Datalogic Gryphon I GD4400 2D

Download PDF
Contents

Datalogic Gryphon I GD4410 2D Imager User Manual

Model: Gryphon I GD4400 2D

1. Introduction

The Datalogic Gryphon I GD4410 2D Imager is a high-performance data collection device designed for general-purpose applications. Part of the Gryphon 4000 Series, this imager integrates advanced 2D reading capabilities with motion-sensing technology to provide a user-friendly and efficient scanning experience.

It is suitable for both handheld and presentation scanning modes, adapting automatically to the operator's actions. The device offers excellent performance in reading various barcode types, including 1D, 2D, postal, stacked, and composite codes like PDF417. High-density models are also available for smaller, condensed codes. Additionally, it supports mobile marketing and ticketing applications by efficiently reading barcodes from mobile devices.

Datalogic Gryphon I GD4410 2D Imager handheld barcode scanner

Figure 1: Datalogic Gryphon I GD4410 2D Imager. This image displays the black and grey handheld barcode scanner with its distinctive ergonomic shape and blue trigger button.

2. Key Features

  • Motionix™ Motion-Sensing Technology: Automatically detects operator actions to switch between handheld and presentation scanning modes.
  • Highly Visible 4-Dot Aimer: Defines a precise reading zone with a center cross for targeted scanning, reducing accidental reads.
  • Omnidirectional Reading: Provides snappy reading performance on all common 1D and 2D codes.
  • Advanced Motion Tolerance Optics: Ensures high-speed imaging and reliable reading of fast-moving codes.
  • Multi-Interface Options: Supports RS-232, IBM 46XX, USB, Keyboard Wedge, and Wand interfaces for versatile connectivity.
  • Datalogic's Patented Green Spot: Provides visual good-read feedback directly on the scanned barcode.
  • Enhanced Capabilities: Includes signature capture and document scanning functionalities, eliminating the need for separate equipment.

3. Package Contents

Upon opening the package, verify that the following items are included:

  • Datalogic Gryphon I GD4410 2D Imager
  • Quick Start Guide (or similar documentation)

Note: The interface cable is not included with the scanner and must be purchased separately to match your specific system requirements.

4. Setup and Installation

4.1 Connecting the Imager

  1. Select the Correct Cable: Ensure you have the appropriate interface cable (USB, RS-232, IBM 46XX, Keyboard Wedge, or Wand) for your host system.
  2. Connect to Imager: Insert the smaller end of the interface cable firmly into the port at the base of the Gryphon I GD4410 imager.
  3. Connect to Host System: Connect the other end of the cable to the corresponding port on your computer, POS terminal, or other host device.
  4. Power On: If your host system requires external power for the scanner, ensure the power supply (if applicable and purchased separately) is connected and the system is powered on. The imager will typically power on automatically upon connection.

4.2 Initial Configuration

The Gryphon I GD4410 is designed for plug-and-play operation in most standard configurations. For specific settings or advanced configurations, refer to the comprehensive Datalogic Gryphon GD4400 Product Reference Guide, which can be downloaded from the official Datalogic website. This guide contains programming barcodes for various settings such as interface type, symbology enabling/disabling, data formatting, and Motionix™ technology preferences.

5. Operating the Imager

5.1 Scanning Barcodes

  1. Handheld Mode:
    • Hold the imager comfortably in your hand.
    • Point the scanning window towards the barcode.
    • Press and hold the blue trigger button. The 4-dot aimer will illuminate, indicating the scanning field.
    • Position the aimer over the entire barcode. The center cross helps with precise targeting.
    • Once successfully read, the Datalogic Green Spot will project onto the barcode, and an audible beep will sound (if enabled).
  2. Presentation Mode (Hands-Free):
    • Place the imager in a compatible stand (sold separately) or on a flat surface with the scanning window facing upwards.
    • Motionix™ technology will detect that the imager is stationary and automatically switch to presentation mode.
    • Present the barcode to the scanning window. The imager will automatically detect and read the barcode.
    • A Green Spot and audible beep will confirm a successful read.

5.2 Reading Barcodes from Mobile Devices

The Gryphon I GD4410 is optimized for reading barcodes displayed on smartphone screens, tablets, and computer monitors. Ensure the screen brightness is sufficient and avoid glare for optimal performance.

5.3 Signature Capture and Document Scanning

For applications requiring signature capture or document scanning, position the imager over the document or signature area. The enhanced optics and high-speed imaging allow for efficient capture. Specific software or application integration may be required to utilize these features fully.

6. Maintenance and Care

6.1 Cleaning the Imager

To ensure optimal performance, keep the scanning window clean. Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive cleaning solution. Do not use harsh chemicals, abrasive cleaners, or excessive liquid, as these can damage the device.

6.2 Storage

Store the imager in a cool, dry place away from direct sunlight and extreme temperatures. Protect it from physical shocks and drops.

7. Troubleshooting

ProblemPossible CauseSolution
Imager does not power on.Cable not connected or faulty; insufficient power from host.Ensure cable is securely connected to both imager and host. Verify host system is powered on. If using RS-232, ensure external power supply is connected. Confirm the cable is functional (note: cable is sold separately).
Imager does not read barcodes.Barcode damaged or poorly printed; incorrect symbology enabled; scanning distance too far/close; dirty scanning window.Try scanning a known good barcode. Ensure the correct symbology is enabled (refer to Product Reference Guide). Adjust distance from barcode. Clean the scanning window.
No Green Spot or beep after scanning.Good-read feedback disabled; imager not configured for audible/visual feedback.Refer to the Product Reference Guide to enable Green Spot and audible feedback.
Imager reads incorrect data.Incorrect interface settings; data formatting issues.Verify the interface settings (e.g., USB HID, USB COM Port Emulation) and data formatting rules using the Product Reference Guide.

8. Specifications

Model NumberGryphon I GD4400 2D
BrandDatalogic
Connectivity TechnologyRS232, USB Cable (Multi-Interface: RS-232 / IBM 46XX / USB or RS-232 / USB / Keyboard Wedge / Wand)
Power SourceCorded Electric
Compatible DevicesDesktop, Laptop
Item Weight11.2 ounces
ASINB00C13PKR2
UPC682017489681
ManufacturerDatalogic
Date First AvailableOctober 6, 2010

9. Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Datalogic website. Warranty terms and conditions may vary by region and product.

For technical support, product documentation, and driver downloads, please visit the Datalogic support portal:

Datalogic Support & Services

You may also contact Datalogic customer service directly for assistance with product inquiries or troubleshooting.

© 2023 Datalogic. All rights reserved. Information in this document is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.