Simplex 4090-9001 IAM Supervised IDNet Module Instruction Manual

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of the Simplex 4090-9001 IAM Supervised IDNet Module. Please read this manual thoroughly before attempting to install or operate the device. Retain this manual for future reference.

2. Safety Information

WARNING: Installation and servicing of this device must be performed by qualified personnel only. Failure to follow these instructions could result in property damage, serious injury, or death. Always disconnect power before servicing.

Adhere to all local and national electrical codes and regulations.
Ensure proper grounding and wiring connections.
Do not operate the device if it appears damaged.
Keep away from moisture and extreme temperatures.

3. Product Overview

The Simplex 4090-9001 is an Individual Addressable Module (IAM) designed for use within a supervised IDNet system. It is housed in a durable thermoplastic casing, providing protection for its internal components. This module facilitates communication and supervision of connected devices within a fire alarm or security system.

Line drawing of the Simplex 4090-9001 IAM module

Figure 3.1: Line drawing of the Simplex 4090-9001 IAM Supervised IDNet Module. This image shows the front view of the module with its label, indicating the model number and "SUPERVISED IAM" text.

Simplex 4090-9001 module in clear plastic packaging with label

Figure 3.2: The Simplex 4090-9001 module shown within its clear plastic packaging. The packaging includes a label with "PID: 4090-9001", "DESCRIPTION: IAM SUPERVISED IDNET", and "PART NUMBER: 0617952". Small resistors are also visible in the package.

4. Setup and Installation

The Simplex 4090-9001 module is designed for screw mount installation. Detailed installation instructions are provided in the separate document "INST. INSTR. 574-331", which typically accompanies the product. Always refer to this document for specific wiring diagrams and mounting procedures.

4.1. Pre-Installation Checks

Verify that the module is the correct model (4090-9001) for your system.
Inspect the module for any signs of physical damage.
Ensure all necessary tools and additional components (e.g., screws, wiring) are available.

4.2. Mounting

The module features a screw mount design. Select a suitable, secure location for mounting, ensuring it is free from excessive vibration, moisture, and extreme temperatures. Use appropriate fasteners for the mounting surface.

4.3. Wiring

The module utilizes screw-type connectors for wiring. Refer to the "INST. INSTR. 574-331" document for detailed wiring diagrams specific to your system configuration. Ensure all connections are secure and comply with applicable electrical codes. The module operates at 40 Volts.

5. Operation

Once properly installed and connected to a compatible Simplex IDNet control panel, the 4090-9001 module functions as an interface for supervising and monitoring various devices. It communicates the status of these devices back to the control panel, allowing for centralized monitoring and response in a fire safety or security system. The module's operation is largely automatic once configured within the IDNet system.

6. Maintenance

Regular maintenance is crucial to ensure the continued reliable operation of the Simplex 4090-9001 module and the overall fire safety system. It is recommended that a qualified technician perform periodic inspections and tests.

Visual Inspection: Periodically check the module and its wiring for any signs of damage, corrosion, or loose connections.
System Testing: Follow the testing procedures outlined in your fire alarm system's documentation to ensure the module is communicating correctly with the control panel.
Cleaning: If necessary, gently clean the exterior of the thermoplastic housing with a dry, soft cloth. Do not use abrasive cleaners or solvents.

7. Troubleshooting

If the Simplex 4090-9001 module is not functioning as expected, consider the following basic troubleshooting steps. For complex issues, contact qualified service personnel.

No Communication:
- Verify all wiring connections are secure and correct according to "INST. INSTR. 574-331".
- Check power supply to the IDNet system.
- Ensure the module's address is correctly configured in the control panel.
Fault Indication:
- Consult your IDNet control panel's manual for specific fault codes and their meanings.
- Inspect the connected device(s) for faults.
Physical Damage: If the module shows signs of physical damage, it should be replaced by a qualified technician.

8. Specifications

Feature	Detail
Model Number	4090-9001
Brand	Simplex
Description	IAM Supervised IDNet Module
Housing Material	Thermoplastic (Plastic)
Color	BLACK
Product Dimensions	8 x 8 x 4 inches
Item Weight	0.01 ounces
Voltage	40 Volts
Connector Type	Screw
Mounting Type	Screw Mount
UPC	683194549410

9. Warranty and Support

Specific warranty information for the Simplex 4090-9001 module is typically provided at the point of purchase or can be obtained directly from Simplex or an authorized distributor. For technical support, service, or warranty claims, please contact your Simplex supplier or an authorized service center. Always provide the model number (4090-9001) and any relevant serial numbers when seeking support.

For further assistance, you may visit the official Simplex website or consult the documentation provided with your complete fire alarm system.

	Módulo Endereçável Individual Simplex 4090-9007 IDNet para Sinalização de Alarme de Incêndio Este documento técnico detalha o Módulo Endereçável Individual (IAM) Simplex 4090-9007 IDNet, projetado para fornecer sinalização adicional em painéis de controle de alarme de incêndio Simplex séries 4007ES, 4008, 4010ES, 4100ES e 4100U. Inclui características, recursos de supervisão, detalhes de operação, especificações elétricas e mecânicas, requisitos de fiação e informações de montagem para otimização de sistemas de alarme de incêndio.
	Módulo Direccionable Individual Simplex 4090-9007 IAM de Señal para Paneles de Alarma de Incendios Descubra el Módulo Direccionable Individual (IAM) de Señal Simplex 4090-9007, un periférico IDNet para paneles de control de alarma de incendios 4007ES, 4008, 4010ES, 4100ES y 4100U. Proporciona señalización selectiva, supervisión de NAC, control de audio y cumple con UL, ULC, CSFM y FM.
	Simplex 4090-9007 IDNet Signal IAM: Addressable Module for Fire Alarm Systems Detailed technical specifications and features for the Simplex 4090-9007 IDNet Signal Individual Addressable Module (IAM), designed for enhanced selective signaling and audio control in Simplex 4100ES, 4010ES, 4100U, and 4008 Series fire alarm control panels. Includes wiring, operation, and mounting information.
	Simplex 4090-9101, 4090-9106 Monitor ZAM Installation Instructions Installation instructions for Simplex 4090-9101 and 4090-9106 Monitor Zone Adapter Modules (ZAMs). Covers mechanical installation, address setting via DIP switches, and electrical connections for IDNet and MAPNET II systems.
	Simplex IDNet Signal IAM Installation Instructions Detailed installation instructions for the Simplex 4090-9007 IDNet Addressable Signal Individual Adapter Module (Signal IAM), covering address setting, wiring configurations for Class A and Class B Notification Appliance Circuits (NACs), and mounting procedures. This guide provides essential information for integrating the Signal IAM with fire alarm control panels and notification appliances.
	Simplex 4090-9116 Aislador de Comunicaciones IDNet Direccionable - Especificaciones Técnicas Documento técnico detallado sobre el Aislador de Comunicaciones IDNet Direccionable Simplex 4090-9116, cubriendo sus características, operación, ejemplos de instalación, especificaciones eléctricas y mecánicas para sistemas de alarma contra incendios.