UNIVERSAL REMOTE MX890

Download PDF
Contents

URC MX-890 Remote Control User Manual

Model: MX890

Introduction

The URC MX-890 Remote Control is a sophisticated universal remote designed to consolidate control of your home entertainment system. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MX-890 remote.

Key Features

  • Customization Capability: Control up to 200 devices with up to 10 pages each, totaling 2000 customizable pages.
  • Rechargeable Battery: Includes a Lithium Ion rechargeable battery for extended use.
  • Learning Capability: Supports standard frequencies (15kHz to 460kHz) for learning commands from other remotes.
  • Ergonomic Design: Engineered for comfortable and intuitive handling.

Setup

Before using your URC MX-890, ensure it is properly set up and charged.

1. Initial Charging

Place the MX-890 remote into its charging cradle. Ensure the remote is seated correctly and the charging indicator light illuminates. Allow the remote to charge fully before first use. A full charge typically takes several hours.

URC MX-890 Remote Control in its charging cradle

Image: The URC MX-890 remote control resting in its black charging cradle, with the product box visible in the background.

2. Programming the Remote

The URC MX-890 is a highly customizable remote. Programming typically requires specialized software and may be performed by a professional installer. Refer to the URC Complete Control software documentation for detailed programming instructions. The remote supports learning commands from existing infrared (IR) devices.

Front view of the URC MX-890 Remote Control

Image: A close-up front view of the URC MX-890 remote control, showcasing its screen and button layout.

Operating the MX-890

Once programmed, the MX-890 provides intuitive control over your devices.

Navigating the Interface

The remote features a color LCD display that shows device menus and activities. Use the navigation buttons (up, down, left, right, and SEL for select) to move through options on the screen. Dedicated hard buttons provide quick access to common functions.

Common Functions

  • Power Buttons: Separate power buttons for system and individual devices are located at the top.
  • Volume Control: Use the VOL+ and VOL- buttons to adjust audio volume. The MUTE button silences audio.
  • Channel Control: Use CH+ and CH- to change channels.
  • Playback Controls: Dedicated buttons for PLAY, PAUSE, STOP, REW (rewind), FWD (fast forward), SKIP+, and SKIP- are provided for media playback.
  • Numeric Keypad: A standard numeric keypad allows for direct channel entry and other numerical inputs.

Maintenance

Battery Care

To maximize the lifespan of your Lithium Ion battery, regularly place the remote in its charging cradle when not in use. Avoid completely draining the battery frequently. If the remote will not be used for an extended period, ensure it is fully charged before storage and periodically recharge it.

Cleaning

Clean the remote with a soft, dry cloth. For stubborn smudges, a slightly damp cloth can be used, but ensure no moisture enters the remote's openings. Do not use harsh chemicals or abrasive cleaners.

Troubleshooting

If you encounter issues with your URC MX-890, try the following steps:

  • Remote Not Responding:
    • Ensure the battery is charged. Place the remote on its charging cradle for at least 30 minutes.
    • Verify that the remote's IR emitter or RF signal is not obstructed.
    • Check if the correct device or activity is selected on the remote's screen.
  • Commands Not Working for a Specific Device:
    • Confirm the remote is pointed directly at the device's IR receiver.
    • If using RF, ensure the RF base station is properly connected and within range.
    • The device may need to be re-programmed. This often requires the URC Complete Control software.
  • Battery Not Holding Charge:
    • Ensure the charging cradle is connected to power and the remote is seated correctly.
    • If the battery life has significantly diminished, it may need replacement. Contact URC support or a certified dealer.
  • Programming Issues:

    The URC MX-890 requires proprietary software for advanced programming and customization. This software is typically provided to authorized dealers and installers. If you are experiencing programming difficulties, it is recommended to contact a professional URC dealer for assistance. Attempting to program without the correct software or expertise may lead to unexpected behavior.

Specifications

FeatureDetail
Product Dimensions1.97 x 1.02 x 8.46 inches
Item Weight6 ounces
Model NumberMX890
Batteries1 Lithium Ion battery required (included)
Max Number of Supported Devices200
Compatible DevicesURC Complete Control© systems
ColorBLACK

Warranty and Support

For information regarding the warranty of your URC MX-890 Remote Control, please refer to the documentation provided at the time of purchase or visit the official UNIVERSAL REMOTE website. For technical support, troubleshooting beyond this manual, or service, contact your authorized URC dealer or UNIVERSAL REMOTE customer service.

Official Website: www.universalremote.com

© 2024 UNIVERSAL REMOTE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.