InSinkErator Evolution Plus 1000 EC Food Waste Disposer

Introduction

The InSinkErator Evolution Plus 1000 EC food waste disposer is designed for efficient and hygienic disposal of kitchen food waste. Featuring a powerful 1 HP induction motor and advanced MultiGrind technology, this unit provides a reliable solution for demanding kitchen environments. It processes various food residues, from soft fruit waste to tough fibrous materials, ensuring a clean and odor-free kitchen.

This manual provides essential information for the safe installation, operation, and maintenance of your Evolution Plus 1000 EC food waste disposer.

Safety Information

Please read all instructions carefully before installing or operating the food waste disposer. Failure to follow these instructions could result in electric shock, fire, or serious injury.

• Electrical Safety: Ensure the power supply is disconnected before installation or servicing. The disposer must be properly grounded. Do not operate with wet hands or while standing in water.
• Personal Safety: Never put hands or fingers into the disposer opening. Use the stopper or a long utensil to push food into the disposer. Keep children away from the disposer during operation.
• Prohibited Items: Do not dispose of glass, metal, plastic, large bones, clam or oyster shells, caustic drain cleaners, or hot grease into the disposer. These items can damage the unit or plumbing.
• Water Usage: Always run cold water while the disposer is operating and for a few seconds after it has finished grinding.

Setup and Installation

The InSinkErator Evolution Plus 1000 EC is designed for flexible installation and is compatible with sinks equipped with a 3.5-inch (90mm) drain valve. It requires a 1 6/4" pipe connection and a 33 mm hole for the air switch.

Installation Overview

• Ensure the sink flange is properly sealed and secured to the sink opening.
• Connect the disposer to the sink flange using the mounting assembly.
• Attach the drain pipe to the disposer's discharge outlet.
• Install the air switch button in a convenient location on the countertop or sink.
• Connect the disposer to a grounded electrical outlet.

Image: The InSinkErator Evolution Plus 1000 EC food waste disposer installed under a kitchen sink, showing its compact design and plumbing connections.

Dimensions

Refer to the diagram below for detailed dimensions to ensure proper fit and clearance under your sink.

Image: A technical diagram illustrating the dimensions of the InSinkErator Evolution Plus 1000 EC, including its height (31.2 cm) and drain pipe offset (14.6 cm).

• External Height: 312 mm (31.2 cm)
• External Diameter: 209 mm (20.9 cm)
• Drain Pipe Offset: Approximately 14.6 cm from center to center of the drain.
• Air Switch Hole Diameter: 33 mm

Operating Instructions

The Evolution Plus 1000 EC features a chrome air switch for convenient and safe operation.

Daily Use

1. Remove the sink stopper.
2. Turn on a medium flow of cold water.
3. Press the air switch button to activate the disposer.
4. Scrape food waste into the sink opening. The MultiGrind technology will process waste in two stages for fine grinding.
5. Continue running the disposer and cold water for a few seconds after grinding is complete to flush the system.
6. Press the air switch button again to turn off the disposer.

The large 980 ml grinding chamber efficiently handles various food residues, including fruit and vegetable scraps, small bones, and fibrous waste.

Image: A close-up front view of the InSinkErator Evolution Plus 1000 EC, highlighting its design and branding.

Septic Tank Compatibility

This system is suitable for use with well-maintained septic tanks, offering a sustainable alternative for food waste disposal.

Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your InSinkErator Evolution Plus 1000 EC.

• Cleaning: To clean the disposer, grind small pieces of citrus fruit (lemon, orange, or lime) with cold water. This helps to clean the grinding chamber and freshen the drain.
• Odor Prevention: Always run cold water for a few seconds after use to flush out any remaining food particles.
• Splash Guard: The splash guard is removable for cleaning. Periodically remove and clean it to prevent buildup.
• Dishwasher Connection: If connected to a dishwasher, ensure the dishwasher drain plug in the disposer inlet is removed during installation.

Troubleshooting

If your disposer is not operating correctly, try these common troubleshooting steps:

• Disposer Not Starting:
  • Check if the unit is plugged in securely.
  • Press the red reset button located on the bottom of the disposer.
  • Check your circuit breaker or fuse box.
• Disposer Hums but Doesn't Grind:
  • This indicates an object is jammed in the grinding chamber. Turn off the disposer and disconnect power.
  • Use an Allen wrench (provided with the unit) to insert into the center hole on the bottom of the disposer and turn it back and forth to free the jam.
  • Remove the object with tongs or pliers. Never use your hands.
  • Press the reset button before restarting.
• Leaks:
  • Check all plumbing connections for tightness.
  • Inspect the sink flange for proper sealing.
  • Ensure the dishwasher inlet plug is properly installed if not connecting a dishwasher, or removed if connecting one.

If these steps do not resolve the issue, please contact customer support.

Specifications

Warranty Information

For detailed warranty information, please refer to the documentation provided with your product at the time of purchase or contact your retailer. Warranty terms and conditions may vary by region and retailer.

Support

If you require further assistance, have questions about installation, operation, or troubleshooting that are not covered in this manual, please contact InSinkErator customer support or your authorized dealer. Contact details can typically be found on the manufacturer's website or your purchase documentation.