Introduction
This instruction manual provides essential information for the operation, maintenance, and troubleshooting of the Massey Harris 44 Special and Diesel Deluxe tractors. It is designed to assist owners and operators in understanding their machinery, ensuring safe and efficient use, and prolonging the lifespan of the equipment. Please read this manual thoroughly before attempting any operation or maintenance procedures.
Image showing the cover of the Massey Harris 44 Special Diesel Deluxe Tractor Manual Kit.
Safety Information
Always prioritize safety when operating or maintaining your tractor. Familiarize yourself with all safety decals on the machine and follow all recommended safety procedures. Failure to do so can result in serious injury or death.
- Read and understand the entire manual before operation.
- Ensure all guards and safety devices are in place and functioning correctly.
- Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and sturdy footwear.
- Never allow unauthorized personnel to operate the tractor.
- Perform daily pre-operation checks as outlined in the maintenance section.
Setup
Proper setup is crucial for the safe and efficient operation of your Massey Harris tractor. This section outlines general steps for preparing the tractor for use. Refer to the specific sections within your manual kit for detailed instructions pertaining to your model.
- Initial Inspection: Before starting, conduct a thorough visual inspection of the tractor. Check for any loose parts, leaks, or damage.
- Fluid Levels: Verify engine oil, coolant, hydraulic fluid, and fuel levels are within the recommended ranges. Top up as necessary using the correct type of fluids.
- Tire Pressure: Ensure tires are inflated to the manufacturer's specified pressure for optimal performance and stability.
- Battery Check: Inspect battery terminals for corrosion and ensure connections are secure.
- Attachment Connection: If attaching implements, ensure they are correctly and securely mounted according to the implement's and tractor's instructions.
Operating Instructions
Operating your Massey Harris tractor requires attention to detail and adherence to safety guidelines. This section provides general operating principles. Consult your specific manual for detailed starting, driving, and stopping procedures.
- Starting the Engine: Follow the specific starting sequence for your model, typically involving checking controls, engaging the clutch, and turning the ignition.
- Driving: Operate the tractor at a safe speed, especially on uneven terrain or when turning. Be aware of your surroundings and any attached implements.
- PTO Operation: When using the Power Take-Off (PTO), ensure all personnel are clear of rotating parts. Engage and disengage the PTO smoothly.
- Hydraulic System: Understand the controls for the hydraulic system to safely raise, lower, and position implements.
- Stopping and Parking: Bring the tractor to a complete stop, engage the parking brake, lower all implements to the ground, and turn off the engine. Remove the key.
Maintenance
Regular maintenance is essential for the longevity and reliable performance of your Massey Harris tractor. Adhere to the maintenance schedule provided in your manual kit.
| Interval | Task |
|---|---|
| Daily/Every 10 Hours | Check fluid levels (engine oil, coolant, fuel), inspect tires, clean air intake screen. |
| Every 50 Hours | Lubricate grease points, check battery electrolyte level, inspect fan belt tension. |
| Every 200 Hours | Change engine oil and filter, replace fuel filter, inspect hydraulic system. |
| Annually/Every 500 Hours | Replace air filter, check valve clearances, inspect brakes, change hydraulic fluid and filter. |
Always use genuine Massey Harris or equivalent quality replacement parts and lubricants.
Troubleshooting
This section provides a general guide to common issues you might encounter with your Massey Harris tractor. For detailed troubleshooting steps, refer to the specific section in your manual kit.
- Engine Fails to Start:
- Check fuel level.
- Ensure battery is charged and connections are clean and tight.
- Verify ignition switch is in the correct position.
- Check for clogged fuel filters or lines.
- Loss of Power:
- Inspect air filter for clogging.
- Check fuel quality and flow.
- Ensure engine is not overheating (check coolant level and radiator).
- Hydraulic System Malfunction:
- Check hydraulic fluid level.
- Inspect for leaks in hydraulic lines or cylinders.
- Ensure PTO is engaged if required for hydraulic function.
If you are unable to resolve an issue, contact a qualified service technician.
Specifications (Manual Kit)
The following specifications pertain to the Massey Harris 44 Special, Diesel Deluxe Tractor Manual Kit itself, not the tractor.
- Manufacturer: Massey Harris (as listed for the manual content)
- Part Number: MH44Skit2
- Item Weight: 1.7 pounds
- Product Dimensions: 12 x 10 x 3 inches
- Item Model Number: 44
- ASIN: B00CMW9ANC
- Date First Available: September 23, 2017
For detailed specifications of the Massey Harris 44 Special or Diesel Deluxe tractor, please refer to the specific sections within the manual kit.
Warranty and Support
Information regarding the warranty for the Massey Harris 44 Special or Diesel Deluxe tractor, or for the manual kit itself, is typically provided by the original manufacturer or the seller at the time of purchase. Please refer to your purchase documentation or contact Jensales directly for specific warranty terms and support options.
For technical support related to the content of this manual kit, please contact Jensales customer service.
