1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your GEORGE KOVACS P5040-084-L Tube LED Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Important Safety Information: Always turn off the main power supply at the circuit breaker before installing or servicing the fixture. Consult a qualified electrician if you are unsure about the installation process.
2. Package Contents
Verify that all components are present before beginning installation.
- LED Wall Sconce Fixture (1)
- Mounting Hardware (1 set)
- Instruction Manual (1)
Figure 2.1: The GEORGE KOVACS P5040-084-L Tube LED Wall Sconce, featuring a brushed nickel finish and an etched opal glass shade.
3. Specifications
| Feature | Detail |
|---|---|
| Model Number | P5040-084-L |
| Dimensions (H x W) | 13.25 inches x 4.75 inches |
| Weight | Approximately 3.68 lbs |
| Material | Aluminum Casting, Steel, Glass |
| Finish | Brushed Nickel |
| Shade Material | Etched Opal Glass |
| Light Source | Integrated LED Module |
| Wattage | 12 Total Watts |
| Lumen Output | 633 Lumens |
| Color Temperature | 3000K (Warm White) |
| CRI | 92 |
| Dimmable | Yes |
| Voltage | 120 Volts |
| Certifications | ETL Certified, Title 24, ADA Compliant |
| Location Use | Damp Rated (Indoor) |
Figure 3.1: Dimensional view of the wall sconce, illustrating its height and width for installation planning.
4. Setup and Installation
Before you begin: Ensure the power is OFF at the circuit breaker. This fixture is designed for wall mount installation to an existing junction box (junction box not included).
- Prepare the Area: Turn off power at the main electrical panel. Clear the installation area.
- Mount the Mounting Plate: Attach the mounting plate (included in hardware) to the junction box using the provided screws. Ensure it is securely fastened.
- Make Electrical Connections:
- Connect the green or bare copper ground wire from the fixture to the green or bare copper ground wire from the junction box.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the black wire from the fixture to the black (hot) wire from the junction box.
- Secure all connections with wire nuts (provided).
- Secure the Fixture: Carefully tuck all wires into the junction box. Align the fixture with the mounting plate and secure it using the provided screws.
- Install the Glass Shade: Gently slide the etched opal glass shade onto the fixture, ensuring it is properly seated and secured according to the design.
- Restore Power: Turn the power back ON at the main electrical panel.
Figure 4.1: Detailed view of the sconce's base and glass shade, illustrating the aesthetic and potential attachment points.
5. Operating Instructions
The GEORGE KOVACS P5040-084-L Tube LED Wall Sconce is designed for simple operation.
- Power On/Off: Operate the fixture using a standard wall switch connected to the electrical circuit.
- Dimming Functionality: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed on the circuit. Follow the dimmer switch manufacturer's instructions for proper operation.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your wall sconce.
- Cleaning:
- Ensure the power is OFF before cleaning.
- Wipe the fixture with a soft, dry cloth.
- For the glass shade, use a mild glass cleaner applied to a cloth, then wipe the shade. Avoid spraying cleaner directly onto the fixture.
- Do not use abrasive cleaners or solvents, as these may damage the finish.
- LED Module: The LED module is integrated and designed for long-term use. It is not user-replaceable. If the LED module fails, contact customer support for assistance.
7. Troubleshooting
If you experience issues with your wall sconce, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. |
|
|
| Light flickers or dims inconsistently. |
|
|
| Fixture makes humming noise. |
|
|
8. Warranty and Support
Warranty: This GEORGE KOVACS fixture comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
For warranty claims or technical support, please contact GEORGE KOVACS customer service. Please have your model number (P5040-084-L) and proof of purchase available.
Manufacturer: Minka Lighting LLC.
For more information, visit the official GEORGE KOVACS Store.
