1. Introduction and Overview
This PWR+ car charger is designed to provide power to compatible portable DVD players from a 12V DC accessory outlet, commonly found in vehicles such as cars, airplanes, or boats. It features an extended 5.5-foot cord for flexible placement and convenience.
Key Features:
- 5.5 Ft (1.67 meters) power cord.
- Designed for 12V DC outlets.
- UL Listed for safety.
Compatibility: This charger is compatible with various portable DVD players, including but not limited to:
- DBPOWER 9.5" Portable DVD Player (THX-120100KE)
- Sylvania 7", 9", 10" models (e.g., SDVD1023, SDVD7002, SDVD7040)
- APEMAN PV760, PV1570
- FUNAVO 918A
- COOAU CU-101, CU-103, CU-903
- DR. J Professional 12.5"
- ieGeek IK9, IK-102
- TENKER PD118, PD918
- WONNIE 9.5", 10.5" (W-US912, W-US1012)
Please verify your device's power input specifications and connector type for compatibility.
Image: A portable DVD player, representative of compatible devices.
2. Setup Instructions
Follow these steps to properly connect your PWR+ car charger to your portable DVD player and vehicle:
- Verify Compatibility: Ensure your portable DVD player requires a 12V DC input and uses a barrel connector. This charger is not a USB charger.
- Connect to DVD Player: Insert the barrel connector end of the PWR+ car charger into the DC input port of your portable DVD player. Ensure a snug fit.
- Connect to Vehicle: Insert the car charger plug into your vehicle's 12V DC accessory outlet (often referred to as a cigarette lighter socket).
- Confirm Power: A red indicator light on the car charger plug should illuminate, signifying that power is being supplied to your DVD player.
Image: A visual reminder that this charger uses a barrel connector, not a USB connection.
Image: The PWR+ car charger, showing the plug and barrel connector.
3. Operating Instructions
Once the PWR+ car charger is correctly connected to both your portable DVD player and the vehicle's 12V DC outlet, it will begin supplying power. Your DVD player can be operated normally while connected to the charger.
- Ensure the vehicle's ignition is on or the 12V DC outlet is active to provide power.
- To discontinue use, first disconnect the car charger plug from the vehicle's 12V DC outlet, then disconnect the barrel connector from the portable DVD player.
4. Maintenance
Proper care and maintenance will extend the life of your PWR+ car charger:
- Cleaning: Keep the charger clean and free from dust and debris. Use a dry, soft cloth for cleaning.
- Storage: Store the charger in a cool, dry place when not in use. Avoid extreme temperatures.
- Cable Care: Do not bend, twist, or kink the power cord excessively, especially near the connectors. This can damage the internal wiring.
- Moisture: Avoid exposing the charger to water or high humidity.
5. Troubleshooting
If you encounter issues with your PWR+ car charger, consider the following:
- Charger Not Powering Device:
- Ensure the vehicle's 12V DC outlet is functional. Test it with another known working device if possible.
- Check all connections to ensure they are secure and fully inserted into both the DVD player and the vehicle outlet.
- Verify that your portable DVD player's power requirements (voltage and amperage) match the charger's output specifications.
- Inspect the charger cord and connectors for any visible signs of damage, such as fraying or bent pins.
- Indicator Light Not On:
- Confirm the vehicle's ignition is on or the 12V DC outlet is receiving power. Some vehicle outlets are only active when the engine is running.
- Ensure the charger is fully inserted into the 12V DC outlet.
If troubleshooting steps do not resolve the issue, please refer to the Warranty and Support section.
6. Specifications
| Brand | PWR+ |
| Model Number | 467-PWR56-19501 |
| Connector Type | Barrel Connector |
| Compatible Devices | Portable DVD Players |
| Cord Length | 5.5 Feet (approx. 1.67 meters) |
| Input Voltage | 12V DC (from vehicle accessory outlet) |
| Color | Black |
| Item Weight | 0.06 Kilograms (approx. 2.11 ounces) |
| Safety Certification | UL Listed |
7. Warranty and Support
Warranty Information:
- Refund Policy: This product is covered by a 30-day refund policy from the date of purchase.
- Exchange Warranty: A 24-month exchange warranty is provided for this product.
Customer Support:
PWR+ is a company based in Washington, USA. For any questions, technical assistance, or warranty claims, please contact PWR+ customer support. Refer to your purchase documentation for specific contact details.
Image: PWR+ 2-Year Warranty Badge.
