1. Introduction
The Apogee ONE is a high-quality audio interface and microphone designed for professional audio recording and playback with Apple iPad and Mac devices. It features advanced digital-to-analog and analog-to-digital conversion, ensuring pristine audio quality for your recordings and monitoring. Its compact design makes it ideal for mobile and studio use.
Key features include:
- Studio-quality audio interface and microphone for iPad and Mac.
- USB 2.0 audio with 24-bit/96kHz A/D and D/A conversion.
- Direct digital connection to iPod touch, iPhone, and iPad.
- Low latency monitoring for real-time audio feedback.
- Complete input/output control via Apogee's Maestro software (available for iOS and Mac).
- Built-in omnidirectional condenser microphone with included mic stand adapter.
2. Setup
This section guides you through the initial setup of your Apogee ONE device.
2.1 System Requirements
- iOS Devices: iPhone 4 or later, iPad 2 (2nd Generation) or later, iPod touch (4th Generation) or later. Requires iOS 5.1 or later.
- Mac Computers: Requires Mac OS X v10.7.5 or later.
- Software: Apogee Maestro software (downloadable from Apogee's official website).
2.2 Connecting the Apogee ONE
Follow these steps to connect your Apogee ONE to your device:
- Power Connection: Connect the included power supply to the Apogee ONE and an electrical outlet.
- Device Connection:
- For Mac: Use the provided USB cable to connect the Apogee ONE to an available USB port on your Mac.
- For iOS Devices: Use the appropriate Apogee iOS cable (sold separately or included with specific bundles) to connect the Apogee ONE to your iPad, iPhone, or iPod touch.
- Software Installation: Download and install the latest version of Apogee Maestro software from the official Apogee website. This software is essential for controlling the ONE's settings, inputs, and outputs.
- Audio Connections:
- Headphones: Connect your headphones to the 3.5mm headphone jack on the Apogee ONE.
- External Microphone/Instrument: If using an external microphone or instrument, connect it to the breakout cable's XLR (for mic) or 1/4-inch (for instrument) input.
Figure 2.2.1: Front view of the Apogee ONE Audio Interface, showing the main control knob, LED indicators, and headphone jack.
Figure 2.2.2: Apogee ONE Audio Interface connected to its breakout cable, illustrating the XLR and 1/4-inch inputs for external microphones and instruments.
3. Operating Instructions
This section provides guidance on operating your Apogee ONE for audio recording and playback.
3.1 Using the Built-in Microphone
The Apogee ONE features a high-quality omnidirectional condenser microphone. To use it:
- Ensure the Apogee ONE is connected and powered on.
- Open your digital audio workstation (DAW) or recording application on your Mac or iOS device.
- In your DAW's audio settings, select "Apogee ONE" as the input device.
- Adjust the input gain using the main control knob on the Apogee ONE or through the Apogee Maestro software to achieve an optimal recording level without clipping.
- Position the Apogee ONE appropriately for the sound source you wish to record. A mic stand adapter is included for flexible placement.
3.2 Using External Inputs
The breakout cable allows connection of an external microphone (XLR) or instrument (1/4-inch).
- Connect your external microphone to the XLR input or your instrument to the 1/4-inch input on the breakout cable.
- In Apogee Maestro software, select the appropriate input source (e.g., "External Mic" or "Instrument").
- Adjust the input gain for the external source using the Apogee ONE's control knob or Maestro software.
3.3 Monitoring and Playback
The Apogee ONE provides low-latency monitoring for accurate audio feedback during recording and high-quality playback.
- Connect headphones to the 3.5mm headphone jack.
- Adjust headphone volume using the main control knob or Maestro software.
- Ensure "Apogee ONE" is selected as the output device in your system's audio settings or DAW.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Apogee ONE.
- Cleaning: Use a soft, dry, lint-free cloth to clean the exterior of the device. Do not use liquid cleaners, aerosols, or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, disconnect all cables.
- Handling: Avoid dropping or subjecting the device to strong impacts. Do not attempt to open the casing, as this will void the warranty.
- Cable Care: Handle cables by the connectors, not the wires, to prevent damage. Avoid sharp bends or kinks in the cables.
5. Troubleshooting
This section addresses common issues you might encounter with your Apogee ONE.
5.1 No Sound Output/Input
- Check Connections: Ensure all cables (USB, power, headphones, external mic/instrument) are securely connected.
- Power On: Verify that the Apogee ONE is powered on and its indicator lights are active.
- Software Settings:
- In your Mac's System Preferences (Sound) or iOS device's audio settings, confirm that "Apogee ONE" is selected as the input and output device.
- Within your DAW or recording application, ensure "Apogee ONE" is chosen as the audio interface.
- Check input/output levels in Apogee Maestro software and your DAW. Ensure they are not muted or set too low.
- Volume Levels: Increase the volume on the Apogee ONE, your headphones, and your computer/device.
5.2 Device Not Recognized
- Restart: Disconnect the Apogee ONE, restart your Mac or iOS device, then reconnect the Apogee ONE.
- USB Port: Try connecting to a different USB port on your Mac.
- Cable Integrity: Inspect the USB cable for any signs of damage. Try a different USB cable if available.
- Software/Drivers: Ensure you have the latest Apogee Maestro software and drivers installed. Visit the Apogee support website for updates.
5.3 Audio Distortion or Noise
- Gain Staging: Reduce input gain if the signal is clipping (indicated by red LEDs). Ensure your recording levels are healthy but not exceeding 0 dBFS.
- Cable Quality: Use high-quality, shielded audio cables for external microphones and instruments.
- Ground Loop: If you hear a hum, it might be a ground loop. Try connecting all audio equipment to the same power strip or using a ground loop isolator.
- Sample Rate/Buffer Size: In your DAW or Maestro software, try adjusting the sample rate and buffer size. A larger buffer size can reduce pops and clicks but increases latency.
6. Specifications
Detailed technical specifications for the Apogee ONE Audio Interface.
| Feature | Specification |
|---|---|
| Model Number | ONE-IOS-MAC |
| Item Weight | 8 ounces (approx. 227 grams) |
| Product Dimensions | 6.4 x 2.25 x 0.75 inches (approx. 16.26 x 5.72 x 1.91 cm) |
| Hardware Interface | USB 2.0 |
| Connectivity Technology | USB |
| Number of Channels | 2 (e.g., built-in mic + external input) |
| A/D and D/A Conversion | 24-bit/96kHz |
| Compatible Devices | Tablet, Personal Computer, Laptop (specifically Apple iPad, iPhone, iPod touch, Mac) |
| Operating System | iOS (5.1 or later), macOS (OS X v10.7.5 or later) |
| Supported Software | Apple iOS, Apple macOS, USB audio compatible software (e.g., DAWs) |
| Built-in Microphone | Omnidirectional Condenser |
7. Warranty Information
Specific warranty details for the Apogee ONE Audio Interface are provided by the manufacturer at the time of purchase. This manual does not contain the full terms and conditions of the product warranty.
For detailed warranty information, including coverage period and terms, please refer to the documentation included with your product or visit the official Apogee Electronics website.
8. Support
For further assistance, technical support, driver downloads, software updates, and frequently asked questions, please visit the official Apogee Electronics support website:
https://apogeedigital.com/support
You may also find helpful resources and community forums on their website.
