Introduction
This manual provides comprehensive instructions for the operation and maintenance of your Armitron Sport Men's Digital Chronograph Resin Strap Watch, model 40/8284ORG. This timepiece features a digital display, chronograph with lap time, alarm, dual time, military time, and a backlight function. It is designed for durability and functionality, suitable for various activities.
Front view of the Armitron Sport Digital Chronograph Watch in grey and orange, displaying the time and various digital indicators.
Watch Components
Familiarize yourself with the buttons and display areas of your watch.
- MODE Button: Used to cycle through different watch modes (Time, Chronograph, Alarm, Dual Time).
- RESET Button: Used to reset values or select options during setting.
- ST/STP Button: Used to start/stop functions (e.g., chronograph) or adjust values during setting.
- EL Button: Activates the Electro-Luminescent backlight for illumination.
Side view of the watch, highlighting the functional buttons on the casing.
Setup and Time Setting
To ensure accurate timekeeping and full functionality, follow these steps to set up your watch.
- Entering Setting Mode: In normal time display mode, press and hold the MODE button until the seconds begin to flash. This indicates you are in setting mode.
- Selecting Items: Press the RESET button to cycle through the items to be set: seconds, hour, minute, year, month, day, 12/24-hour format.
- Adjusting Values: Use the ST/STP button to increase the flashing value. Hold the button to advance rapidly.
- Confirming Settings: Once all desired settings are adjusted, press the MODE button again to exit the setting mode and return to normal time display.
- 12/24-Hour Format: When the hour is flashing, press the ST/STP button to toggle between 12-hour (with AM/PM indicator) and 24-hour (military) time formats.
Operating Instructions
Chronograph Function
The chronograph measures elapsed time.
- Accessing Chronograph: From normal time display, press the MODE button repeatedly until "CHRONO" or "STW" appears on the display.
- Start/Stop: Press the ST/STP button to start the chronograph. Press it again to stop.
- Lap Time: While the chronograph is running, press the RESET button to record a lap time. The display will show the lap time for a few seconds before returning to the running total.
- Reset: When the chronograph is stopped, press the RESET button to clear the time to zero.
Alarm Function
Set an alarm to sound at a specific time.
- Accessing Alarm: From normal time display, press the MODE button repeatedly until "ALARM" appears.
- Setting Alarm: Press the RESET button to select the hour or minute. Use the ST/STP button to adjust the value.
- Activating/Deactivating Alarm: In alarm mode, press the ST/STP button to toggle the alarm ON/OFF. An alarm icon will appear when activated.
- Snooze: When the alarm sounds, press the RESET button to activate snooze (if available) or any other button to stop the alarm.
Dual Time Function
Display a second time zone.
- Accessing Dual Time: From normal time display, press the MODE button repeatedly until "DUAL TIME" or "T2" appears.
- Setting Dual Time: Press the RESET button to select the hour or minute. Use the ST/STP button to adjust the value.
Backlight Function
Illuminate the display in low-light conditions.
- Press the EL button to activate the backlight. The backlight will remain on for a few seconds.
Water Resistance
This Armitron Sport watch is water resistant to 330 feet (100 meters). This rating indicates suitability for snorkeling and swimming, but it is not recommended for scuba diving.
A chart illustrating different levels of water resistance for watches, indicating that 100m (330ft) is suitable for swimming and snorkeling.
Important: Do not operate the watch buttons while submerged in water, as this can compromise the water resistance seal. Avoid exposing the watch to extreme temperature changes (e.g., hot showers, saunas) as this can also affect the seals.
Maintenance and Care
- Cleaning: Wipe the watch case and strap regularly with a soft, damp cloth. For resin straps, mild soap and water can be used, then rinse thoroughly and dry.
- Avoid Chemicals: Do not expose the watch to strong chemicals, solvents, or detergents, as these can damage the case, strap, or internal components.
- Temperature: Store the watch in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery: The watch uses 1 Lithium Ion battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and water resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or depleted battery. | Replace the battery. |
| Time is incorrect. | Time not set correctly or accidental button press. | Refer to the "Setup and Time Setting" section to reset the time. |
| Buttons are unresponsive. | Watch may be in a frozen state or battery issue. | Try a soft reset (if applicable, by holding all buttons for a few seconds) or replace the battery. If problem persists, contact support. |
| Water inside the watch. | Water resistance compromised (e.g., buttons pressed underwater, damaged seal). | Immediately take the watch to a qualified technician for inspection and repair to prevent further damage. |
Specifications
- Model Number: 40/8284ORG
- Movement: Quartz with Digital Display
- Case Material: Resin
- Strap Material: Resin
- Crystal Material: Protective Acrylic
- Water Resistance: 100 meters (330 feet)
- Functions: Chronograph with lap time, Alarm, Dual Time, Military Time, Backlight
- Battery: 1 Lithium Ion battery (included)
- Dimensions: 4.09 x 3.5 x 2.76 inches (Package)
- Weight: 5.29 ounces (Package)
Warranty and Support
Armitron watches are manufactured with quality and precision. For information regarding warranty coverage, service, or support, please refer to the warranty card included with your purchase or visit the official Armitron website.
You can also visit the Armitron Brand Store for more product information and support resources.