Introduction
This manual provides essential information for the safe and effective use of your UpBright 12V AC/DC Adapter. This adapter is designed to provide power to compatible X Rocker Pro Wireless Game Chairs and other specified devices. Please read these instructions thoroughly before use and retain them for future reference.
Image: The UpBright 12V AC/DC Adapter, showing the main power brick and attached DC output cable with barrel connector.
Compatibility
The UpBright 12V AC/DC Adapter is compatible with various X Rocker Pro Wireless Game Chair models, including but not limited to:
- X Rocker Pro Wireless Game Chair models: 51396, 51492, 51458, 51371
- XRocker Pro Series H3 models: 51259, 5129101, 51092
- Spider Pedestal Video Gaming Chair models: 51231, 61396
Important Note: This adapter is specifically designed for 12V devices. It is NOT compatible with 5V versions of these chairs or other devices requiring 5V power. Please verify your device's voltage requirements before connecting.
The adapter features a barrel connector with specific dimensions and polarity. Ensure your device's input port matches these specifications:
- Connector Outer Diameter: 5.5mm
- Connector Inner Diameter: 2.5mm (also compatible with 2.1mm)
- Polarity: Center Positive (+)
Image: Diagram illustrating the 5.5mm outer and 2.5mm inner diameter of the barrel connector, along with the center positive polarity symbol.
Safety Information and Protection Features
Your UpBright AC/DC Adapter is equipped with multiple protection features to ensure safe operation:
- OVP (Over Voltage Output Protection): Prevents damage to your device from excessive voltage.
- OCP (Over Current Output Protection): Protects against damage from excessive current draw.
- SCP (Short Circuit Output Protection): Safeguards against short circuits.
Always ensure the adapter is used in a well-ventilated area and avoid covering it during operation. Do not expose the adapter to water or extreme temperatures.
Setup Instructions
- Verify Compatibility: Before connecting, confirm that your device requires a 12V DC input and has a compatible barrel connector (5.5mm outer, 2.5mm/2.1mm inner, center positive polarity).
- Connect to Device: Insert the DC barrel connector of the UpBright adapter firmly into the power input port of your X Rocker gaming chair or compatible device.
- Connect to Power Outlet: Plug the AC prongs of the adapter into a standard 100-240VAC 50/60Hz wall power outlet.
- Power On: Once connected, your device should receive power. Refer to your device's manual for specific power-on procedures.
Warning: Incorrect polarity can damage your device. Always ensure the center pin of your device's input matches the adapter's center positive polarity.
Image: A diagram showing the correct (center positive) and incorrect (center negative) polarity symbols for DC power connections.
Operating the Adapter
The UpBright 12V AC/DC Adapter operates automatically once connected to a power source and a compatible device. No user intervention is required for its basic function. Ensure the adapter is not obstructed to allow for proper heat dissipation.
Care and Maintenance
- Keep the adapter clean and dry. Avoid exposure to moisture, dust, and dirt.
- Do not drop, bend, or apply excessive force to the adapter or its cables.
- Store the adapter in a cool, dry place when not in use.
- Disconnect the adapter from the power outlet during electrical storms or when unused for extended periods.
- Do not attempt to open or repair the adapter. Refer servicing to qualified personnel.
Troubleshooting
If your device is not receiving power, perform the following checks:
- Check Connections: Ensure both the DC barrel connector and the AC plug are securely inserted.
- Verify Power Outlet: Test the wall outlet with another device to confirm it is functional.
- Confirm Compatibility: Double-check that your device's voltage, amperage, and connector specifications match the adapter's output. Remember, this adapter is for 12V devices, not 5V.
- Inspect Adapter: Look for any visible damage to the adapter or cables. If damaged, discontinue use.
If the issue persists after these checks, contact customer support.
Product Specifications
| Feature | Specification |
|---|---|
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 12V DC |
| Output Current | 1.2A - 2A (1200mA - 2000mA) |
| Wattage | 18 Watts |
| Connector Type | Barrel (5.5mm x 2.5mm, compatible with 5.5mm x 2.1mm) |
| Polarity | Center Positive (+) |
| Protection Features | OVP, OCP, SCP |
| Product Dimensions | 3 x 3 x 1 inches |
| Item Weight | 1.6 ounces |
Warranty and Support
This UpBright product comes with a 30-day refund policy and a 24-month exchange warranty. For warranty claims or technical support, please contact the manufacturer directly through their official channels or your point of purchase.