Orbit 62120

Orbit 62120 Garden Enforcer Motion-Activated Sprinkler User Manual

Model: 62120

Introduction

The Orbit 62120 Garden Enforcer Motion-Activated Sprinkler is designed to protect your landscapes and gardens from unwanted animals. This device combines a motion-activated spray with noise to deter pests. It also features a timed watering function for convenient garden irrigation.

Safety Information

Please read all instructions carefully before operating the device. Ensure the sprinkler is placed in a stable position to prevent tipping. Do not direct water spray towards electrical outlets or equipment. Keep out of reach of children and pets when in operation to avoid accidental activation or injury. Always disconnect from the water source before performing any maintenance or adjustments.

Package Contents

Verify that all components are present before beginning assembly:

Orbit Garden Enforcer Sprinkler with Tripod
Image: The Orbit Garden Enforcer Motion-Activated Sprinkler, showing the main unit mounted on a tripod stand.

Setup

  1. Assemble the Tripod Stand: Extend the legs and secure them firmly. Ensure the stand is stable on a flat surface.
    Close-up of Orbit Garden Enforcer tripod base
    Image: A close-up view of the tripod base, showing the sturdy leg design for stability.
  2. Install Batteries: Locate the battery compartment on the sensor unit. Insert 4 AA batteries, ensuring correct polarity.
    Close-up of Orbit Garden Enforcer sensor unit
    Image: A detailed view of the sensor unit, highlighting the control dials and the motion sensor dome.
  3. Connect to Water Source: Attach a standard garden hose to the inlet connection at the base of the sprinkler unit. Ensure a tight, leak-free connection.
    Orbit Garden Enforcer connected to a garden hose in a garden setting
    Image: The Orbit Garden Enforcer set up in a garden, with a green garden hose connected to its base, ready for operation.
  4. Position the Sprinkler: Place the sprinkler in the desired area, ensuring the sensor has a clear line of sight to the area you wish to protect. The sensor detects movement up to 40 feet away.

Operating Instructions

The Garden Enforcer offers both motion-activated deterrence and timed watering capabilities.

Motion-Activated Deterrence

The heat and motion-activated sensor triggers a burst of water when movement is detected within its range. This feature is effective for deterring animals from specific areas.

Orbit Garden Enforcer in action, spraying water
Image: The Orbit Garden Enforcer actively spraying water, demonstrating its deterrent function in a garden.

Video: Orbit Garden Enforcer Motion Sensor Sprinkler Overview

This video provides a comprehensive overview of the Orbit Garden Enforcer Motion Sensor Sprinkler, demonstrating its features and how it operates to deter animals.

Timed Watering Feature

In addition to animal deterrence, the Garden Enforcer can be used for timed watering. This allows you to water your garden for 30 minutes at a time.

Hand adjusting the Orbit Garden Enforcer sprinkler head
Image: A hand adjusting the sprinkler head of the Orbit Garden Enforcer, showing the manual adjustment capability for spray direction.

Maintenance

Troubleshooting

ProblemPossible CauseSolution
Sprinkler not activating.Low or dead batteries; sensor obstructed; range too low; unit in OFF mode.Replace batteries; clear sensor path; increase range setting; set to DAY, NIGHT, or ALWAYS.
Weak water spray.Low water pressure; clogged sprinkler head; kinked hose.Check water supply pressure; clean sprinkler nozzle; straighten hose.
Unit sprays continuously.Sensor constantly detecting movement; faulty sensor.Adjust placement to avoid constant detection; contact support if sensor is faulty.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the official Orbit website or contact their customer service. Keep your purchase receipt for warranty claims.

Orbit Official Website: www.orbitonline.com

Related Documents - 62120

Preview Orbit Garden Enforcer Motion Activated Sprinkler User Manual
Comprehensive guide to setting up, operating, and troubleshooting the Orbit Garden Enforcer motion-activated sprinkler. Learn about its features, installation, and optimal usage for pest deterrence and garden watering.
Preview Orbit Yard Enforcer Motion-Activated Sprinkler: Installation and Operation Guide
Learn how to install, set up, and operate your Orbit Yard Enforcer motion-activated sprinkler to effectively deter pests. This guide covers assembly, operation modes, placement, troubleshooting, and important safety warnings.
Preview Orbit Yard Enforcer Motion-Activated Sprinkler User Manual
Comprehensive guide to installing, operating, and troubleshooting the Orbit Yard Enforcer Motion-Activated Sprinkler (Model 27629). Learn about its features, adjustments, and maintenance for effective pest deterrence.
Preview Orbit Expandable Watering Timer: Installation and Programming Guide
Detailed installation and programming guide for the Orbit Expandable Watering Timer. Covers setup, features like Rain Delay and Manual Watering, troubleshooting tips, and technical specifications for optimal garden irrigation.
Preview Orbit B-hyve WiFi Sprinkler Timer User Manual
Comprehensive user manual for the Orbit B-hyve WiFi Sprinkler Timer, covering installation, app setup, programming, manual operation, and troubleshooting. Learn how to conserve water and manage your irrigation efficiently.
Preview Orbit SunMate Single-Port Digital Timer User Manual and Instructions
Comprehensive guide for the Orbit SunMate Single-Port Digital Timer, covering installation, programming, troubleshooting, and specifications. Learn how to set watering schedules, durations, and frequencies for your garden.