SpeaKa Professional DL-1117 In-Wall/Ceiling Speaker Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SpeaKa Professional DL-1117 In-Wall/Ceiling Speaker. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. Product Overview

The SpeaKa Professional DL-1117 is a high-quality in-wall/ceiling speaker designed for various audio applications in both residential and industrial environments. Its robust metallic construction ensures durability and reliable performance.

Figure 2.1: Front view of the SpeaKa Professional DL-1117 In-Wall/Ceiling Speaker. This image shows the speaker's front grille and mounting frame.

Key Features:

• Ideal for wall and ceiling mounting.
• Suitable for industrial and residential spaces.
• Solid metallic construction for enhanced durability.

3. Specifications

Figure 3.1: Dimensional drawing of the SpeaKa Professional DL-1117 speaker. This diagram illustrates the speaker's diameter (Ø100mm), depth (49mm), and cutout dimensions (Ø74mm, Ø81mm).

Figure 3.2: Back view of the SpeaKa Professional DL-1117 speaker, showing the product label with model number DL-1117BK8, frequency response, power rating, and impedance.

4. Safety Instructions

Please observe the following safety precautions to prevent injury or damage to the product:

• Electrical Safety: Ensure all power to the audio system is disconnected before making any connections or performing installation. Incorrect wiring can cause damage to the speaker or amplifier.
• Installation: Installation should be performed by a qualified professional if you are unsure about electrical wiring or structural integrity. Ensure the mounting surface (wall or ceiling) can safely support the weight of the speaker.
• Environment: Do not expose the speaker to excessive moisture, extreme temperatures, or direct sunlight.
• Cleaning: Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosols.
• Disassembly: Do not attempt to disassemble or modify the speaker. This will void the warranty and may cause damage or injury.

5. Setup and Installation

Follow these steps for proper installation of your in-wall/ceiling speaker:

5.1 Tools Required

• Drill
• Hole saw (matching cutout diameter, approx. Ø74-81mm)
• Screwdriver
• Wire strippers
• Speaker wire (appropriate gauge for your amplifier and cable length)

5.2 Mounting Location

Choose a suitable location in your wall or ceiling. Ensure there are no electrical wires, plumbing, or structural elements behind the chosen area. Use a stud finder if necessary.

5.3 Cutting the Opening

1. Carefully mark the desired cutout diameter on the wall or ceiling. Refer to the dimensions in Figure 3.1.
2. Using a hole saw, carefully cut the opening.

5.4 Wiring

1. Run speaker wire from your amplifier/receiver to the cutout opening.
2. Strip approximately 1/2 inch (12mm) of insulation from the ends of the speaker wire.
3. Connect the speaker wires to the terminals on the back of the DL-1117 speaker. Ensure correct polarity (+ to + and - to -) from the amplifier to the speaker. The terminals are typically screw-type or spring-loaded.

5.5 Installing the Speaker

1. Carefully insert the speaker into the cutout opening.
2. Secure the speaker using the integrated mounting clips or screws, if applicable. For this model, the design suggests it is inserted and then secured from the front.

Figure 5.1: Diagram illustrating the installation process of the SpeaKa Professional DL-1117 speaker into a ceiling opening. The speaker is inserted from below into the pre-cut hole.

6. Operating Instructions

Once the speaker is correctly installed and wired to your amplifier or receiver:

1. Ensure all connections are secure.
2. Turn on your amplifier/receiver.
3. Start playing audio through your connected source.
4. Adjust the volume on your amplifier/receiver to a comfortable listening level. Avoid excessively high volumes that could distort the sound or damage the speaker.

7. Maintenance

The SpeaKa Professional DL-1117 speaker requires minimal maintenance:

• Cleaning: Periodically wipe the speaker grille and frame with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
• Inspection: Occasionally check the speaker for any visible damage or loose connections.

8. Troubleshooting

If you encounter issues with your speaker, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact SpeaKa Professional customer support.

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official SpeaKa Professional website. Keep your proof of purchase for warranty claims.

Manufacturer: SpeaKa Professional

ASIN: B00CS2V1AQ