Viper 350 PLUS 3105V 1-Way Car Alarm Keyless Entry User Manual

Introduction

The Viper 350 PLUS 3105V is a robust 1-Way Car Alarm and Keyless Entry system designed to provide enhanced security for your vehicle. This system incorporates advanced features such as a FailSafe starter kill and Anti-Carjacking mode, ensuring comprehensive protection. It is engineered for reliability and ease of use, offering peace of mind through its effective deterrent capabilities.

What's Included:

• 3-channel security/keyless entry system
• Two 4-button Transmitters
• Control Center with integrated antenna, Valet switch, and Status LED
• Stinger® DoubleGuard® Shock Sensor

Image: The Viper 350 PLUS 3105V car alarm system components. This image displays the product packaging alongside two black 4-button remote controls. The remote controls feature buttons for lock, unlock, trunk release, and a function button, with a blue LED indicator. The packaging is yellow and black, prominently displaying the "Viper" logo and "Model 3105V 1-Way Security System".

Safety Information

Always prioritize safety during installation and operation. Improper installation can lead to vehicle damage or system malfunction. It is highly recommended that this system be installed by a qualified automotive electronics technician.

• Professional Installation: Due to the complexity of vehicle wiring and electronic systems, professional installation is strongly advised. Attempting self-installation without adequate experience may void warranties or cause damage.
• Battery Handling: The remote controls require 2 AAA batteries. Ensure correct polarity when inserting batteries. Dispose of used batteries responsibly.
• Wiring: Exercise extreme caution when working with vehicle electrical systems. Disconnect the vehicle's battery before beginning any wiring.
• Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Setup and Installation Notes

While professional installation is recommended, understanding the setup process is crucial for proper system function. This section provides general notes on installation.

Component Placement:

• Control Center: This unit combines the antenna, Valet switch, and Status LED. It should be mounted in a location that allows for optimal remote range and visibility of the LED.
• Siren: The Revenger six-tone soft-chirp siren should be mounted securely in the engine bay, away from excessive heat and moisture. The siren is waterproof.
• Shock Sensor: The Stinger® DoubleGuard® Shock Sensor detects impacts. It should be mounted securely to a rigid part of the vehicle's chassis to accurately detect vibrations. Sensitivity is adjustable.

Wiring Considerations:

The system requires connection to various vehicle circuits. Refer to the detailed wiring diagram provided with your product for specific connections. Key connections include:

• Power and Ground
• Ignition and Accessory Wires
• Door Trigger Inputs
• Trunk Trigger Input
• Parking Light Output
• Starter Kill Circuit (FailSafe starter kill)

Ensure all connections are secure and properly insulated to prevent short circuits and ensure reliable operation.

Operating Instructions

The Viper 350 PLUS 3105V system is operated primarily using the two included 4-button remote controls.

Remote Control Functions:

• Arming the System: Press the Lock button once. The system will chirp once, and the parking lights will flash once, indicating the system is armed and doors are locked. The Status LED will begin flashing slowly.
• Disarming the System: Press the Unlock button once. The system will chirp twice, and the parking lights will flash twice, indicating the system is disarmed and doors are unlocked. The Status LED will turn off.
• Panic Alarm: Press and hold the Panic button (usually the trunk release button or a dedicated panic button) for approximately 3 seconds. The siren will sound, and the parking lights will flash. To stop the panic alarm, press any button on the remote.
• Trunk Release: If connected, press and hold the Trunk Release button for 3 seconds to open the vehicle's trunk.

System Features:

• FailSafe Starter Kill: This feature automatically disables the vehicle's starter when the alarm is armed, preventing unauthorized starting.
• Anti-Carjacking Mode: This security feature can be activated to prevent vehicle theft during a carjacking incident. Consult the full user manual for activation and deactivation procedures.
• Status LED: The bright blue Status LED provides visual indication of the system's armed status and can deter potential thieves. It also provides diagnostic information.
• Parking Light Flash: The system flashes the vehicle's parking lights for visual confirmation of arming/disarming and during an alarm event.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your Viper security system.

Remote Control Battery Replacement:

The 4-button remote controls are powered by 2 AAA batteries. When the remote's range decreases significantly or the LED indicator on the remote becomes dim, it's time to replace the batteries.

1. Locate the battery compartment on the back of the remote control.
2. Open the compartment cover.
3. Remove the old AAA batteries.
4. Insert two new AAA batteries, ensuring correct polarity (+ and -).
5. Close the battery compartment cover securely.

Shock Sensor Sensitivity Adjustment:

The Stinger® DoubleGuard® Shock Sensor's sensitivity can be adjusted to prevent false alarms or to ensure adequate detection. This adjustment is typically done via a dial or button on the sensor unit itself. Consult your installer or the detailed product manual for the exact procedure.

General Care:

• Keep remote controls dry and away from extreme temperatures.
• Periodically check wiring connections for security, especially after vehicle maintenance.
• Clean the exterior of the components with a soft, damp cloth. Do not use harsh chemicals.

Troubleshooting

This section addresses common issues you might encounter with your Viper 350 PLUS 3105V system.

For more detailed troubleshooting steps and diagnostic codes (if applicable), please refer to the comprehensive user manual provided with your Viper 3105V system or contact Viper customer support.

Specifications

Warranty and Support

For specific warranty information regarding your Viper 350 PLUS 3105V system, please refer to the warranty card included with your product at the time of purchase. Warranty terms and conditions typically cover manufacturing defects and vary by region and retailer.

Customer Support:

If you require technical assistance, have questions about installation, or need to report a product issue, please contact Viper customer support. You can often find support contact details on the official Viper website or through the retailer where you purchased the product.

You can also visit the official Viper store for more information and products: Viper Store on Amazon.