Introduction
Grip Puppy Comfort Grips are designed to enhance the riding experience on motorcycles, scooters, and ATVs by providing increased comfort and reducing handlebar vibration. These over-grips fit over standard round-type cycle grips, offering a larger diameter and a softer feel. This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting.
Setup: Installation Instructions
Proper installation ensures optimal performance and longevity of your Grip Puppy Comfort Grips. Follow these steps carefully:
- Preparation: Ensure your existing grips are clean and free from debris. Gather a small amount of dilute soapy water (e.g., dish soap and water) or a water-based lubricant.
- Lubrication: Apply a generous amount of dilute soapy water or lubricant to the inside of the Grip Puppy and over your existing handlebar grip. This will reduce friction during installation.
- Sliding On: Carefully slide the Grip Puppy over your standard grip. This may require some effort. Twist and push the grip on gradually. For stubborn installations, an air compressor with a narrow nozzle can be used to create an air cushion, allowing the grip to slide on more easily.
- Trimming (Optional): If the Grip Puppy is slightly longer than your existing grip, it can be trimmed to length using a sharp utility knife or razor blade. For a clean cut, insert a socket or a similar round object inside the grip at the desired cut point and cut along its edge.
- Throttle Side Adjustment: On the throttle side, ensure that the Grip Puppy does not interfere with the free movement of the throttle. After installation, verify that the throttle snaps back to the closed position without obstruction. Adjust the grip position slightly if necessary to ensure proper clearance.
- Drying: Allow the soapy water or lubricant to dry completely before riding. This ensures the grips are securely seated and do not rotate during use.
Image: Applying dilute soapy water to the Grip Puppy for easier installation.
Image: Grip Puppy installed over a standard handlebar grip, highlighting increased comfort and reduced vibration.
Operating Instructions
Once installed, Grip Puppy Comfort Grips are ready for immediate use. They are designed to provide the following benefits:
- Superior Comfort: The high-quality, soft foam material significantly reduces vibration and hand fatigue, leading to a more comfortable riding experience, especially on long journeys.
- Enhanced Grip: The textured surface offers exceptional grip and control, contributing to improved riding safety.
- Vibration Reduction: The foam construction helps to dampen vibrations transmitted from the engine and road, reducing numbness and discomfort in the hands.
- Heated Grip Compatibility: Grip Puppy Comfort Grips are compatible with heated grips and will allow heat to transfer through, maintaining the functionality of your heated system.
Image: A rider on a motorcycle demonstrating the use of Grip Puppy Comfort Grips.
Maintenance
Grip Puppy Comfort Grips are made from durable technical foam designed for longevity. To maintain their condition and performance:
- Cleaning: Clean the grips periodically with mild soap and water. Avoid harsh chemicals or abrasive cleaners, which can damage the foam material.
- Inspection: Regularly inspect the grips for any signs of wear, tear, or damage. While durable, extreme conditions or prolonged use may eventually lead to degradation.
- Storage: If storing your vehicle for an extended period, ensure the grips are clean and dry.
Troubleshooting
Here are solutions to common issues you might encounter:
- Grips are difficult to install: Ensure sufficient lubrication with dilute soapy water or water-based lubricant. Applying firm, consistent pressure while twisting can help. An air compressor can also assist by creating an air cushion.
- Throttle sticks or does not return freely: This indicates the Grip Puppy is interfering with the throttle mechanism. Slightly reposition or trim the grip to ensure adequate clearance for full and free throttle movement.
- Grips rotate after installation: This usually means the lubricant has not fully dried. Allow more time for the soapy water to evaporate and the grips to adhere firmly to the underlying surface. Avoid riding until they are secure.
- Grips do not fit my specific model: While Grip Puppy grips are designed for universal fit over most standard grips, some specific motorcycle models may have non-standard grip dimensions. Verify your handlebar grip diameter against the product specifications.
Specifications
| Feature | Detail |
|---|---|
| Brand | Grip Puppy |
| Model Name | FBA_91424 |
| Material | Technical Foam Product, Stable, Closed Cell |
| Color | Black |
| Product Dimensions (L x W) | 6"L x 1.45"W (approximate) |
| Item Weight | 41 Grams |
| Vehicle Service Type | ATV, Scooter, Motorcycle |
Image: Diagram illustrating the approximate dimensions of the Grip Puppy Comfort Grips.
Warranty Information
Grip Puppy Comfort Grips come with a 3-year warranty. For specific details regarding warranty coverage and claims, please refer to the official Grip Puppy website or contact customer support.
Image: Packaging of Grip Puppy Comfort Grips, indicating a 3-year warranty.
Support
For further assistance, product information, or to provide feedback, please visit the official Grip Puppy website:
