Divoom Onbeat 200 Bluetooth Portable Speaker User Manual

Introduction

Thank you for choosing the Divoom Onbeat 200 Bluetooth Portable Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use to ensure optimal performance and longevity of your device.

The Divoom Onbeat 200 is a compact and powerful portable speaker designed to deliver rich audio with the convenience of Bluetooth wireless connectivity. It features a built-in microphone for hands-free calling, making it versatile for both music playback and communication.

Package Contents

Please check the package for the following items:

• Divoom Onbeat 200 Bluetooth Portable Speaker
• USB Charging Cable
• 3.5mm Audio Cable
• User Manual

If any items are missing or damaged, please contact your retailer for assistance.

Product Overview

The Divoom Onbeat 200 features a sleek design with intuitive controls. Familiarize yourself with the speaker's components before use.

Figure 1: Divoom Onbeat 200 Bluetooth Portable Speaker shown with various compatible smartphones, highlighting its wireless connectivity. The speaker is blue and rectangular with a mesh grille.

The speaker is equipped with dual drivers for stereo sound and a passive radiator for enhanced bass. The control panel typically includes power, volume, and Bluetooth pairing buttons. A built-in microphone is integrated for hands-free communication.

Figure 2: Detailed dimensions of the Divoom Onbeat 200 speaker. The speaker measures approximately 16.5 cm in length, 7 cm in height, and 5.2 cm in depth.

Setup

1. Charging the Speaker

1. Connect the small end of the USB charging cable to the charging port on the speaker.
2. Connect the large end of the USB charging cable to a USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate, typically red, during charging.
4. Once fully charged, the indicator light will change color or turn off (refer to specific LED behavior in the full manual if available). A full charge usually takes 2-3 hours.

Note: For first-time use, ensure the speaker is fully charged.

2. Bluetooth Pairing

1. Ensure the speaker is charged and turned off.
2. Press and hold the Power button (or dedicated Bluetooth button) for a few seconds until you hear an audible prompt or see the Bluetooth indicator light flashing rapidly, indicating it's in pairing mode.
3. On your smartphone, tablet, or other Bluetooth-enabled device, go to the Bluetooth settings.
4. Enable Bluetooth and search for available devices.
5. Select "Onbeat 200" from the list of devices.
6. Once paired, you will hear a confirmation tone, and the Bluetooth indicator light will typically glow solid blue.

Tip: The speaker will automatically attempt to reconnect to the last paired device when powered on, if that device's Bluetooth is active and within range.

Operating Instructions

Power On/Off

• To power on: Press and hold the Power button until the indicator light illuminates.
• To power off: Press and hold the Power button until the indicator light turns off.

Volume Control

• To increase volume: Press the Volume Up (+) button.
• To decrease volume: Press the Volume Down (-) button.

You can also adjust the volume directly from your connected device.

Music Playback

• Play/Pause: Press the Play/Pause button (often integrated with the Power or Bluetooth button).
• Next Track: Double-press the Volume Up (+) button (or a dedicated skip button).
• Previous Track: Double-press the Volume Down (-) button (or a dedicated skip button).

Note: Specific button functions may vary slightly. Refer to the physical markings on your speaker.

Auxiliary Input (AUX)

For devices without Bluetooth, you can use the 3.5mm audio cable:

1. Connect one end of the 3.5mm audio cable to the AUX-in port on the speaker.
2. Connect the other end to the headphone jack of your audio device.
3. The speaker will automatically switch to AUX mode, or you may need to press a mode button.

Making and Receiving Calls

The Divoom Onbeat 200 features a built-in microphone for hands-free calling when connected via Bluetooth to a smartphone.

• Answering a Call: When a call comes in, the music will pause. Press the Play/Pause button (or phone icon button) once to answer the call.
• Ending a Call: During a call, press the Play/Pause button (or phone icon button) once to end the call.
• Rejecting a Call: Press and hold the Play/Pause button (or phone icon button) for approximately 2 seconds to reject an incoming call.
• Redialing Last Number: Double-press the Play/Pause button (or phone icon button) to redial the last number called.

Audio will be routed through the speaker, and your voice will be picked up by the built-in microphone.

Maintenance

• Keep the speaker away from water, moisture, and extreme temperatures.
• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid dropping the speaker or subjecting it to strong impacts.
• When not in use for extended periods, store the speaker in a cool, dry place and charge it periodically to maintain battery health.

Troubleshooting

Specifications

• Model Name: Onbeat 200
• Item Model Number: Onbeat 200-Blue
• Brand: Divoom
• Speaker Type: Bookshelf
• Special Features: Built-in Microphone, Stereo
• Recommended Uses: Music
• Compatible Devices: Smartphone
• Surround Sound Channel Configuration: 2.0
• Color: Blue
• Item Weight: 544 g (1.2 Pounds)
• Is Waterproof: No
• Control Method: App (Note: While listed, primary control is via physical buttons and connected device)
• Wireless Communication Technology: Bluetooth
• Power Source: Battery Powered (1 Lithium Ion battery included)
• Product Dimensions: 16.51 x 5.08 x 7.11 cm
• Speaker Maximum Output Power: 4 Watts
• Connectivity Technology: Bluetooth
• Mounting Type: Tabletop
• First Available: May 17, 2013

Warranty and Support

The Divoom Onbeat 200 comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Divoom website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or service inquiries, please contact Divoom customer support through their official channels. Keep your purchase receipt and product model information handy when contacting support.