Turtle Wax T246R1
Turtle Wax Power Out Upholstery Cleaner (18 oz) Instruction Manual
Model: T246R1
1. Introduction
The Turtle Wax Power Out Upholstery Cleaner is designed to effectively clean and protect fabric upholstery surfaces in your vehicle and home. This product features a deep cleaning foam infused with OXY cleaners for professional results, targeting tough stains and eliminating odors. It includes a convenient detachable micro-scrub brush for easy application and agitation.
2. Safety Information
WARNING: May cause eye irritation. Avoid contact with eyes. Wash hands immediately after skin contact.
First Aid:
- If in eyes: IMMEDIATELY rinse eyes with plenty of water. Remove any contact lenses if present and continue rinsing for at least 15 minutes. If irritation occurs, get medical attention immediately.
- Keep out of reach of children and pets. Ensure adequate ventilation during use.
3. Setup and Preparation
- Vacuum Surface: Thoroughly vacuum the area to be cleaned to remove any loose dirt or debris.
- Shake Can: Shake the product can well before each use to ensure proper mixing of the cleaning agents.
- Test in Inconspicuous Area: Before full application, test the product on a small, hidden area of the fabric to ensure colorfastness and compatibility.
- Remove Brush (Optional): The micro-scrub brush is detachable. You may remove it for separate use or to clean it.
4. Operating Instructions
- Apply Foam: Hold the can upside down and press the brush head firmly onto the stained area. The deep cleaning foam will be dispensed.
- Scrub: Using the integrated micro-scrub brush, work the foam into the fabric with vigorous, overlapping, circular motions. Ensure the stain is thoroughly covered and agitated.
- Allow to Penetrate: Let the foam penetrate the stain for approximately 30-60 seconds. For tougher stains, allow a slightly longer dwell time, but do not let the product dry on the surface.
- Blot Excess: Use a clean, damp microfiber towel or sponge to blot away excess foam and lifted dirt. Rinse the towel or sponge frequently.
- Dry and Vacuum: Allow the treated area to dry completely. Once dry, vacuum the area to remove any remaining residue and restore the fabric's texture.
- Repeat if Necessary: For stubborn stains, repeat the application process until the stain is removed.
5. Maintenance
- Clean Brush: After each use, detach the micro-scrub brush and rinse it thoroughly under running water to remove any accumulated dirt or product residue. Allow it to air dry before reattaching or storing.
- Storage: Store the product in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is securely fastened.
6. Troubleshooting
| Issue | Solution |
|---|---|
| Stain Not Fully Removed: | Repeat the application and scrubbing process. For very old or stubborn stains, multiple applications may be necessary. Ensure sufficient dwell time for the foam to work. |
| Residue After Drying: | Ensure all excess foam is blotted away with a damp cloth before drying. Once dry, vacuum the area thoroughly to remove any remaining dry residue. |
| Fabric Appears Wet for Too Long: | Avoid over-saturating the fabric. Use just enough foam to cover the stain. Ensure good ventilation in the area to aid drying. |
7. Specifications
- Brand: Turtle Wax
- Model Number: T246R1
- Item Volume: 18 Fluid Ounces (per can)
- Item Weight: 1.8 pounds (per can)
- Product Dimensions: 3 x 3 x 11.8 inches (per can)
- Surface Recommendation: Fabric (Not recommended for velvet, silk, vinyl, or leather without prior testing)
8. Support
For further assistance or product inquiries, please visit the official Turtle Wax website or contact their customer support. Always refer to the product label for the most up-to-date safety and usage instructions.
Official Turtle Wax Store: Visit Store