Channellock E337 E Series 7-Inch Diagonal Cutting Plier

Introduction

The Channellock E337 E Series 7-Inch Diagonal Cutting Plier is a professional-grade hand tool engineered for superior cutting performance. Featuring Channellock's innovative Lap XLT Joint and comfortable Code Blue Grips, this plier is designed to provide maximum cutting power with significantly less effort. Constructed from high-carbon C1080 steel, it ensures durability and long-lasting sharpness for a wide range of cutting tasks.

Product Overview

The Channellock E337 is distinguished by several key features that enhance its functionality and user experience:

• XLT Xtreme Leverage Technology: This advanced design requires considerably less force to cut compared to traditional high-leverage pliers, reducing user fatigue.
• Lap Joint Diagonal: Provides a robust and precise cutting action.
• Knife and Anvil Style Cutting Edge: Ensures perfect mating of the cutting edges and superior cutting edge life, allowing for clean and efficient cuts.
• Sleeker, Lighter Design: Streamlined for easier handling and improved maneuverability in various applications.
• Made in the USA: Manufactured with high-quality standards in the United States.
• High-Carbon C1080 Steel: Provides superior performance and is specially coated for ultimate rust prevention, ensuring tool longevity.
• Code Blue Grips: Ergonomically designed handles for enhanced comfort and control during prolonged use.

Setup

The Channellock E337 Diagonal Cutting Plier requires minimal setup before use. Upon receiving your tool, please follow these steps:

1. Unpackaging: Carefully remove the plier from its packaging.
2. Initial Inspection: Inspect the plier for any signs of shipping damage, such as bent handles, chipped cutting edges, or a stiff joint. If any damage is observed, do not use the tool and contact customer support.
3. Familiarization: Open and close the plier jaws several times to ensure smooth operation of the joint. Familiarize yourself with the ergonomic Code Blue Grips.
4. Cleanliness: Wipe down the plier with a clean, dry cloth to remove any manufacturing residues or packaging dust.

Your Channellock E337 plier is now ready for use.

Operating Instructions

The Channellock E337 Diagonal Cutting Plier is designed for efficient and precise cutting of various materials. Always prioritize safety and use the tool for its intended purpose.

General Use:

1. Grip: Hold the plier firmly with the Code Blue Grips, ensuring a comfortable and secure hold.
2. Positioning: Open the jaws and position the material to be cut as close to the pivot point as possible. This maximizes the leverage provided by the XLT technology.
3. Cutting: Apply steady, firm pressure to the handles until the material is cleanly cut. The knife and anvil style cutting edges are designed for efficient shearing.
4. Safety: Always wear appropriate personal protective equipment, such as safety glasses, when cutting to protect against flying debris.

Suitable Materials:

• Soft and medium-hard wires (e.g., copper, aluminum, mild steel wire).
• Small nails and brads.
• Plastic components and zip ties.
• Electrical wires (ensure power is off and use insulated handles for safety, though these are not rated for live electrical work).

Unsuitable Materials:

• Hardened steel, piano wire, or other extremely hard materials, as this can damage the cutting edges.
• Live electrical wires without proper insulation and training.
• Materials exceeding the plier's cutting capacity.

Do not use the plier as a hammer, pry bar, or for any purpose other than cutting.

Maintenance

Proper maintenance will extend the life and performance of your Channellock E337 Diagonal Cutting Plier.

• Cleaning: After each use, wipe down the plier with a clean, dry cloth to remove dirt, debris, and moisture. For stubborn grime, a mild solvent can be used, followed by thorough drying.
• Lubrication: Periodically apply a few drops of light machine oil to the pivot joint. Open and close the plier several times to distribute the oil evenly. This ensures smooth operation and prevents rust.
• Storage: Store the plier in a dry environment to prevent corrosion. Avoid storing it in damp or humid conditions.
• Edge Care: Avoid dropping the plier or using it to cut inappropriate materials, as this can chip or dull the cutting edges. If the edges become dull, professional sharpening may be required.
• Inspection: Regularly inspect the cutting edges for nicks or damage. Check the joint for excessive play or stiffness.

Troubleshooting

This section addresses common issues you might encounter with your Channellock E337 Diagonal Cutting Plier.

If the problem persists or if the tool is severely damaged, discontinue use and consider replacement or professional repair.

Specifications

Warranty and Support

Channellock, Inc. stands behind the quality of its products. While specific warranty details may vary, Channellock tools are generally known for their durability and are often backed by a manufacturer's warranty against defects in material and workmanship.

For detailed warranty information, product registration, or to contact customer support regarding your Channellock E337 Diagonal Cutting Plier, please visit the official Channellock website or refer to the documentation included with your purchase.

Official Channellock Website: www.channellock.com

When contacting support, please have your product model number (E337) and any purchase information readily available.