Keter Gulliver Storage Cabinet User Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Keter Gulliver Storage Cabinet. Designed for both indoor and outdoor use, this durable and waterproof cabinet offers an efficient solution for organizing various items in your living room, garage, laundry room, balcony, or garden.

Please read this manual thoroughly before assembly and use to ensure proper installation and to maximize the lifespan of your product. Keep this manual for future reference.

Figure 1: Keter Gulliver Storage Cabinet (Taupe) with closed doors. This image shows the overall appearance of the assembled cabinet.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the product:

• Ensure all components are present and undamaged before beginning assembly.
• Assemble the cabinet on a flat, stable surface to prevent tipping.
• Do not exceed the maximum weight limit per shelf (15 kg). Distribute weight evenly.
• Keep small parts and packaging materials away from children to avoid choking hazards.
• Do not climb on or hang from the cabinet.
• If using outdoors, ensure the cabinet is placed on a level surface and consider anchoring it if in a windy area, although it features strong metal hinges for door stability.
• Avoid storing flammable or hazardous materials inside the cabinet.

3. Package Contents

Before starting assembly, verify that all parts listed below are included in your package. Each component is typically numbered for easy identification during assembly.

• Side Panels (2)
• Top Panel (1)
• Bottom Panel (1)
• Back Panels (Multiple sections)
• Doors (2)
• Adjustable Shelves (5)
• Handles (2)
• Hinges and Fasteners (Screws, pins, etc.)
• Legs/Base Supports (4)
• Assembly Instruction Manual (This document)

Note: In case of missing or damaged parts, please contact Keter customer support.

4. Assembly Instructions

Assembly of the Keter Gulliver Storage Cabinet is required. Follow these general steps, referring to the detailed diagrams provided with your product for specific part identification and connection points. It is recommended to have a second person assist with assembly for stability.

1. Prepare the Area: Clear a spacious, flat, and clean area for assembly. Lay down a blanket or cardboard to protect the cabinet parts and your floor.
2. Identify Components: Unpack all parts and identify them using the numbering system provided in the product's specific assembly guide.
3. Assemble the Base: Attach the legs/base supports to the bottom panel. Ensure they are securely fastened.
4. Attach Side Panels: Connect the side panels to the bottom panel. Ensure they are correctly oriented.
5. Install Back Panels: Slide or snap the back panels into the grooves of the side and bottom panels.
6. Attach Top Panel: Secure the top panel to the side and back panels.
7. Install Shelves: Insert the shelf supports into the desired slots on the side panels. Place the adjustable shelves onto these supports. You have 5 adjustable shelves to customize your storage space.
8. Attach Doors: Mount the doors to the cabinet using the provided hinges. Ensure the doors swing freely and align correctly.
9. Install Handles: Attach the handles to the doors.
10. Final Check: Verify that all connections are secure and the cabinet is stable.

Figure 2: Keter Gulliver Storage Cabinets in an outdoor setting, demonstrating potential use cases. One cabinet is shown with its doors open, revealing the adjustable shelves and interior storage capacity.

5. Operating Instructions

The Keter Gulliver Storage Cabinet is designed for straightforward use.

• Opening/Closing Doors: Use the integrated handles to open and close the hinged doors. Ensure doors are fully closed to protect contents, especially when used outdoors. The strong metal hinges help prevent unintentional opening.
• Adjusting Shelves: The cabinet features 5 adjustable shelves. To reposition a shelf, carefully remove items, lift the shelf, remove its supports, and reinsert the supports into the desired slots before placing the shelf back.
• Loading Items: Distribute weight evenly across the shelves. Do not place excessively heavy items on a single shelf or concentrate weight in one area. The maximum weight limit per shelf is 15 kg.
• Security: The cabinet is designed to be lockable (lock not included). If desired, a padlock can be used to secure the contents.

6. Maintenance and Care

To ensure the longevity and appearance of your Keter Gulliver Storage Cabinet, follow these maintenance guidelines:

• Cleaning: Clean the cabinet with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material.
• Outdoor Use: While waterproof, regular cleaning will help prevent dirt and grime buildup, especially in outdoor environments.
• Inspection: Periodically check all fasteners and connections to ensure they remain tight. Re-tighten if necessary.
• Sun Exposure: The cabinet is designed to resist fading, but prolonged exposure to intense direct sunlight over many years may eventually affect its color.

7. Troubleshooting

8. Specifications

Figure 3: Dimensional overview of the Keter Gulliver Multispace Cabinet, indicating its height (H182cm), depth (D44cm), and width (W80cm).

9. Warranty and Support

Keter products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Keter website. If you encounter any issues or require assistance, please contact Keter customer support through their official channels.

For further information or to register your product, please visit: www.keter.com