1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your STRONG SRT ANT 45 ECO Digital Active DVB-T/T2 Outdoor Antenna. This antenna is designed for optimal reception of digital terrestrial television (DVB-T/T2) signals, featuring an integrated FM signal filter and an LTE filter to minimize interference. It is HDTV ready, supports both UHF and VHF frequencies, and is built to be waterproof and UV resistant for outdoor durability.
Figure 1.1: Front view of the STRONG SRT ANT 45 ECO Outdoor Antenna.
2. Safety Information
Please read all safety instructions carefully before installing or operating the antenna. Failure to do so may result in injury or damage to the product.
- Installation Safety: Always exercise caution when working at heights. Ensure the mounting location is stable and secure. Avoid installing near power lines or other electrical hazards.
- Weather Conditions: Do not install or adjust the antenna during thunderstorms or strong winds.
- Power Supply: Use only the provided power adapter. Ensure the power supply is disconnected before making any connections.
- Water Resistance: While the antenna is waterproof, ensure all cable connections are properly sealed to prevent water ingress into the coaxial cable or connected devices.
- Children: Keep packaging materials and small parts away from children.
3. Package Contents
Carefully unpack the box and ensure all items listed below are present and undamaged. If any items are missing or damaged, please contact your retailer.
Figure 3.1: Included components and accessories.
- STRONG SRT ANT 45 ECO Outdoor Antenna
- Mounting bracket and hardware (screws, wall plugs, U-bolt for pole mounting)
- Power inserter / Amplifier unit
- Power adapter (DC 12V)
- Coaxial cable (approx. 3 meters)
- Instruction Manual
4. Setup and Installation
The SRT ANT 45 ECO antenna is designed for outdoor use and can be mounted on a wall or a pole. Choose a location that provides a clear line of sight to the broadcasting tower, free from obstructions like buildings or trees.
4.1. Choosing a Location
Identify the direction of your local DVB-T/T2 broadcasting tower. Online resources or local TV station websites can provide this information. The antenna should be mounted as high as possible and away from large metal objects that could interfere with the signal.
4.2. Mounting the Antenna
The antenna can be mounted using the provided wall mount or pole mount hardware.
- Wall Mounting:
- Mark the drilling points for the wall bracket.
- Drill holes and insert the wall plugs.
- Secure the bracket to the wall using the screws.
- Attach the antenna to the bracket, ensuring it is firmly secured.
- Pole Mounting:
- Attach the U-bolt and clamps to the antenna mounting point.
- Position the antenna on the pole and tighten the nuts on the U-bolt to secure it firmly.
4.3. Connecting the Antenna
- Connect one end of the coaxial cable to the F-connector on the antenna. Ensure the connection is tight and waterproof.
- Connect the other end of the coaxial cable to the "ANT IN" port of the power inserter/amplifier unit.
- Connect another coaxial cable (not always included, may need to be purchased separately) from the "TO TV/RECEIVER" port of the power inserter to the antenna input (ANT IN / RF IN) on your DVB-T/T2 receiver or television.
- Plug the power adapter into the power inserter unit and then into a wall outlet. The power inserter provides the necessary 12V DC power to the active antenna.
The integrated FM signal filter and LTE filter work automatically to reduce interference from FM radio signals and 4G/5G mobile networks, ensuring a clearer DVB-T/T2 signal.
5. Operating Instructions
Once the antenna is installed and connected, you can proceed with scanning for channels on your DVB-T/T2 receiver or television.
- Turn on your DVB-T/T2 receiver or television.
- Navigate to the "Channel Scan" or "Auto Tune" menu option. Refer to your receiver's or TV's manual for specific instructions.
- Initiate the channel scan. The receiver will search for available digital terrestrial channels.
- During the scan, you may need to slightly adjust the antenna's direction to achieve the best signal strength and quality. Use the signal meter on your receiver/TV as a guide.
- Once the scan is complete, save the found channels.
For optimal performance, periodically check for new channels as broadcasting frequencies may change.
6. Maintenance
The STRONG SRT ANT 45 ECO antenna is designed for low maintenance due to its durable, waterproof, and UV-resistant housing.
- Cleaning: If the antenna becomes dirty, gently wipe it with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Inspection: Periodically inspect the antenna and its mounting hardware for any signs of wear, corrosion, or loosening, especially after severe weather conditions.
- Cable Connections: Ensure all coaxial cable connections remain tight and sealed to prevent moisture ingress.
7. Troubleshooting
If you experience issues with your antenna, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No signal or "No Signal" message on TV. |
|
|
| Poor picture quality, pixelation, or freezing. |
|
|
| Cannot find certain channels. |
|
|
8. Specifications
Technical specifications for the STRONG SRT ANT 45 ECO Digital Active DVB-T/T2 Outdoor Antenna:
| Feature | Specification |
|---|---|
| Model Number | 35042795 |
| Antenna Type | Digital Active DVB-T/T2 Outdoor Antenna |
| Frequency Range | UHF/VHF (Specific range not provided, typical for DVB-T/T2) |
| Impedance | 50 ohms |
| Built-in Filters | FM Signal Filter, LTE Filter |
| Power Supply | DC 12V (via power inserter) |
| Color | Metallic Silver |
| Resistance | Waterproof, UV Resistant |
| Dimensions (approx.) | Not explicitly stated in input, but generally compact for outdoor antennas. |
9. Warranty and Support
STRONG products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official STRONG website. Keep your proof of purchase for warranty claims.
For technical support or further assistance, please visit the official STRONG website or contact their customer service department. Contact details can usually be found on the product packaging or the manufacturer's website.
