Comfort Glow Tabletop Electric Infrared Quartz Heater

1. Introduction

Thank you for purchasing the Comfort Glow QDE1320 Tabletop Electric Infrared Quartz Heater. This manual provides essential information for the safe and efficient operation of your new heater. Please read all instructions carefully before use and retain this manual for future reference.

This compact, high-performance infrared quartz heater is designed to provide efficient warmth in indoor spaces up to 1,000 square feet. It features powerful 5,120 BTUs, dual quartz heating elements, a digital LED display, touchpad controls, and a multi-function remote control.

2. Important Safety Information

WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire, or serious injury.

• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater or return to authorized service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to off, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug into a grounded outlet.
• Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. Package Contents

• Comfort Glow QDE1320 Infrared Quartz Heater
• Multi-function Remote Control
• User Manual

4. Setup

The Comfort Glow QDE1320 heater requires no assembly. Simply place the unit on a stable, flat surface in the desired indoor location, ensuring adequate clearance from combustible materials (at least 3 feet from the front, sides, and rear).

Plug the grounded safety plug directly into a 120V, 12.5A (minimum) grounded wall outlet. Do not use extension cords or power strips.

Figure 1: Comfort Glow QDE1320 Infrared Quartz Heater. This image shows the main unit with its digital display and a remote control.

5. Operating Instructions

Your Comfort Glow heater can be operated using the touchpad control panel on the unit or the multi-function remote control.

5.1 Power On/Off

• Press the Power button on the control panel or remote to turn the heater ON or OFF.

5.2 Heat Settings

The heater offers three heat settings:

• ECO Mode: Energy-saving mode that automatically adjusts heat output to maintain a comfortable temperature while minimizing power consumption.
• Low (1000W): Provides moderate heat output.
• High (1500W): Delivers maximum heat output for faster warming.

Use the Mode button on the control panel or remote to cycle through the available heat settings.

5.3 Adjustable Thermostat

The adjustable thermostat allows you to set your desired room temperature.

• Use the Up/Down arrows on the control panel or remote to increase or decrease the target temperature. The digital LED display will show the set temperature.

5.4 12-Hour Programmable Timer

Set the heater to operate for a specific duration using the timer function.

• Press the Timer button on the control panel or remote to activate the timer. Each press will increase the operating time in 1-hour increments, up to 12 hours.
• The heater will automatically turn off once the set time has elapsed.

Figure 2: Digital LED Display and Touchpad Control Panel. This image highlights the user interface for adjusting settings.

6. Key Features

• Efficient Indoor Heat: Heats spaces up to 1,000 sq ft.
• Powerful 5,120 BTU Output: Delivers high-output warmth with 1500 W / 120 V / 12.5 A.
• 3 Heat Settings: ECO, Low (1,000W), or High (1,500W).
• Energy-Saving ECO Mode: Reduces total energy use.
• Digital Display & Thermostat: LED display and adjustable thermostat for precise temperature control.
• Remote Control Convenience: Multi-function remote with 12-hour timer.
• Safety Shut-Off Features: Overheat protection and tip-over shut-off for worry-free use.
• Durable Cool-Touch Cabinet: Safe-to-touch polymer casing.
• Washable Air Filter: Built-in washable air filter for clean air and efficient operation.
• High-Volume Fan: Ensures even distribution of warmth.
• Quiet Operation: Comfortable addition to your daily routine without disruptive noise.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your heater.

7.1 Cleaning the Air Filter

• Ensure the heater is turned OFF and unplugged before cleaning.
• Locate the washable air filter (refer to product diagram if needed).
• Gently remove the filter.
• Wash the filter with warm, soapy water. Rinse thoroughly and allow it to air dry completely before reinserting.
• Regularly cleaning the filter helps maintain air quality and heater efficiency.

7.2 General Cleaning

• Wipe the exterior of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Ensure no water enters the interior of the heater.

8. Troubleshooting

If your heater is not operating correctly, please refer to the following common issues and solutions:

9. Specifications

Figure 3: Approximate dimensions of the Comfort Glow QDE1320 heater.

10. Warranty and Support

For warranty information, technical support, or customer service, please refer to the product packaging or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.