Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Forte Lighting 1705-01-28 Exterior Wall Light. Please read this manual thoroughly before beginning installation to ensure proper function and safety. Keep this manual for future reference.
Safety Information
WARNING: To avoid the risk of electric shock, always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
If you are unsure about the installation process, consult a qualified electrician. This fixture is designed for 120 Volts AC supply.
Always check your local laws and building codes regarding exterior lighting installations.
Package Contents
Carefully unpack your new light fixture and lay out all parts on a clear surface. Ensure all components listed below are present and undamaged. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.
- Forte Lighting 1705-01-28 Exterior Wall Light Fixture (1)
- Clear Beveled Glass Shades (Included with fixture)
- Installation Hardware (Mounting bracket, screws, wire nuts)
- User Manual (This document)
Figure 1: The Forte Lighting 1705-01-28 Exterior Wall Light, showcasing its traditional design, painted rust finish, and clear beveled glass panels. The fixture is designed to house a single medium base bulb.
Setup and Installation
Before installation, ensure the power is turned off at the circuit breaker. This fixture is designed for outdoor wall mounting.
- Prepare the Mounting Surface: Ensure the electrical box is securely mounted and accessible.
- Attach Mounting Bracket: Secure the mounting bracket to the electrical box using the provided screws. Ensure the bracket is level.
- Make Electrical Connections: Connect the fixture's wires to the house wiring.
- Connect the black wire (hot) from the fixture to the black wire (hot) from the electrical box using a wire nut.
- Connect the white wire (neutral) from the fixture to the white wire (neutral) from the electrical box using a wire nut.
- Connect the green or bare copper wire (ground) from the fixture to the ground wire from the electrical box or the ground screw on the mounting bracket using a wire nut.
Ensure all wire nuts are securely tightened.
- Mount the Fixture: Carefully push the wired fixture onto the mounting bracket, aligning the fixture's screws with the holes on the bracket. Secure the fixture in place with the decorative nuts or screws.
- Install Light Bulb: Insert one medium base incandescent bulb (not included) into the socket. Do not exceed the maximum wattage specified on the fixture label.
- Restore Power: Once installation is complete, turn the power back on at the circuit breaker.
Figure 2: The Forte Lighting 1705-01-28 Exterior Wall Light shown mounted on an exterior wall, demonstrating its compact size and how it protrudes from the surface.
Operation
The Forte Lighting 1705-01-28 Exterior Wall Light operates via a standard wall switch (not included). Once installed and powered, the light can be turned on and off using the connected switch.
- Power On/Off: Use the wall switch to control the light.
- Bulb Type: This fixture uses one medium base incandescent bulb. For optimal performance and energy efficiency, consider using an LED equivalent.
- Lighting Method: The fixture provides up/down light, illuminating both above and below the unit.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your exterior wall light. Always ensure power is disconnected before performing any maintenance.
- Cleaning: Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Bulb Replacement: If the bulb burns out, turn off the power at the circuit breaker. Allow the bulb to cool before carefully unscrewing it. Replace with a new medium base bulb of the appropriate wattage.
- Inspection: Periodically inspect the wiring and connections for any signs of wear or damage. Ensure the fixture remains securely mounted.
Figure 3: A closer view of the Forte Lighting 1705-01-28, highlighting the clear beveled glass panels and the open bottom design, which helps prevent accumulation of debris.
Troubleshooting
If you encounter issues with your Forte Lighting 1705-01-28 Exterior Wall Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Fixture is hot to the touch. |
|
|
If the problem persists after attempting these solutions, contact a qualified electrician or Forte Lighting customer support.
Specifications
| Model Number | 1705-01-28 |
| Brand | FORTE |
| Dimensions (H x L x W) | 9 x 4.5 x 9 inches |
| Item Weight | 1.95 pounds |
| Color/Finish | Painted Rust |
| Material | Glass, Metal |
| Shade Material | Glass (Clear Beveled) |
| Number of Light Sources | 1 |
| Light Source Type | Incandescent (Medium Base) |
| Voltage | 120 Volts |
| Power Source | Corded Electric |
| Mounting Type | Protruding (Wall Mount) |
| Included Components | Installation Hardware |
| UPC | 093185004741 |
Warranty and Support
This Forte Lighting 1705-01-28 Exterior Wall Light is backed by a limited one-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or missing parts, please contact Forte Lighting customer service. Keep your proof of purchase for warranty validation.
Manufacturer: Forte Lighting
Please refer to the product packaging or manufacturer's website for the most current contact information.
