Futaba Gyro Mounting Pads (10) Instruction Manual

Introduction

These Futaba Gyro Mounting Pads are designed to securely attach gyroscopes to your remote-controlled models. The pads provide a stable mounting surface and help to dampen vibrations, which is crucial for optimal gyro performance and flight stability. This package contains 10 individual mounting pads.

Setup and Installation

1. Surface Preparation: Ensure the mounting surface on your model and the bottom of the gyroscope are clean, dry, and free from dust, oil, or grease. A clean surface is essential for proper adhesive bonding.
2. Pad Application: Carefully peel one side of the protective backing from a mounting pad. Align the pad with the desired mounting location on your model or the gyro, then press firmly to ensure good adhesion.
3. Gyro Attachment: Peel the remaining protective backing from the exposed side of the mounting pad. Carefully place the gyroscope onto the pad, ensuring it is correctly oriented according to your gyro's instructions. Press the gyro firmly onto the pad for several seconds to establish a strong bond.
4. Secure Placement: Verify that the gyro is securely attached and does not move or vibrate excessively. Proper installation minimizes external interference with the gyro's sensors.

Image Description: This image displays ten individual Futaba Gyro Mounting Pads. Each pad is square, white, and features a protective backing with 'NITTO No. 500' printed on it, indicating the adhesive type. These pads are designed to securely attach gyros to RC models, providing vibration dampening.

Operating Considerations

While these pads do not have an 'operating' function in the traditional sense, their proper application is critical for the optimal operation of your gyro. Ensure the pads are always clean and firmly attached to prevent any movement or vibration that could negatively impact gyro performance. A stable gyro mounting directly contributes to the stability and control of your RC model.

Maintenance

• Regular Inspection: Periodically inspect the mounting pads for any signs of wear, detachment, or degradation. Check if the gyro remains firmly attached to the model.
• Replacement: If a pad shows signs of reduced adhesion, damage, or if the gyro feels loose, replace the affected pad immediately with a new one to maintain optimal performance and safety.
• Storage: Store unused pads in a cool, dry place away from direct sunlight to preserve their adhesive properties.

Troubleshooting

• Gyro Vibration: If your gyro exhibits excessive vibration, first check the mounting pads. Ensure they are securely attached and not worn. Replace any compromised pads. Also, verify that the mounting surface is clean and flat.
• Pad Detachment: If a pad detaches, it is likely due to improper surface preparation (e.g., dirt, oil) or insufficient pressure during application. Clean both surfaces thoroughly and apply a new pad with firm, sustained pressure.

Specifications

Warranty and Support

Specific warranty information for the Futaba Gyro Mounting Pads (FUTQ1001) is not provided in the product details. For warranty claims, technical support, or further assistance, please contact the manufacturer, Hobbico, or your authorized Futaba dealer directly. Keep your purchase receipt as proof of purchase.