engage properly.
6. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your locomotive.
- Cleaning Wheels and Track: Periodically clean the locomotive's wheels and the track rails with a soft, lint-free cloth and a specialized track cleaning fluid. Dirt and grime can impair electrical contact and running performance.
- Lubrication: After extended periods of operation (e.g., 20-30 hours), apply a small amount of model railway lubricant to the gear train and axle bearings. Refer to the locomotive's exploded diagram (if provided separately) for specific lubrication points. Avoid over-lubrication.
- Body Cleaning: Clean the locomotive body with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but avoid harsh chemicals or abrasive materials.
- Storage: When not in use, store the locomotive in its original packaging or a protective case, away from dust, direct sunlight, and extreme temperatures.
7. Troubleshooting
If you encounter issues with your Piko V 200.0 locomotive, consult the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Locomotive does not move. | No power to track; dirty track/wheels; locomotive not seated correctly; faulty power pack. | Check power connections; clean track and wheels; re-seat locomotive; test power pack. |
| Erratic movement or stalling. | Dirty track/wheels; poor electrical contact; track unevenness. | Clean track and wheels thoroughly; ensure track sections are securely joined; check for track deformities. |
| Lights not working. | No power; bulb failure; wiring issue. | Check power; inspect bulbs (if replaceable); contact support if wiring is suspected. |
8. Specifications
- Model Number: 59700
- Scale: H0 (1:87)
- Power System: DC (Direct Current)
- Product Dimensions: 11.69 x 3.31 x 2.01 inches (29.7 x 8.4 x 5.1 cm)
- Item Weight: 13.4 ounces (380 grams)
- Manufacturer: Piko
- Release Date: February 1, 2014
- EAN: 4015615597001
9. Warranty and Support
Piko products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Piko website. For technical support, spare parts, or service inquiries, please contact your authorized Piko dealer or Piko customer service directly.
Contact information can typically be found on the Piko official website: www.piko.de
