1. Introduction
Thank you for choosing the Simple Designs LT3018-BLK Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before assembly and operation, and retain them for future reference.
The Simple Designs LT3018-BLK is a stylish table lamp featuring a black painted metal base, a matching fabric shade, and decorative hanging acrylic beads. It is designed to provide ambient lighting for various indoor settings.
2. Safety Instructions
- Indoor Use Only: This lamp is designed for indoor use in dry locations. Do not expose to water or moisture.
- Electrical Safety: Always unplug the lamp from the power outlet before cleaning, changing the bulb, or performing any maintenance.
- Bulb Requirements: Use only one (1) Type B Candelabra Base bulb (E12 socket) with a maximum wattage of 40W equivalent. Do not exceed the recommended wattage to prevent overheating and potential fire hazards. Bulb is not included.
- Stable Placement: Ensure the lamp is placed on a stable, flat surface to prevent tipping.
- Cord Care: Do not place the power cord near heat sources. Avoid placing heavy objects on the cord or running it under carpets.
3. Package Contents
Verify that all components are present before beginning assembly:
- Lamp Base (Black Metal)
- Fabric Shade (Black)
- Hanging Acrylic Beads (Pre-attached or separate, refer to packaging)
Note: Light bulb is not included.
4. Setup and Assembly
Follow these steps to assemble your Simple Designs table lamp:
- Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, flat surface.
- Attach Shade: If the fabric shade is separate, gently place it onto the lamp's socket assembly. Secure it with the provided shade ring by screwing it onto the socket until snug.
- Install Bulb: Screw one (1) E12 Candelabra Base bulb (max 40W equivalent, not included) into the lamp socket. Ensure the bulb is fully seated but do not overtighten.
- Position Beads: If the acrylic beads are separate, carefully attach them to the designated loops around the socket assembly under the shade.
- Place Lamp: Position the lamp on a stable, level surface.
- Connect to Power: Plug the lamp's power cord into a standard 120V AC wall outlet.
Image 1: Fully assembled Simple Designs LT3018-BLK Table Lamp.
Image 2: Close-up view of the hanging acrylic beads and bulb socket area.
5. Operating Instructions
To operate your table lamp:
- Power On/Off: Locate the in-line switch on the power cord. Toggle the switch to turn the lamp on or off.
Video 1: Product Overview of the Simple Designs LT3018 Table Lamp, demonstrating its features and appearance. This video is provided by the manufacturer, All The Rages.
6. Maintenance
- Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe the lamp base and shade. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new E12 Candelabra Base bulb (max 40W equivalent).
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | No power to outlet, bulb loose or burnt out, switch off | Check wall outlet with another device, ensure plug is fully inserted, tighten or replace bulb, ensure in-line switch is in 'on' position. |
| Light flickers | Bulb loose, incorrect bulb type/wattage, faulty bulb | Tighten bulb, ensure correct E12 40W max bulb is used, replace bulb. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | LT3018-BLK |
| Product Dimensions | 5.5"D x 5.5"W x 17.25"H |
| Item Weight | 1.1 Pounds |
| Base Material | Metal |
| Shade Material | Fabric |
| Bulb Base | E12 (Candelabra Base) |
| Max Wattage | 40 Watts (equivalent) |
| Switch Type | In Line |
| Indoor/Outdoor Usage | Indoor |
| Certification | ETL |
Image 3: Diagram illustrating the dimensions of the table lamp.
9. Warranty Information
This product comes with a 1-year warranty against manufacturer defects. Please retain your proof of purchase for warranty claims. For specific warranty details or to initiate a claim, please contact the retailer or manufacturer directly.
10. Customer Support
If you encounter any issues or have questions regarding your Simple Designs LT3018-BLK Table Lamp that are not covered in this manual, please contact the retailer where you purchased the product or refer to the manufacturer's official website for support.
