Introduction
This manual provides instructions for the safe and efficient operation of your Stanley 31181 Outdoor Remote Control System. This system includes two grounded outdoor receivers and one handheld wireless remote control, designed to manage electrical appliances from a distance.
Safety Information
- Outdoor Use Only: Ensure receivers are used in appropriate outdoor, weather-protected locations.
- Electrical Rating: Do not exceed the maximum electrical rating of 8A/125V/1000W 60Hz Tungsten. Overloading can cause damage or fire.
- Grounded Outlets: Always plug the receivers into a grounded outlet.
- Water Exposure: While designed for outdoor use, avoid direct submersion or excessive water exposure. Ensure connections are secure and protected.
- Children and Pets: Keep the remote control and receivers out of reach of children and pets.
- Inspection: Regularly inspect the cords and units for any signs of damage. Discontinue use if damage is found.
Package Contents
- 2 x Stanley Outdoor Remote Control Receivers
- 1 x Stanley Wireless Handheld Remote Control
- 1 x Lithium Ion Battery (pre-installed in remote)
Image: Stanley 31181 Outdoor Remote Control System components, including two grounded outdoor receivers and one handheld remote control.
Setup
- Unpack Components: Carefully remove all items from the packaging.
- Remote Battery: The remote control comes with a pre-installed Lithium Ion battery. Ensure the battery tab (if present) is removed before first use.
- Receiver Placement:
- Select a suitable outdoor location for each receiver, ensuring it is protected from direct heavy rain or standing water.
- Plug each receiver into a standard 3-prong grounded outdoor electrical outlet.
- Connect Appliances: Plug the electrical appliance(s) you wish to control into the grounded outlet(s) on the receiver unit. Ensure the appliance is switched to the "ON" position if it has its own power switch.
- Pairing (if necessary): The units are typically pre-paired. If pairing is required or you wish to re-pair:
- Ensure the receiver is plugged in.
- Press and hold the "ON" button on the remote for the desired channel (e.g., "ON 1" for receiver 1) while simultaneously plugging in the receiver. Hold for approximately 5 seconds until the receiver's indicator light flashes or confirms pairing.
- Repeat for the second receiver using its corresponding remote channel.
Operating Instructions
The Stanley 31181 system allows you to control two separate outdoor appliances wirelessly.
- Turning On/Off: Use the "ON" and "OFF" buttons on the handheld remote control to power your connected devices. Each receiver corresponds to a specific channel on the remote (e.g., "ON 1" for receiver 1, "ON 2" for receiver 2).
- Wireless Range: The transmitter operates through walls and windows with an effective range of up to 80 feet (approximately 24 meters).
- Photocell Feature: The receivers include a built-in photocell option. If activated, this feature will automatically turn the connected device off at dawn, even if you forget to manually switch it off. Consult the receiver unit for specific photocell activation instructions (often a switch or button on the receiver itself).
- Expandability (Command1 System): This system is part of the Command1 series. You can pair additional Command1 remotes and receivers. Select different channels for different areas around your home to avoid interference and manage multiple devices.
Maintenance
- Cleaning: Wipe the units with a dry, soft cloth. Do not use abrasive cleaners or immerse in water.
- Battery Replacement: When the remote control's range decreases or it stops responding, replace the Lithium Ion battery. Refer to the remote's battery compartment for specific battery type and replacement instructions.
- Storage: If storing the units for an extended period, especially during off-season, disconnect them from power and store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn ON/OFF. |
|
|
| Reduced remote range. |
|
|
| Photocell not working. |
|
|
Specifications
| Model Number | 31181 |
| Brand | STANLEY |
| Manufacturer | Stanley timers |
| Electrical Rating | 8A/125V/1000W 60Hz Tungsten (UL/CUL) |
| Cord Length | 8 inches |
| Wire Gauge | AWG 14/3 SJTW |
| Wireless Range | Up to 80 feet (24 meters) |
| Remote Battery Type | 1 Lithium Ion battery (included) |
| Product Dimensions | 6 x 5 x 2 inches (approximate, for entire package) |
| Item Weight | 13.6 ounces |
Warranty Information
For specific warranty details, please refer to the warranty card included with your product or visit the official STANLEY website. Generally, products are covered against defects in materials and workmanship for a specified period from the date of purchase.
Support
If you encounter any issues or have questions regarding your Stanley 31181 Outdoor Remote Control System, please contact STANLEY customer support. Contact information can typically be found on the product packaging or the official STANLEY website.
You can also visit the STANLEY Store on Amazon for more product information.
