JERDON HL75ND Wall-Mounted LED Makeup Mirror Instruction Manual

Introduction

Thank you for choosing the JERDON HL75ND Wall-Mounted LED Makeup Mirror. This mirror is designed to provide clear, magnified reflection with integrated LED lighting, ideal for detailed grooming and makeup application. Its direct-wire installation ensures a clean, integrated look in your bathroom or dressing area. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image: The JERDON HL75ND Wall-Mounted LED Makeup Mirror, showcasing its nickel finish and illuminated mirror face.

Important Safety Information

WARNING: This mirror requires professional installation by a licensed electrician. Incorrect installation can cause electrical shock or fire. Always turn off the power at the circuit breaker before installing or removing the mirror.

• Ensure all local electrical codes are followed during installation.
• The extendable arm can cause injury if not used carefully. Avoid sudden movements or excessive force.
• Keep children and pets away from the mirror when in use to prevent accidental injury.
• Do not attempt to modify the electrical components of the mirror.
• Disconnect power before cleaning or performing any maintenance.

Product Features

• Wall-Mounted Design: Saves counter space with a 13.5-inch extendable arm.
• Direct Wire Installation: Provides a seamless, integrated look without exposed cords.
• LED Lighting: Bright, long-lasting LED bulbs for optimal illumination during use.
• Dual Magnification: Features 1X and 8X magnification for versatile use, from general viewing to detailed tasks.
• 360-Degree Swivel: The two-sided mirror swivels for easy transition between magnification levels.
• Durable Construction: Quality design with scratch-resistant finishes and robust hardware.

Image: The mirror head swivels 360 degrees, allowing easy access to both 1X and 8X magnification sides.

Image: The mirror features an 8.5-inch diameter, providing a generous viewing area with integrated LED lighting.

Installation Instructions

Due to the direct-wire nature of this product, professional installation by a licensed electrician is strongly recommended to ensure safety and compliance with electrical codes.

Pre-Installation Checklist:

• Verify that the installation location has a junction box with a live wire.
• Ensure the electrical box is installed in a horizontal orientation, as required for the mounting plate.
• Gather necessary tools: screwdriver, wire strippers, electrical tape, mounting hardware (included).
• Turn off power to the circuit at the main breaker before beginning any work.

Mounting the Mirror:

1. Carefully unpack all components and inspect for any damage.
2. Attach the mounting plate to the horizontally oriented electrical junction box using the provided screws. Ensure it is securely fastened.
3. Position the mirror's base over the mounting plate.

Wiring:

1. Connect the mirror's electrical wires to the corresponding house wires (typically black to black, white to white, and ground to ground).
2. Secure connections with wire nuts and electrical tape.
3. Carefully tuck all wires into the junction box.

Final Assembly:

1. Align the mirror's base with the mounting plate and secure it with the provided screws.
2. Ensure the mirror is firmly attached to the wall.
3. Restore power at the circuit breaker and test the mirror's light function.

Image: The JERDON HL75ND mirror seamlessly installed on a bathroom wall, demonstrating its space-saving design.

Operating Instructions

• Turning On/Off the Light: Locate the switch on the mirror's base or arm. Flip the switch to turn the LED light on or off. Note that this model features a single brightness level.
• Using Magnification: The mirror has two sides. Gently swivel the mirror head 360 degrees to switch between the 1X (true image) and 8X (magnified) sides.
• Adjusting Position: The extendable arm allows you to pull the mirror closer or push it back against the wall. The mirror head can also be tilted up or down to achieve the desired viewing angle.

Maintenance

• Cleaning: To clean the mirror surface, use a soft, lint-free cloth and a non-abrasive glass cleaner. Do not spray cleaner directly onto the mirror; apply it to the cloth first.
• Frame Cleaning: Wipe the nickel finish with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Bulb Replacement: While the LED bulbs are long-lasting, if replacement is ever needed, ensure power is off at the circuit breaker. Consult a qualified electrician for assistance if you are unsure.

Troubleshooting

Specifications

Warranty and Support

JERDON products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official JERDON website. For technical support, replacement parts, or any inquiries, please contact JERDON customer service.

You can find more information and contact details on the JERDON Store on Amazon.