Project E Beauty Portable Rechargeable Galvanic Device

Introduction

The Project E Beauty Portable Rechargeable Galvanic Device is designed to provide a natural and non-invasive method for skin care. It utilizes galvanic current to deeply cleanse the skin, reduce impurities, and enhance the absorption of nutrients and creams. This device is beneficial for improving skin texture, firming the skin, reducing redness, smoothing out wrinkles, increasing blood circulation, and eliminating acne-causing oil. It offers a safe and effective way to achieve beautiful skin without the need for surgeries, chemical peels, or injections.

Safety Information

Before using the device, ensure all jewelry and metal objects are removed from your person. This is a crucial step to prevent interference with the galvanic current. Always follow the instructions carefully to ensure safe and effective use.

Product Components

The Project E Beauty Galvanic Device comes with two interchangeable probes to cater to different facial areas:

• Roller Probe: Ideal for broad areas such as the face and neck.
• Ball Probe: Perfect for smaller, more delicate areas like around the nose, eyes, and mouth.

Figure 1: The Project E Beauty Portable Rechargeable Galvanic Device, including the main unit, roller probe, and ball probe.

Figure 2: The device with the ball probe attached, demonstrating its compact design and highlighting its dual function and multiple intensity settings.

Setup

1. Cleanse Skin: Thoroughly wash and dry your face before beginning any treatment.
2. Disinfect Probe: Use 70% alcohol to disinfect the chosen probe (roller or ball) before each use.
3. Attach Probe: The probes are attached by aligning them with the unit and pressing down onto the USB-like jack until securely in place.
4. Power Source: The device can be connected to an electrical outlet for continuous use or charged for wireless operation.

Operating Instructions

The device features two main modes: Disincrustation (Extraction) and Iontophoresis (Infusion).

Figure 3: Visual representation of the Extraction Mode (negative galvanic current) and Infusion Mode (positive galvanic current).

Mode 1: Disincrustation (Deep Cleansing)

This mode uses negative galvanic current to soften skin, emulsify sebum and keratin, and prepare pores for deep cleansing by eliminating dead skin cells, makeup, and dust.

1. Press the ON/OFF button to power on the device.
2. Press the Negative (-) button to activate the Disincrustation mode. The red LED light will illuminate, indicating the device is operating in this mode.
3. Gradually increase the intensity to a comfortable level. You do not need to use the highest setting to achieve results.
4. Ensure your fingers are touching the side electrodes of the device for proper current flow. Place the probe firmly on the skin.
5. Move the device in upward motions across the treatment areas. Never move the unit downwards.
• Forehead: Move from your eyebrows upward to the hairline.
• Cheeks: Begin at the nose and move across the cheek towards the ear.
• Chin & Neck: Move down the chin to the neck, then from the bottom of the neck up to the face and then the forehead.

Mode 2: Iontophoresis (Nutrient Infusion)

This mode uses positive galvanic current to boost deeper skincare penetration, enhancing hydration and nourishment for a radiant glow.

1. Decrease the intensity to 0.5.
2. Apply an ion gel or your preferred serum/cream to the areas you will be working on.
3. Press the Positive (+) button. The blue LED light will illuminate, indicating the device is operating in this mode.
4. Adjust the intensity, starting at a lower level, to a comfortable setting.
5. Ensure your fingers are touching the side electrodes and place the probe firmly on the skin.
6. Move the device in the same upward directions as in the Disincrustation mode:
• Forehead: Move from your eyebrows upward to the hairline.
• Cheeks: Begin at the nose and move across the cheek towards the ear.
• Chin & Neck: Move down the chin to the neck, then from the bottom of the neck up to the face and then the forehead.
• Around Eyes/Temples: Slowly move from the chin to the bottom of the ear, lift off the skin, and move from the chin to the corners of the mouth. Lastly, move from the corners of the eyes to the temples, to the top of the neck. Lift the device and move from the chin to the top of the neck and down to the armpits.

Treatment Frequency & Duration

Each treatment session should last for 10 minutes. For initial results, perform treatments four times a week. Once desired goals are achieved, reduce usage to twice a week for maintenance.

Maintenance

After each use, clean the probes and the device surface with 70% alcohol to ensure hygiene and longevity of the product. Store the device in a cool, dry place.

Troubleshooting

If you experience any discomfort or a sensation of shock during use, ensure that you have applied sufficient conductive gel or serum to the skin and that your fingers maintain proper contact with the side electrodes. The device requires a complete circuit to function correctly. If issues persist, discontinue use and contact customer support.

Specifications

Warranty and Support

The Project E Beauty Portable Rechargeable Galvanic Device typically comes with a 1-year warranty. For any product inquiries, technical support, or warranty claims, please visit the official Project E Beauty store or contact their customer service directly.

Visit the Project E Beauty Store on Amazon