SEVERIN SM 3718 Blender User Manual

Introduction

Thank you for choosing the SEVERIN SM 3718 Blender. This manual provides important information on the safe operation, assembly, maintenance, and troubleshooting of your appliance. Please read these instructions carefully before first use and keep them for future reference to ensure optimal performance and safety.

Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions: Before operating the blender, read all instructions thoroughly.
• Electrical Safety: Ensure the voltage indicated on the appliance corresponds to your local mains voltage before connecting. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• Avoid Hot Liquids: DO NOT blend hot liquids. The glass jar is not designed to tolerate hot liquids and may explode, causing severe injury. Allow hot ingredients to cool before blending.
• Blade Safety: The blades are extremely sharp. Handle the blade assembly with extreme care, especially when removing or attaching it, and during cleaning.
• Proper Assembly: The appliance is equipped with a safety cut-out switch. It will only operate when the glass container is correctly and securely engaged in the base unit. Ensure the container is properly locked into place before starting.
• Stability: Always operate the blender on a stable, flat, dry, and non-slip surface. The non-slip rubber feet provide stability.
• Supervision: Close supervision is necessary when any appliance is used by or near children. Keep the appliance and its cord out of reach of children.
• Unplug When Not in Use: Always unplug the blender from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Do Not Overfill: Do not exceed the maximum fill level indicated on the glass container.
• Ventilation: Do not block ventilation openings.
• Intended Use: This appliance is intended for household use only. Do not use it for commercial purposes or for anything other than its intended use.

Product Overview and Components

Familiarize yourself with the parts of your SEVERIN SM 3718 Blender:

• Base Unit: Contains the motor, control knob, and safety interlock.
• Glass Container: Removable 1.5 L capacity glass jar with measurement markings and a pouring spout.
• Blade Assembly: Integrated stainless steel blade unit at the bottom of the glass container.
• Lid: Secure lid for the glass container, with a central filling opening.
• Measuring Cup: Small transparent cup that fits into the lid's central opening, also serving as a stopper.
• Control Knob: Rotary knob on the base unit for selecting speeds and pulse function.

Assembly and Setup

1. Unpack: Carefully unpack all components and remove any packaging materials.
2. Clean: Before first use, wash the glass container, lid, and measuring cup with warm soapy water. Rinse thoroughly and dry. Wipe the base unit with a damp cloth.
3. Assemble Container: Ensure the blade assembly is securely attached to the bottom of the glass container.
4. Place Container on Base: Place the assembled glass container onto the base unit. Rotate it slightly until it clicks into place, ensuring the safety interlock is engaged. The blender will not operate if the container is not correctly seated.
5. Secure Lid: Place the lid firmly onto the glass container. Insert the measuring cup into the lid's central opening.
6. Connect Power: Plug the power cord into a suitable electrical outlet. Ensure the control knob is in the '0' (Off) position before plugging in.

Operating Instructions

1. Prepare Ingredients: Cut ingredients into small pieces (approx. 2-3 cm) to facilitate blending. Add liquids first, then softer ingredients, and finally harder ingredients or ice.
2. Fill Container: Place prepared ingredients into the glass container. Do not exceed the maximum fill line (1.5 L). Remember: Do not use hot liquids.
3. Secure Lid: Place the lid firmly on the container and insert the measuring cup.
4. Select Speed: Turn the control knob to the desired speed setting:
   • 'I' (Speed 1): For softer ingredients and lighter blending tasks.
   • 'II' (Speed 2): For harder ingredients and more intensive blending, reaching up to 20,000 rpm.
5. Pulse Function ('P'): For short bursts of power or to achieve a coarser consistency, turn and hold the knob to the 'P' position. Release to stop. This is ideal for crushing ice or chopping.
6. Blending: Allow the blender to run until the desired consistency is achieved. If ingredients stick to the sides, turn off the blender, unplug it, remove the lid, and use a spatula to push ingredients down. Never use your hands or utensils while the blender is running.
7. Finish Blending: Once blending is complete, turn the control knob back to the '0' (Off) position. Unplug the appliance from the power outlet.
8. Pour: Carefully remove the lid and pour your blended mixture using the convenient pouring spout.

Cleaning and Maintenance

Regular cleaning ensures the longevity and hygiene of your blender.

1. Unplug: Always ensure the blender is unplugged from the power outlet before cleaning.
2. Disassemble: Remove the glass container from the base unit. Carefully detach the lid and measuring cup.
3. Clean Glass Container and Blade: The glass container and blade assembly can be easily cleaned with warm water and dish soap. For stubborn residue, fill the container with warm water and a drop of dish soap, secure the lid, and run the blender on a low speed for a few seconds. Rinse thoroughly. Be extremely careful when handling the sharp blades.
4. Clean Base Unit: Wipe the base unit with a damp cloth. Do not immerse the base unit in water or any other liquid. Do not use abrasive cleaners or scouring pads, as they may damage the surface.
5. Dry: Ensure all parts are completely dry before reassembling or storing the blender.
6. Storage: Store the blender in a dry place. The integrated cable storage helps keep the cord tidy.

Troubleshooting

If you encounter issues with your blender, refer to the following common problems and solutions:

Technical Specifications

Warranty and Customer Support

Your SEVERIN SM 3718 Blender comes with a 2-year warranty from the date of purchase, covering manufacturing defects and material faults. Please retain your proof of purchase for warranty claims.

For technical assistance, spare parts, or warranty inquiries, please contact SEVERIN customer support. You can find contact information on the official Severin Brand Store or through their official website.

Note: Information regarding the availability of spare parts is currently unavailable.